تفاصيل الوظيفة
أكوا باور تعلن عن وظيفة مشغل غرفة تحكم (Control Room Operator) في المملكة العربية السعودية. يتبع المشغل لمشرف الوردية/مهندس الوردية، ويتولى مسؤولية مراقبة والتحكم في معلمات تشغيل الوحدة/المحطة والتنسيق مع المشغلين الآخرين.
المهام والمسؤوليات
- الامتثال لقواعد وأنظمة السلامة.
- الإلمام بمعدات الإطفاء في منطقته.
- الإلمام بمخططات الأنابيب والأجهزة (P&IDs)، إجراءات التشغيل القياسية (SOPs)، تعليمات العمل، منطق التشغيل والتحكم، وإجراءات التشغيل في الحالات الطارئة وأي وثائق أخرى ذات صلة.
- مراقبة جميع معلمات الوحدة وتسجيل القراءات الدورية في سجلات القراءات.
- تلخيص جميع الأنشطة/الأحداث التي حدثت أثناء نوبة عمله في سجل النوبة (Log Book).
- اتباع تعليمات مهندس الوردية ومشرف الوردية والتنسيق مع المشغلين الآخرين فيما يتعلق بجميع الأنشطة.
- توخي الحذر واتخاذ إجراءات سريعة أثناء ظروف التشغيل غير الطبيعية.
- التنسيق وضمان تطبيق إجراءات العزل والقفل والوسم (Lock Out & Tag Out) أثناء عزل المعدات للصيانة وفقًا لإجراء تصريح العمل (Permit To Work) المعتمد.
- إعادة المعدات إلى حالتها الطبيعية بعد إلغاء العزل عند التعليمات بذلك.
- تفقد الوحدة والملحقات أثناء الوردية للتأكد من أن جميع معلمات المعدات ضمن الحدود المسموح بها.
- الإبلاغ عن أي خلل إلى مشرف الوردية/مهندس الوردية.
- إجراء اختبارات الحماية الدورية تحت إشراف مهندس الوردية/المشرف والحفاظ على السجلات.
- تنفيذ تبديل المعدات وفقًا للجداول الزمنية المحددة.
- رفع طلبات العمل أو ملاحظات العيوب للمعدات المعطلة ومتابعة تصحيح العيوب.
- المساعدة في تدريب وتأهيل المشغلين الجدد.
- الإبلاغ عن حالات الاقتراب من الحوادث (Near Misses) وتنفيذ ضوابط المخاطر المقررة.
- الإبلاغ عن أي انحرافات في نظام إدارة الجودة والصحة والسلامة والبيئة.
- ضمان اتخاذ إجراءات التخلص المناسبة من النفايات.
- أداء المهام الأخرى التي يتم تكليفه بها.
الشروط والمتطلبات
- الحصول على دبلوم في الهندسة (شرط أساسي).
- يفضل بكالوريوس في الهندسة.
- خبرة لا تقل عن 5 سنوات في نفس المنصب.
- الاستعداد للعمل في موقع ناءٍ.
المهارات المطلوبة
- وعي عام بمبادئ نظام إدارة الجودة والصحة والسلامة المهنية والبيئة.
- معرفة بتحديد وتصنيف والتخلص من النفايات.
- معرفة بمراقبة الانبعاثات.
- معرفة بالأثر البيئي والصحي للمواد الكيميائية المستخدمة في المحطة.
- معرفة بمعدات مكافحة الحرائق.
- معرفة بمعدات الوقاية الشخصية (PPE) ومعدات السلامة.
- معرفة بإجراءات الإسعافات الأولية.
- إلمام جيد بالأنشطة التشغيلية لمحطات الطاقة/المياه.
- مهارات التواصل بين الأشخاص.
- مهارات تحليلية.
- القدرة على تقييم مخاطر المخاطر.
- معرفة بتقييم الأثر البيئي (Aspect Impact Assessment).
- مهارات أساسية في استخدام الحاسوب.
- يفضل الالمام/العمل بمعايير ISO 9001، 14001، OHSAS 18001.
عرض النص الأصلي للإعلان
Reporting To: Shift Supervisor / Shift Charge Engineer
Job Summary
Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation.
Roles & Responsibilities
- Comply with safety rules and regulations.
- Be familiar with the fire equipment in his area.
- Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related documents.
- Monitor all parameters of the unit and enter periodic readings on log sheets.
- Summarize all activities/events that took place during his shift in the log book.
- Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate with other Operators in regard to all activities.
- Be alert and take quick actions during abnormal operating conditions.
- Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure.
- Normalize the equipment after cancellation when instructed to do so.
- Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits.
- Report abnormalities to the Shift Supervisor / SCE.
- Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records.
- Perform equipment change over according to preset schedules.
- Raise work requests or defect notes for faulty equipment and follow up for the defect rectification.
- Assist in the training and familiarization of new operators.
- Report near misses and implement prescribed risk controls.
- Report deviations in Quality, Health, Safety and Environmental Management System.
- Ensure proper waste disposal measures.
- Perform other duties as assigned.
Job Specifications
Educational
Desired: Diploma in Engineering is a must.
Preferred: Bachelor of Engineering.
Minimum Experience
Minimum: 5 years in the same position.
Required Skills
- Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles
- Knowledge of identification, classification and disposal of waste
- Knowledge of Emission Monitoring
- Knowledge of environmental and health impact of chemicals being used in the plant
- Knowledge of firefighting equipment
- Knowledge of PPE and safety equipment
- Knowledge of First aid measures
- Should be well conversed with Power/Water plant operational activities.
- Interpersonal communication skills.
- Analytical skills.
- Hazard Risk Assessment capability
- Aspect Impact Assessment knowledge
- Basic computer skills
Desired Certification / Job Specific Skill / Training
ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.
Work Condition
Ready to work in remote location.
رقم الإعلان لدى المصدر: 1368472323