📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة وظائف تناسب سيرتك الذاتيةمجاناً قناة تيليجرام

أكوا باور تعلن عن وظيفة مشغل غرفة التحكم المركزية في السعودية

CCR Operator
🏢 أكوا باور (ACWA Power)
🕒 نُشرت: (منذ 10 أيام) 📍 السعودية وظائف الحرف والعمالة الفنية

تفاصيل الوظيفة

أكوا باور تعلن عن وظيفة مشغل غرفة تحكم (CCR Operator) في السعودية، حيث سيكون مسؤولاً عن مراقبة والتحكم في معلمات تشغيل الوحدة/المحطة والتنسيق مع المشغلين الآخرين.

المهام والمسؤوليات

  • الامتثال لقواعد وأنظمة السلامة، والإلمام بمعدات الإطفاء في منطقته.
  • الإلمام بمخططات الأنابيب والأجهزة (P&IDs)، إجراءات التشغيل القياسية (SOPs)، تعليمات العمل، منطق التشغيل والتحكم، بالإضافة إلى إجراءات التشغيل الطارئة وأي وثائق أخرى ذات صلة.
  • مراقبة جميع معلمات الوحدة وتسجيل القراءات الدورية في سجلات القراءات، وتلخيص جميع الأنشطة/الأحداث التي حدثت أثناء نوبته في سجل النوبة.
  • اتباع تعليمات مهندس النوبة ومشرف النوبة، والتنسيق مع المشغلين الآخرين فيما يتعلق بجميع الأنشطة.
  • اليقظة واتخاذ إجراءات سريعة أثناء ظروف التشغيل غير الطبيعية.
  • التنسيق وضمان تطبيق إجراء القفل والوسم (Lock Out & Tag Out) أثناء عزل المعدات للصيانة وفقًا لإجراء تصريح العمل المعتمد، وإعادة المعدات إلى حالتها الطبيعية بعد إلغاء التصريح عند التعليمات.
  • تفقد الوحدة والملحقات أثناء النوبة للتأكد من أن جميع معلمات المعدات ضمن الحدود المسموحة، وإبلاغ مشرف النوبة/مهندس النوبة عن أي خلل.
  • إجراء اختبارات الحماية الدورية تحت إشراف مهندس النوبة/المشرف، والحفاظ على السجلات، وتنفيذ تبديل المعدات وفقًا للجداول الزمنية المحددة مسبقًا.
  • رفع طلبات العمل أو ملاحظات العيوب للمعدات المعطلة، ومتابعة إصلاح العيوب.
  • المساعدة في تدريب وتأهيل المشغلين الجدد.
  • الإبلاغ عن الحوادث الوشيكة (Near Misses) وتنفيذ ضوابط المخاطر المقررة.
  • الإبلاغ عن الانحرافات في نظام إدارة الجودة والصحة والسلامة والبيئة.
  • ضمان تطبيق إجراءات التخلص السليم من النفايات.
  • أداء المهام الأخرى التي يتم تكليفه بها.

الشروط والمتطلبات

  • دبلوم في الهندسة (إلزامي).
  • يفضل بكالوريوس في الهندسة.
  • خبرة لا تقل عن 5 سنوات في نفس المنصب.
  • يفضل الإلمام بمعايير ISO9001 وISO14001 وOHSAS 18001.
  • الاستعداد للعمل في موقع نائي.

المهارات المطلوبة

  • وعي عام بمبادئ نظام إدارة الجودة والصحة والسلامة المهنية والبيئة.
  • معرفة بتحديد وتصنيف والتخلص من النفايات.
  • معرفة بمراقبة الانبعاثات.
  • معرفة بالأثر البيئي والصحي للمواد الكيميائية المستخدمة في المحطة.
  • معرفة بمعدات مكافحة الحرائق.
  • معرفة بمعدات الوقاية الشخصية (PPE) ومعدات السلامة.
  • معرفة بإجراءات الإسعافات الأولية.
  • إلمام جيد بأنشطة تشغيل محطات الطاقة/المياه.
  • مهارات التواصل بين الأفراد.
  • مهارات تحليلية.
  • القدرة على تقييم مخاطر الخطر (Hazard Risk Assessment).
  • معرفة بتقييم الأثر البيئي (Aspect Impact Assessment).
  • مهارات أساسية في استخدام الحاسوب.
عرض النص الأصلي للإعلان

Job Title                                          CCR Operator
Job location (Department/Plant)    Operations
Reporting to                                    Shift Supervisor/Shift Charge Engineer


Job Summary    - Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation. 

 

Roles & Responsibilities

1    Comply with safety rules and regulations. Be familiar with the fire equipment in his area.
2    Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related     documents.
3    Monitor all parameters of the unit and enter periodic readings on log sheets. Summarize all activities/events that took place during his shift in     the log book.
4    Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate  
    with other Operators in regard to all activities 
5    Be alert and take quick actions during abnormal operating conditions.
6    Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure. Normalize     the equipment after cancellation when instructed to do so.
7    Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits. Report abnormalities to the Shift     Supervisor/ SCE.
8    Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records. Perform equipment change over according to     preset schedules.
9    Raise work requests or defect notes for faulty equipment and follow up for the defect rectification
10    Assist in the training and familiarization of new operators.
11    Report near misses and implement prescribed risk controls.
12    Report deviations in Quality, Health, Safety and Environmental Management System.
13    Ensure proper waste disposal measures.
14    Perform other duties as assigned.


Job Specifications    

Educational
    
1- Desired    Diploma in Engineering is a must.
2- Preferred    Bachelor of Engineering.

 

Experience

Minimum 5 years in the same position. 

 

Required Skills    

1.    Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles
2.    Knowledge of identification, classification and disposal of waste
3.    Knowledge of Emission Monitoring
4.    Knowledge of environmental and health impact of chemicals being used in the plant
5.    Knowledge of firefighting equipment
6.    Knowledge of PPE and safety equipment
7.    Knowledge of First aid measures
8.    Should be well conversed with Power/Water plant operational activities.
9.    Interpersonal communication skills.
10.    Analytical skills.
11.    Hazard Risk Assessment capability
12.    Aspect Impact Assessment knowledge
13.    Basic computer skills


Desired certification / Job specific skill / Training 

ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.


Work Condition    

Ready to work in remote location.

المصدر: الموقع الرسمي للجهة - أُضيفت للموقع في 16 أكتوبر 2026
رقم الإعلان لدى المصدر: 1368486923