📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة وظائف تناسب سيرتك الذاتيةمجاناً قناة تيليجرام

أكوا باور تعلن عن وظيفة مشغل غرفة تحكم مركزية في السعودية

CCR Operator
🏢 أكوا باور (ACWA Power)
🕒 نُشرت: (أمس) 📍 السعودية وظائف الحرف والعمالة الفنية

تفاصيل الوظيفة

تعلن شركة أكوا باور عن توفر وظيفة مشغل CCR (CCR Operator) في مدينة القريقة (Qurayyah)، وذلك للعمل تحت إشراف مشرف الوردية/مهندس الوردية.

المهام والمسؤوليات

  • الامتثال لقواعد وإجراءات السلامة.
  • الإلمام بمعدات الإطفاء في منطقته.
  • الإلمام بمخططات الأنابيب والأجهزة (P&IDs)، إجراءات التشغيل القياسية (SOPs)، تعليمات العمل، منطق التشغيل والتحكم، وإجراءات التشغيل الطارئة وغيرها من الوثائق ذات الصلة.
  • مراقبة جميع معلمات الوحدة وتسجيل القراءات الدورية في سجلات القراءات.
  • تلخيص جميع الأنشطة/الأحداث التي حدثت خلال ورديته في سجل الوردية.
  • اتباع تعليمات مهندس الوردية ومشرف الوردية والتنسيق مع المشغلين الآخرين بشأن جميع الأنشطة.
  • الانتباه واتخاذ إجراءات سريعة أثناء ظروف التشغيل غير الطبيعية.
  • التنسيق وضمان تطبيق إجراءات الإغلاق والوسم (Lock Out & Tag Out) أثناء عزل المعدات للصيانة وفقًا لإجراءات تصريح العمل (Permit To Work) المعتمدة.
  • إعادة المعدات إلى حالتها الطبيعية بعد إلغاء العزل عند التعليمات.
  • فحص الوحدة والملحقات خلال الوردية للتأكد من أن جميع معلمات المعدات ضمن الحدود المسموحة.
  • الإبلاغ عن المخالفات إلى مشرف الوردية/مهندس الوردية.
  • إجراء اختبارات الحماية الدورية تحت إشراف مهندس الوردية/المشرف وحفظ السجلات.
  • إجراء تبديل المعدات وفقًا للجداول المحددة مسبقًا.
  • رفع طلبات العمل أو ملاحظات العيوب للمعدات المعطلة ومتابعة إصلاح العيوب.
  • المساعدة في تدريب وتعريف المشغلين الجدد.
  • الإبلاغ عن حالات "قرب الحوادث" (near misses) وتنفيذ ضوابط المخاطر المقررة.
  • الإبلاغ عن الانحرافات في نظام إدارة الجودة والصحة والسلامة والبيئة.
  • ضمان اتخاذ إجراءات التخلص المناسبة من النفايات.
  • أداء مهام أخرى حسب التكليف.

الشروط والمتطلبات

  • المؤهل العلمي: دبلوم في الهندسة (إلزامي)، ويفضل بكالوريوس هندسة.
  • الخبرة: 5 سنوات كحد أدنى في نفس المنصب.
  • الشهادات المطلوبة (مرغوب فيها): الإلمام بمعايير ISO9001، ISO14001، OHSAS 18001.
  • ظروف العمل: الاستعداد للعمل في موقع نائي (القريقة).

المهارات المطلوبة

  • الوعي العام بمبادئ نظام إدارة الجودة والصحة والسلامة المهنية والبيئة.
  • معرفة تحديد وتصنيف والتخلص من النفايات.
  • معرفة مراقبة الانبعاثات.
  • معرفة الأثر البيئي والصحي للمواد الكيميائية المستخدمة في المحطة.
  • معرفة معدات مكافحة الحرائق.
  • معرفة معدات الوقاية الشخصية (PPE) ومعدات السلامة.
  • معرفة إجراءات الإسعافات الأولية.
  • إلمام جيد بأنشطة تشغيل محطات الطاقة/المياه.
  • مهارات التواصل بين الأشخاص.
  • مهارات تحليلية.
  • القدرة على تقييم مخاطر الأخطار (Hazard Risk Assessment).
  • معرفة تقييم تأثير الجوانب البيئية (Aspect Impact Assessment).
  • مهارات الحاسوب الأساسية.
عرض النص الأصلي للإعلان

Job Title: CCR Operator            Location:  Qurayyah  

 

Reporting To: Shift Supervisor / Shift Charge Engineer


Job Summary

Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation.


Roles & Responsibilities

 

  • Comply with safety rules and regulations.
  • Be familiar with the fire equipment in his area.
  • Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related documents.
  • Monitor all parameters of the unit and enter periodic readings on log sheets.
  • Summarize all activities/events that took place during his shift in the log book.
  • Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate with other Operators in regard to all activities.
  • Be alert and take quick actions during abnormal operating conditions.
  • Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure.
  • Normalize the equipment after cancellation when instructed to do so.
  • Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits.
  • Report abnormalities to the Shift Supervisor / SCE.
  • Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records.
  • Perform equipment change over according to preset schedules.
  • Raise work requests or defect notes for faulty equipment and follow up for the defect rectification.
  • Assist in the training and familiarization of new operators.
  • Report near misses and implement prescribed risk controls.
  • Report deviations in Quality, Health, Safety and Environmental Management System.
  • Ensure proper waste disposal measures.
  • Perform other duties as assigned.

Job Specifications

Educational

Desired: Diploma in Engineering is a must.

Preferred: Bachelor of Engineering.

 

Minimum Experience

Minimum: 5 years in the same position.

 

Required Skills

  • Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles
  • Knowledge of identification, classification and disposal of waste
  • Knowledge of Emission Monitoring
  • Knowledge of environmental and health impact of chemicals being used in the plant
  • Knowledge of firefighting equipment
  • Knowledge of PPE and safety equipment
  • Knowledge of First aid measures
  • Should be well conversed with Power/Water plant operational activities.
  • Interpersonal communication skills.
  • Analytical skills.
  • Hazard Risk Assessment capability
  • Aspect Impact Assessment knowledge
  • Basic computer skills

 

Desired Certification / Job Specific Skill / Training

ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.


Work Condition

Ready to work in remote location.

 

 

 

المصدر: الموقع الرسمي للجهة - أُضيفت للموقع في 9 أكتوبر 2026
رقم الإعلان لدى المصدر: 1368472923