وظيفة فني كهرباء لدى الفطيم في السعودية
تفاصيل الوظيفة
تعلن شركة الفطيم للسيارات (Al-Futtaim Automotive) - قسم BYD - في المملكة العربية السعودية عن توفر وظيفة فني كهرباء (Electrical Technician) متخصص في تشخيص وإصلاح الأنظمة الكهربائية والإلكترونية وأنظمة الجهد العالي للمركبات التقليدية والهجينة والكهربائية بالكامل، وذلك وفقاً لمعايير الشركة المصنعة.
نبذة عن الوظيفة
فني الكهرباء هو أخصائي الورشة في الأنظمة الكهربائية والإلكترونية وأنظمة الجهد العالي للمركبات، ويدعم التشخيص والإصلاح المتقدم للمركبات التقليدية والهجينة والكهربائية. تشمل مهامه حل الأعطال الكهربائية المعقدة، وبرمجة وحدات التحكم الإلكترونية (ECU) وتحديثات البرامج، بالإضافة إلى معايرة أنظمة مساعدة السائق المتقدمة (ADAS) وتكوين الأنظمة وفقاً لمعايير الشركة المصنعة. مع تحول الوكلاء نحو المركبات المكهربة والتي تعتمد على البرمجيات، يلعب هذا الدور دوراً حاسماً في ضمان دقة التشخيص وجودة الإصلاح والتعامل الآمن مع أنظمة الجهد العالي.
المهام والمسؤوليات
- تشخيص وإصلاح الأعطال الكهربائية والإلكترونية المعقدة بما في ذلك أنظمة CAN bus ووحدات التحكم في الجسم (BCM) وأنظمة المعلومات والترفيه وإلكترونيات مجموعة نقل الحركة.
- إجراء تتبع متقدم للأعطال باستخدام أدوات التشخيص المعتمدة من الشركة المصنعة (OEM) ومنصات المسح ومعدات الاختبار الكهربائية.
- تنفيذ وميض وحدات التحكم الإلكترونية (ECU flashing) وتحديثات البرامج وبرمجة وحدات التحكم وفقاً لإرشادات الشركة المصنعة.
- إجراء معايرة أنظمة ADAS ومحاذاة الحساسات وبرمجة المفاتيح وبرمجة مانع التشغيل (immobilizer) عند الحاجة.
- تشخيص وخدمة وإصلاح أنظمة الجهد العالي (HV) في المركبات الكهربائية والهجينة، بما في ذلك فحص صحة البطارية واختبار العزل وفحص العاكسات والمحركات الكهربائية وأسلاك الجهد العالي.
- ضمان التعامل الصحيح مع بطاريات الجهد العالي والمكونات المرتبطة بها وتخزينها وصيانتها.
- صيانة ومعايرة أدوات تشخيص الجهد العالي بما في ذلك أجهزة اختبار العزل والمليمتروميتر والمعدات المتخصصة.
- اتباع إجراءات السلامة الصارمة للجهد العالي بما في ذلك بروتوكولات القفل/الوسم (lockout/tagout) وعزل النظام واستخدام معدات الوقاية الشخصية (PPE).
- ضمان إتمام جميع الإصلاحات باستخدام الأساليب والأدوات ومعايير السلامة المعتمدة من الشركة المصنعة.
- توثيق خطوات التشخيص ورموز الأعطال ونتائج الاختبار وإجراءات الإصلاح بدقة في نظام إدارة الوكالة (DMS) وبوابات الضمان المعتمدة من OEM.
- دعم الامتثال للمعايير الفنية لـ OEM ومتطلبات التدقيق وإجراءات تشغيل الوكالة.
- تقديم الدعم الفني للفنيين العامين ومشرفي الورشة في المشكلات الكهربائية والإلكترونية المعقدة.
- رفع الحالات غير المحلولة إلى مهندسي الدعم الفني أو الخطوط الساخنة الفنية لـ OEM عند الحاجة.
- مشاركة المعرفة الفنية وأفضل الممارسات والتعلمات مع فريق الورشة لتحسين القدرات العامة.
- المساهمة في التحديثات الفنية الداخلية والنشرات والتدريب العملي للفنيين المبتدئين.
الشروط والمتطلبات
- دبلوم أو درجة البكالوريوس في الهندسة الكهربائية أو هندسة الإلكترونيات أو هندسة السيارات أو مجال ذي صلة.
- شهادات OEM في التشخيص الكهربائي أو أنظمة المركبات الكهربائية أو سلامة الجهد العالي (مفضلة بشدة).
- خبرة لا تقل عن 4-6 سنوات كفني سيارات مع تخصص قوي في الأنظمة الكهربائية والإلكترونية.
- خبرة مثبتة في التعامل مع التشخيصات المعقدة وبرمجة ECU وحل الأعطال الإلكترونية المتقدمة.
- خبرة عملية مع المركبات الكهربائية أو الهجينة أو الهجينة القابلة للشحن (مفضلة بشدة).
المهارات المطلوبة
- إتقان على مستوى خبير في أدوات التشخيص ومنصات المسح المعتمدة من OEM.
- فهم قوي لشبكات الاتصال في المركبات بما في ذلك أنظمة CAN وLIN وEthernet.
- القدرة على قراءة وتفسير المخططات الكهربائية المتقدمة والرسومات الفنية.
- خبرة في استخدام معدات معايرة ADAS وأدوات برمجة المفاتيح وأدوات التشخيص القائمة على راسم الذبذبات (oscilloscope).
- معرفة عملية بمنصات DMS وأنظمة الضمان وبوابات المرجع الفني لـ OEM.
- إلمام بأنظمة المركبات الكهربائية/الهجينة وأنظمة إدارة البطارية (BMS) وبروتوكولات السلامة.
عرض النص الأصلي للإعلان
Job Requisition ID: 177931
Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.
By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day
Position Summary
The Electrical Technician is the workshop’s specialist in vehicle electrical, electronic, and high-voltage systems, supporting advanced diagnostics and repair across conventional, hybrid, and fully electric vehicles.
The role is responsible for resolving complex electrical faults, performing ECU programming and software updates, and executing ADAS calibration and system configuration in line with OEM standards. As dealerships transition toward electrified and software-driven vehicles, this position plays a critical role in ensuring diagnostic accuracy, repair quality, and safe handling of high-voltage systems.
The Electrical Technician also supports workshop capability by assisting general Technicians with complex cases and contributing to technical knowledge development across the team.
Key Responsibilities
Advanced Electrical Diagnostics
• Diagnose and repair complex electrical and electronic faults including CAN bus systems, body control modules, infotainment systems, and powertrain electronics
• Perform advanced fault tracing using OEM diagnostic tools, scan platforms, and electrical testing equipment
• Execute ECU flashing, software updates, and control module programming in line with manufacturer guidelines
• Carry out ADAS calibration, sensor alignment, key coding, and immobilizer programming where required
EV & Hybrid Systems
• Perform diagnostics, service, and repair of high-voltage (HV) systems in electric and hybrid vehicles
• Conduct battery health checks, isolation testing, and inspection of inverters, electric motors, and HV wiring systems
• Ensure correct handling, storage, and maintenance of HV batteries and related components
• Maintain and calibrate HV diagnostic tools including insulation testers, milliohm meters, and specialized equipment
Quality, Safety & Compliance
• Follow strict high-voltage safety procedures including lockout/tagout protocols, system isolation, and PPE usage
• Ensure all repairs are completed using OEM-approved methods, tools, and safety standards
• Accurately document diagnostic steps, fault codes, test results, and repair actions in the Dealer Management System (DMS) and OEM warranty portals
• Support compliance with OEM technical standards, audit requirements, and dealership operating procedures
Technical Support & Team Development
• Provide technical support to general Technicians and Workshop Supervisors on complex electrical and electronic issues
• Escalate unresolved cases to Technical Support Engineers or OEM technical helplines when required
• Share technical knowledge, best practices, and learnings with the workshop team to improve overall capability
• Contribute to internal technical updates, bulletins, and on-the-job coaching for junior technicians
Educational Requirements
• Diploma or Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Automotive Engineering, or a related discipline
• OEM certifications in electrical diagnostics, EV systems, or high-voltage safety are highly preferred
Experience Requirements
• Minimum 4-6 years of experience as an Automotive Technician with a strong specialization in electrical and electronic systems
• Proven experience handling complex diagnostics, ECU programming, and advanced electronic fault resolution
• Hands-on experience with EV, hybrid, or plug-in hybrid vehicles is strongly preferred
Technical Skills
• Expert-level proficiency in OEM diagnostic tools and scan platforms.
• Strong understanding of vehicle communication networks including CAN, LIN, and Ethernet systems
• Ability to read and interpret advanced electrical wiring diagrams and technical schematics
• Experience using ADAS calibration equipment, key programming tools, and oscilloscope-based diagnostics
• Working knowledge of DMS platforms, warranty systems, and OEM technical reference portals
• Familiarity with EV/HV systems, battery management systems, and safety protocols
About Al-Futtaim Automotive
A major division of the UAE-based Al-Futtaim Group of companies, Al-Futtaim Automotive is an industry leader with presence in 10 countries across the Middle East, Asia and Africa.
Our core business activities at Al-Futtaim Automotive include distribution, manufacturing, leasing and aftersales, and we are firmly established as the regional representative of some of the world’s most iconic automotive brands: Toyota, Lexus, Honda, Jeep, Chrysler, Dodge, Volvo and RAM.
We are driven by a customer-centric approach, constantly pushing the boundaries on innovation, quality standards, and value-added service across our vast universe of customers - right from motoring enthusiasts to fleet operators to contractors. Our mission is to become the leader in custom-made mobility solutions by delivering nothing less than world-class omni-channel experiences.
We channel our local expertise and global trust to deliver one of the most comprehensive portfolios of mobility products and solutions, from passenger cars to SUVs, electric vehicles to high-performance motorbikes, commercial vehicles to industrial & construction equipment.
What keeps the company moving forward is a 9000-member strong team, with inspiring possibilities for growth, throughout the career path. This is Al-Futtaim Automotive and we empower talent to move forward.
رقم الإعلان لدى المصدر: 1389379733