📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة

Saipem تعلن عن وظيفة مشرف بدء التشغيل في الجبيل

COMMISSIONING SUPERVISOR
🏢 Saipem
🕒 نُشرت: (أمس) 📍 الجبيل وظائف الهندسة والتقنية
التقديم على الوظيفة من المصدر الرسمي ↗

تفاصيل الوظيفة

Saipem، الشركة العالمية الرائدة في الهندسة والبناء لقطاعي الطاقة والبنية التحتية، تعلن عن وظيفة Commissioning Supervisor في الجبيل، السعودية، ضمن فريق العمليات البرية لأنشطة البناء.

نبذة عن الوظيفة

الإشراف على المهام الفنية المتعلقة بإعداد أنشطة ما قبل التشغيل (Pre-commissioning) والتشغيل (Commissioning) والبدء التشغيلي (Start-up) والاختبار التشغيلي (Test run) والتدريب والتشغيل، والتنسيق مع الأقسام الهندسية والمرخصين والموردين والمقاولين من الباطن، مع ضمان الامتثال لمتطلبات الصحة والسلامة والبيئة (HSE).

المهام والمسؤوليات

  • ضمان الامتثال الكامل لمتطلبات الصحة والسلامة والبيئة (HSE) في جميع الأنشطة تحت المسؤولية.
  • تقديم الدعم خلال اجتماعات مراجعة السلامة قبل بدء التشغيل (PSSR) واجتماعات HSE.
  • إجراء ملاحظات السلامة/الجودة الميدانية بشكل متكرر والإبلاغ عن النتائج.
  • دعم إعداد تقارير التقدم.
  • تقديم الدعم أثناء تنفيذ أنشطة ما قبل التشغيل والتشغيل والبدء التشغيلي.
  • تحديد حلول للمشاكل الفنية التي تواجه العمليات والتي لا يمكن حلها بسهولة من قبل فريق العمليات، بما في ذلك قضايا HSE ذات الصلة.
  • تنسيق تحقيقات تحليل السبب الجذري (Root Cause Analysis) وإعداد التقارير ذات الصلة للمشكلات التشغيلية التي تؤثر على HSE وتوافر الأنظمة والإنتاج.
  • تطوير نقل المعرفة والحلول ذات الصلة (مثل التغذية الراجعة حول الحلول وتقييم/تطوير كيفية تطبيق نفس الحل على السفن الأخرى).
  • تقديم نظرة فنية شاملة لأنشطة الإنتاج طوال دورة حياة مرافق الإنتاج، والتوصية بالحلول التي تهدف إلى تحقيق الأهداف، وتسهيل تبادل المعلومات، وتنسيق/تحسين موارد الإنتاج.
  • التنسيق الفني للمسائل التشغيلية مع إدارات الهندسة والمشتريات المؤسسية.
  • إعداد وإدارة تخطيط الصيانة الدورية (الميزانية، التوظيف، المواد، إلخ) بالتعاون مع قسم صيانة الأصول.
  • إدارة التغييرات التي تطرأ على التصميم الأصلي لمرافق الإنتاج بعد التشغيل والتسليم لفريق العمليات.
  • إدارة تنسيق عملية تغيير التصميم بالكامل للمعدات/العمليات على متن المنشأة، وتقديم الدعم الفني ومتطلبات التغيير (مثل HAZID وHAZOP وتقييم المخاطر) مع قسم HSE.
  • تقديم المساعدة الفنية لمدير العروض خلال مرحلة العطاءات لمراعاة جميع الجوانب التشغيلية.
  • تقديم المساعدة الفنية لمدير/فريق ما قبل العمليات خلال مرحلة تنفيذ المشروع لمنشأة إنتاج مستأجرة جديدة.
  • تقديم المساعدة الفنية المستمرة لضمان الانتقال السلس من فريق التشغيل والوثائق والأنشطة (قوائم المتابعة، الوثائق الهندسية المحددة، الأنظمة النشطة/المشغلة، إلخ) إلى بدء أنشطة العمليات العادية.
  • مراجعة والتعليق على أدلة/إجراءات التشغيل.
  • وضع علامات / تحديث الوثائق الهندسية أثناء التشغيل.
  • المشاركة في تحديث الإجراءات/المعايير بشكل دوري لضمان دمج تجربة العمليات.
  • مراجعة خطط/إجراءات HSE.
  • مراجعة إجراءات اختبار التشغيل/أدلة التشغيل.
  • تقديم الدعم في خطط/إجراءات ما قبل التشغيل والتشغيل والبدء التشغيلي بما في ذلك تعليمات التشغيل وملفات النظام (System Dossiers) وغيرها.
  • المشاركة في مراجعات التصميم (مثل HAZOP والنمذجة ثلاثية الأبعاد واجتماعات مراجعة قابلية التشغيل وغيرها).
  • مراجعة قوائم قطع الغيار والمواد الاستهلاكية الخاصة بالتشغيل.
  • إعداد طلبات الشراء والتقييم الفني تحت المسؤولية المباشرة.
  • النطاق البحري: ضمان الاستخدام الكامل والدقيق لنظام CMMS، والتحقق من أوامر العمل، والحفاظ على هيكل المعدات وجداول الصيانة وقطع الغيار؛ تخطيط وجدولة خطط الصيانة المستقبلية؛ التنسيق مع العمليات وHSE والخدمات اللوجستية لتأمين الموارد والتصاريح؛ إدارة الموردين وOEMs في البحر؛ مراقبة مؤشرات الأداء الرئيسية للصيانة (مثل WO backlog وPM compliance وMTTR وMTBF وأداء الموردين) والإبلاغ عنها؛ إجراء التفتيش والتحقق والنزول الميداني؛ متابعة نتائج التدقيق وتنفيذ الإجراءات التصحيحية؛ قيادة/دعم عمليات الإيقاف التشغيلي (Turnarounds)؛ تحسين استراتيجيات الصيانة بناءً على حالة الأصول وتاريخ الصيانة والتغذية الراجعة؛ إدارة مخزون قطع الغيار مع المستودعات/المشتريات؛ قيادة مبادرات الموثوقية (مثل RCFA وتحليل الأداء السيئ وورش عمل RCM) ودعم عمليات إدارة التغيير (MOC)؛ التقاط وتنفيذ الدروس المستفادة في CMMS وخطط العمل واستراتيجيات المعدات؛ مواءمة التنفيذ في البحر مع بيانات CMMS لتحقيق الاتساق في التاريخ والحالة واستخدام المواد.

الشروط والمتطلبات

  • درجة جامعية أو دبلوم في تخصص ذي صلة أو ما يعادلها.
  • خبرة عمل لا تقل عن 5 سنوات.
  • إجادة اللغتين الإنجليزية والعربية.
  • خبرة كبيرة في منصب مماثل في مشاريع النفط والغاز الهندسية والمشتريات والبناء (EPC) أو المصافي.

المزايا

  • حزمة مزايا شاملة (Corporate Benefits).
  • نموذج عمل هجين (إذا كان ذلك مناسبًا) مع خيارات العمل الذكي وساعات عمل مرنة لتحقيق توازن أفضل بين العمل والحياة.
  • نموذج المهارات الشخصية (One Saipem Way) الذي يركز على تطوير المهارات والنمو الوظيفي وفرص الابتكار من خلال التحديات المعقدة وتعزيز التواصل والتعاون لتحقيق الأهداف المشتركة.
عرض النص الأصلي للإعلان
Company Description

Join Saipem and engineer a sustainable future.

We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.

Purpose of the position: As Commissioning Supervisor you will be part of the Onshore Operations within Construction Activities.

Mission

▪ Perform technical tasks assigned by Project Commissioning and Operation Lead, related to the preparation of the pre-commissioning, commissioning, start up, test run, training and operation activities

▪ Interface with engineering disciplines, licensors, vendors and subcontractors

▪ Execute design activities relevant to QA and QC Certification, Fire Fighting System response and control, HSE system control, Integrated Control System development, Production Strategies development, Products Marketing Analysis, Maintainability and Inspection Criteria and Spare Parts Reliability for cost effective and safe operation in the relevant field of interest

▪ Provide engineering support when required

▪ Maintain continuous review of the Production Facilities operations

Tasks

▪ Ensure that all activities under own responsibility are done in full compliance with HSE requirements

▪ Provide support during Pre Start-up Safety Reviews (PSSR) meetings, HSE meetings, etc.

▪ Perform frequent safety/quality observations in field, report findings

▪ Support progress reports' preparation

▪ Provide support during execution of Pre-Comm., Comm., Start-up activities

▪ Identify solutions to techn. problems encountered during operations, which cannot be readily resolved by operations team on board, including also related HSE issues

▪ Coordinate root cause analysis investigations, prepare relevant reports for operational issues which affects HSE, systems availability and production

▪ Develop transfer of knowledge / relevant solutions (e.g. feedbacks on solutions assessing/developing how to implement same solution on other vessels)

▪ Along entire operations life of Production Facilities, provide technical overview of production activities, recommending solutions aimed to guarantee targets achievement, facilitating information exchange, coordinating/optimizing production resources

▪ Provide techn. coordination of operational issues with respect to Corporate Engin./Procur. depts

▪ Together with Asset Maintenance dept prepare/manage planning minimum shut down maintenance (budget, manning, materials, etc.)

▪ Manage change made to Production Facilities original design after commissioning/handing over to operations team

▪ Manage change coordination of entire design change process of process/equipment onboard, provide technical support, changes requirements (i.e. HAZID, HAZOP, Risk Assessment) with HSE dept

▪ During bidding phase, provide techn. assistance to Proposal Manager to consider all operational aspects

▪ During project execution phase of new leased Production Facility, provide technical assistance to Pre-Operations Manager /team

▪ Provide continuous techn. assistance to ensure a smooth transition from commissioning team, deliverables, activities (punch lists, marked-up engineering documents, energized/commissioned systems, etc.) to commencement of normal operations activities

▪ Review/comment operating manual/procedures

▪ Red mark / keep updated engineering documentations during commiss./operations

▪ Participate in regular updating procedures/standards to ensure that operations experience is incorporated

▪ Review HSE plan/procedures

▪ Review test run procedure/operating manuals

▪ Provides support in Precomm., Comm., Start up plans/procedures including operating instructions, System Dossiers, etc.

▪ Participate to design reviews (e.g. HAZOP, 3D model, Commissionability review meetings, etc.)

▪ Review commissioning spare parts/consumables list

▪ Prepare Purchase Requisitions/Techn. Evaluation under own responsibility

Offshore Scope

▪ Ensure full/accurate use of CMMS, validating WOs, maintaining equipment hierarchy, maintenance routines, spares

▪ Plan, schedule, issue look-ahead maintenance plans; coordinate with Operations, HSE, Logistics to secure resources/permits

▪ Manage vendors/OEMs offshore, ensuring scope clarity, schedule adherence, deliverables tracking, reporting

▪ Monitor/report maintenance KPIs (WO backlog, PM compliance, MTTR, MTBF, vendor performance)

▪ Conduct inspections, verifications, walkdowns; follow up on audit findings, implement corrective actions

▪ Lead/support turnarounds (scope, planning, resource readiness, execution, reporting)

▪ Optimize maintenance strategies (plans, frequencies, scope) based on asset condition, CM history, feedback

▪ Manage spares inventory with warehouse/procurement; ensure critical parts availability

▪ Drive reliability initiatives (RCFA, bad actor analysis, RCM workshops), support MOC processes

▪ Capture/implement lessons learned into CMMS, job plans, equipment strategies

▪ Align offshore execution with CMMS data for consistency in history, status, material use

How can you support us?

  • 1
  • 2
  • 3
  • 4
  • 5

What are we looking for?

Education: University degree or diploma in relevant discipline or equivalent

Background: Minimum of 5 year’s work experience

Languages: English, Arabic

Technical Knowledge

Significant experience in a similar position on EPC Oil & Gas projects/ Refinery.

What We Can Offer To You

  • Corporate Benefits: We offer a comprehensive benefits package
  • Hybrid working model: If applicable, Smart Working options and flexible hours to help you achieve a better work-life balance.
  • Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.
  • Location: Jubail, Saudi Arabia

Your opinion helps us grow every day! We would greatly appreciate it if you could share your opinion by completing this short, anonymous survey. https://forms.office.com/e/3sCe293xsf

Additional Information

We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form!

We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.

Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.

Find out more in our career page here and our Instagram profile here.

One vision, many paths, limitless possibilities.
المصدر: LinkedIn - أُضيفت للموقع في 19 يونيو 2026

وظائف أخرى لدى Saipem