وظيفة مشغل ومبرمج CNC شاغرة لدى Hunting في الظهران
CNC Operation & Programmer
🏢 Hunting
تفاصيل الوظيفة
تعلن شركة Hunting عن توفر وظيفة مشغل ومبرمج ماكينات التحكم الرقمي (CNC Operation & Programmer) في المنطقة الشرقية - الظهران، السعودية. الوظيفة دوام كامل وتتولى مسؤولية تشغيل وبرمجة الماكينات المحوسبة التي تؤدي مهام متنوعة مثل الحفر والقطع وتشكيل المواد.
المهام والمسؤوليات
- إعداد البرامج، وضبط وتشغيل ماكينات CNC لكل مكون.
- تسجيل جميع ساعات العمل بشكل صحيح في نظام تسجيل الوقت.
- الالتزام بإجراءات نظام الجودة (QMS) ونظام الصحة والسلامة والبيئة (HSE) الخاصة بالشركة، وتعليمات العمل.
- الالتزام بسياسة الجودة وسياسة الصحة والسلامة والبيئة.
- التوصية باحتياجات الأدوات والتجهيزات لزيادة كفاءة التصنيع لكل مكون.
- الاستخدام الأمثل للأدوات والقواطع والتجهيزات لتحقيق أقصى إنتاجية.
- توفير جميع معلومات الأدوات المطلوبة وتقليل زمن الدورة لجميع البرامج.
- تصنيع المكونات بدقة وفقاً للرسومات الهندسية والمواصفات ذات الصلة.
- الإبلاغ عن أي مكونات غير مطابقة للمشرفين وإدارة مراقبة الجودة.
- استخدام الأدوات والقواطع المناسبة بناءً على الماكينات.
- إجراء الصيانة الوقائية اليومية للماكينة وفق التعليمات المقررة، والعناية بجميع الماكينات والأدوات والمعدات المستخدمة.
- تعديل معايير التشغيل وبرنامج CNC.
- إيقاف العملية في حال وجود أي انحرافات أو مخاوف تتعلق بجودة المنتج والصحة والسلامة والبيئة.
- المسؤولية عن الحفاظ على الأبعاد حسب الرسم.
- المسؤولية عن الحفاظ على نظافة منطقة الماكينة ومنطقة العمل.
- تعزيز سياسات الصحة والسلامة والبيئة لدى الشركة، والتواصل الفعال حول المخاطر لجميع العاملين وضبط الضوابط اللازمة لسلامتهم.
- أداء جميع المهام وفق إجراءات الجودة وتعليمات العمل لتحقيق أعلى معايير الجودة للمنتجات والخدمات.
- تطوير الذات ضمن الدور والمشاركة في الأنشطة التدريبية والتطويرية المحددة.
- فهم خدمات ومنتجات الشركة.
- بناء علاقات عمل جيدة والحفاظ عليها.
- فهم واستخدام خطوط الإبلاغ الصحيحة.
- العمل لساعات معقولة حسب متطلبات الوظيفة.
- المرونة في السفر عند الحاجة بشكل غير منتظم.
- أداء المهام الإضافية التي تطلب بشكل معقول من وقت لآخر.
الشروط والمتطلبات
- شهادة أو دبلوم ذات صلة في التدريب الصناعي أو التعليم الفني.
- (مستحب) رخصة قيادة سعودية سارية المفعول.
- (مستحب) خبرة لا تقل عن 4 سنوات في دور مماثل.
- قدرة واسعة ومعرفة بتشغيل ماكينات CNC (فريزة/خراطة) والأدوات اليدوية المختلفة مثل الجلاخات.
- (مستحب) فهم عام ومهارات في مكونات ماكينات CNC.
- القدرة على استخدام وقراءة الميكرومتر ومعدات القياس المختلفة.
- القدرة على قراءة وتفسير المستندات والرسومات الميكانيكية.
- القدرة على التحدث واتباع التعليمات باللغة الإنجليزية.
- مهارات تواصل جيدة.
- القدرة على قراءة وتفسير المستندات والرسومات الميكانيكية.
عرض النص الأصلي للإعلان
Job Title: CNC Operation & Programmer
Reporting to: Manufacturing Manager
Nature of the Position: Full Time
Role Overview:
The job holder is responsible for operating and programming computer-programmed machinery that perform a wide variety of functions, such as drilling, cutting, or shaping materials.
Key Responsibilities:
Reporting to: Manufacturing Manager
Nature of the Position: Full Time
Role Overview:
The job holder is responsible for operating and programming computer-programmed machinery that perform a wide variety of functions, such as drilling, cutting, or shaping materials.
Key Responsibilities:
- To make the program, set and operate CNC Machine tools for each component.
- Responsible to Correctly book all working hours on/off the time booking system
- Responsible for Adhere Hunting QMS & HSE system procedures, work instructions.
- Responsible for Adhering to the Quality & HSE Policy.
- To recommend the needs of fixtures and tools for increasing efficiency in machining of each component.
- Responsible for making optimum use of tools/inserts and fixtures for maximum productivity.
- Provide all required tooling information and reduce cycling time for all programs.
- Manufacture components accurately to relevant Engineering drawings and specifications.
- Report any non-conforming components to supervisors and QC Department.
- Authorized to use suitable tools and cutters based on the machines
- Authorized to perform Daily preventive maintenance of machine as per the prescribed instructions. Ensure the care of all machinery, tooling and equipment used.
- Authorized to modify machining parameters and CNC Program
- Authorized to stop the process if any deviations/concerns about product quality and HSE
- Accountable for maintaining dimensions as per the drawing
- Accountable to Keep the machine area and work area clean and tidy.
- Promoting Hunting Health, Safety and Environmental policies, and communicate effective awareness of the risks and hazards to all personnel and maintain controls necessary for their safety and that of others.
- Performing all duties in accordance with the Company’s Quality Procedures and work Instructions in order to deliver and maintain the highest standards of quality for all products and services.
- Developing self within role and participate in and develop from training and developmental activities assigned to oneself.
- Understanding Hunting’s service and product offerings
- Establishing self as a subject matter expert with customer and expert in designated technical/professional discipline
- Creating and maintaining good working relationships
- Understanding and using of the correct reporting lines
- Employees are expected to work whatever reasonable hours are necessary to meet the requirements of their job.
- Travel may be required on an ad hoc basis, so a degree of flexibility is required.
- Ad hoc duties as reasonably required from time to time.
- HSE
- Personal (Development)
- Efficiencies improvement
- Completing allocated jobs on time, i.e. reducing NCR’s, meeting production targets, are completed in a safe manner and to required quality standards
- Relevant certificate or diploma of industrial training or technical education
- Full Saudi Driving License is desirable
- At least 4 years of experience in similar role is desirable
- Extensive Ability and knowledge of operating CNC milling/lathe and various hand tools such as grinders, etc.
- General understanding and skills of CNC machines components is desirable.
- Must be able to use and read Micrometers and various other measuring equipment.
- Ability to read and interpret mechanical documents and drawings.
- Individual must be able to speak and follow instructions in English.
- Good communication abilities.
- Ability to read and interpret mechanical documents and drawings.
المصدر: LinkedIn - أُضيفت للموقع في 19 أغسطس 2026