تفاصيل الوظيفة
أكوا باور تعلن عن فرصة وظيفية لمشغل غرفة التحكم المركزية (CCR Operator) في قسم العمليات، بالمملكة العربية السعودية.
نبذة عن الوظيفة
مراقبة وضبط معايير تشغيل الوحدة/المحطة، والتنسيق مع المشغلين الآخرين فيما يتعلق بجميع الأنشطة المؤثرة على التشغيل. يتبع الوظيفة مشرف الوردية أو مهندس الوردية المسؤول.
المهام والمسؤوليات
- الالتزام بقواعد الأمن والسلامة وأنظمتها، والإلمام بمعدات إطفاء الحريق في منطقة عمله.
- الإلمام بمخططات P&ID للمحطة، وإجراءات التشغيل القياسية (SOPs)، وتعليمات العمل، ومنطق التشغيل والتحكم، وإجراءات التشغيل في حالات الطوارئ، وأي وثائق ذات صلة أخرى.
- مراقبة جميع معايير الوحدة وتسجيل القراءات الدورية في سجلات المتابعة، وتلخيص جميع الأنشطة والأحداث التي وقعت خلال الوردية في سجل الوردية.
- اتباع تعليمات مهندس الوردية المسؤول ومشرف الوردية، والتنسيق مع المشغلين الآخرين فيما يخص جميع الأنشطة.
- الانتباه واتخاذ إجراءات سريعة في ظروف التشغيل غير الطبيعية.
- التنسيق والتأكد من تطبيق إجراءات العزل والتأشير (Lock Out & Tag Out) عند عزل المعدات للصيانة وفق إجراء تصريح العمل المعتمد (Permit To Work)، وإعادة المعدات إلى وضعها الطبيعي بعد إلغاء التصريح عند التوجيه بذلك.
- تفتيش الوحدة والتجهيزات المساندة خلال الوردية للتأكد من أن معايير جميع المعدات ضمن الحدود المسموح بها، والإبلاغ عن أي انحرافات لمشرف الوردية أو مهندس الوردية المسؤول.
- إجراء اختبارات الحماية الدورية تحت إشراف مهندس الوردية المسؤول أو المشرف، وتوثيق السجلات، وتنفيذ تبديل المعدات وفق الجداول المحددة مسبقاً.
- إصدار طلبات العمل أو ملاحظات العيوب للمعدات المعطلة، ومتابعة إصلاح العيوب.
- المساهمة في تدريب المشغلين الجدد وتعريفهم بالعمل.
- الإبلاغ عن الحوادث الوشيكة (Near Misses) وتطبيق ضوابط المخاطر المعتمدة.
- الإبلاغ عن الانحرافات في نظام إدارة الجودة والصحة والسلامة والبيئة.
- ضمان تطبيق إجراءات التخلص السليم من النفايات.
- أداء أي مهام أخرى يتم تكليفه بها.
الشروط والمتطلبات
- دبلوم في الهندسة (شرط أساسي).
- بكالوريوس في الهندسة (مفضل).
- خبرة لا تقل عن 5 سنوات في نفس المسمى الوظيفي.
- الاستعداد للعمل في موقع نائي.
المهارات المطلوبة
- إلمام عام بمبادئ أنظمة إدارة الجودة والصحة والسلامة المهنية والبيئة.
- معرفة بتحديد النفايات وتصنيفها والتخلص منها.
- معرفة بمراقبة الانبعاثات.
- معرفة بالآثار البيئية والصحية للمواد الكيميائية المستخدمة في المحطة.
- معرفة بمعدات مكافحة الحريق.
- معرفة بمعدات الوقاية الشخصية (PPE) ومعدات السلامة.
- معرفة بإجراءات الإسعافات الأولية.
- إلمام جيد بالأنشطة التشغيلية لمحطات الكهرباء والمياه.
- مهارات تواصل بين الأفراد.
- مهارات تحليلية.
- القدرة على إجراء تقييم المخاطر.
- المعرفة بتقييم الجوانب والآثار البيئية (Aspect Impact Assessment).
- مهارات حاسوبية أساسية.
- المعرفة أو الخبرة العملية بمعايير ISO 9001 و ISO 14001 و OHSAS 18001 مفضلة.
عرض النص الأصلي للإعلان
Position
Job Title CCR Operator
Job location (Department/Plant) Operations
Reporting to Shift Supervisor/Shift Charge Engineer
Job Summary
Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation.
Roles & Responsibilities
S. No. Responsibility
1 Comply with safety rules and regulations. Be familiar with the fire equipment in his area.
2 Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related documents.
3 Monitor all parameters of the unit and enter periodic readings on log sheets. Summarize all activities/events that took place during his shift in the log book.
4 Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate
with other Operators in regard to all activities
5 Be alert and take quick actions during abnormal operating conditions.
6 Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure. Normalize the equipment after cancellation when instructed to do so.
7 Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits. Report abnormalities to the Shift Supervisor/ SCE.
8 Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records. Perform equipment change over according to preset schedules.
9 Raise work requests or defect notes for faulty equipment and follow up for the defect rectification
10 Assist in the training and familiarization of new operators.
11 Report near misses and implement prescribed risk controls.
12 Report deviations in Quality, Health, Safety and Environmental Management System.
13 Ensure proper waste disposal measures.
14 Perform other duties as assigned.
Job Specifications
Educational Desired Diploma in Engineering is a must.
Preferred Bachelor of Engineering.
Minimum Experience Minimum
5 years in the same position.
Required Skills 1. Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles
2. Knowledge of identification, classification and disposal of waste
3. Knowledge of Emission Monitoring
4. Knowledge of environmental and health impact of chemicals being used in the plant
5. Knowledge of firefighting equipment
6. Knowledge of PPE and safety equipment
7. Knowledge of First aid measures
8. Should be well conversed with Power/Water plant operational activities.
9. Interpersonal communication skills.
10. Analytical skills.
11. Hazard Risk Assessment capability
12. Aspect Impact Assessment knowledge
13. Basic computer skills
Desired certification / Job specific skill / Training ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.
Work Condition
Ready to work in remote location.
رقم الإعلان لدى المصدر: 1368483523