Arab Center for Engineering Studies تعلن عن وظيفة مهندس معايرة أول
تفاصيل الوظيفة
مركز الدراسات الهندسية العربي (ACES) يعلن عن حاجته إلى مهندس معايرة أول (Senior Calibration Engineer) للانضمام إلى فريقه في مدينة الخبر، الشرقية، المملكة العربية السعودية. المركز شركة هندسية متخصصة رائدة في منطقة الشرق الأوسط.
نبذة عن الوظيفة
تنسيق أنشطة فحص الإنشاءات مع الفنيين والعملاء، والتأكد من جاهزية المختبرات الميدانية من حيث مواصفات المعدات وشهادات المعايرة وغيرها. إصدار تقارير الفحص، والتأكد من إجراء جميع الاختبارات وفق المواصفات المطلوبة، وقيادة الفريق تحت الإشراف المباشر وتحفيزه للحفاظ على كفاءته.
المهام والمسؤوليات
- تطبيق سياسات الشركة وأهدافها وإجراءاتها، والمساندة في تطويرها عند الحاجة.
- الإشراف على تنفيذ خطة العمليات والسياسات والإجراءات وخطط الانتقال والترحيل.
- دعم رئيس المعايرة الفنية في إدارة الموارد والتحكم في التكاليف وإعداد الميزانيات.
- مراقبة التكاليف والموارد في الأنشطة اليومية.
- تجنب أي تضارب في المصالح قد يؤثر على الحيادية، وتقديم تقييمات موضوعية وغير متحيزة للمعدات، مع ضمان إجراء جميع المعايرات وفق أعلى المعايير دون أي تأثير خارجي.
- الحفاظ على سرية جميع البيانات ونتائج المعايرة، بما في ذلك التعامل الآمن مع المعلومات الحساسة وتخزينها.
- الرد على استفسارات العملاء المتعلقة بتقدم أعمال المعايرة وإعداد التقارير.
- إعداد تقارير المعايرة والتحقق منها مبدئياً قبل رفعها للاعتماد من رئيس المعايرة.
- تحليل البيانات واتخاذ الإجراءات التصحيحية لمنع حدوث عناصر غير مطابقة.
- وضع جداول زمنية للمعايرة والإشراف على الأعمال التي ينفذها المشرف والفنيون.
- التواصل مع موردي المعدات ومقدمي الخدمة وجهات المعايرة لأغراض الشراء والمعايرة والتأجير.
- مراجعة شهادات المعدات الرئيسية، وشهادات CMC الخاصة بجهات المعايرة، وعروض الموردين، بما يتوافق مع متطلبات المعايير ذات الصلة.
- تقييم الطلبات، وإعداد عروض الأسعار والمناقصات لأعمال المعايرة والصيانة والفحص الخاص.
- إعداد تقارير المعايرة/التحقق والفحص الخاص، وإبلاغ النتائج لرئيس قسم المعايرة والعميل والمقاول والأطراف المعنية الأخرى.
- ضمان تنفيذ الاختبارات وفق طرق الاختبار القياسية وتعليمات العمل ذات الصلة ومتطلبات العملاء المتفق عليها.
- إجراء التحليلات المطلوبة بعد استلام نتائج الاختبارات من الفنيين، والتأكد من توافقها مع المعايير الوطنية والدولية.
- ضمان صلاحية جميع معدات وأجهزة المواقع والمختبرات للاستخدام، عبر توفير الموارد اللازمة لتنفيذ برامج المعايرة والصيانة.
- التحقق من حالات عدم المطابقة الحالية والمحتملة في الأنشطة، وتصميم وتنفيذ إجراءات تصحيحية ووقائية فعالة.
- مراجعة الطلبات ذات الصلة والتأكد من وضوح جميع المعلومات المطلوبة وتوافرها.
- ضمان التخزين السليم للعينات المستلمة، والحفاظ على ظروف التخزين المحددة وتسجيلها، ومتطلبات المناولة، ودرجة الحرارة والرطوبة المحيطة.
- الإشراف على عمل مشرف المختبر وفريق إدخال البيانات.
- مراجعة واعتماد الشهادات والمقترحات الفنية والتقارير الخاصة بالتنسيق مع رئيس المعايرة.
- تقديم التدريب الفني للفنيين، وتبني التقنيات الحديثة المتعلقة بالمعايرة.
- يتبع مباشرة: رئيس قسم المعايرة الفنية.
- يشرف على: مشرف مختبر المعايرة، والفنيون، وموظفو إدخال البيانات.
الشروط والمتطلبات
- يُفضّل غالباً الحصول على درجة البكالوريوس في الهندسة أو الفيزياء أو مجال علمي ذي صلة.
- خبرة من 4 إلى 6 سنوات في مجال المعايرة وهندسة الأجهزة.
المهارات المطلوبة
- تعليمات عمل المعايرة ومعايير الاختبار والمواصفات المتعلقة بالمعايرة.
- فهم أنواع أجهزة القياس المختلفة ومعايرتها وصيانتها.
- علم القياس ومبادئ النظام الدولي (SI) لضمان الدقة في القياسات.
- تحديد المصادر المحتملة لعدم اليقين في القياس.
- تشغيل معدات الاختبار واستخدامها.
- أساسيات الرياضيات والحسابات والإحصاء وتحليل البيانات.
- برامج مختلفة متعلقة بأنشطة المعايرة.
- مهارات القياس والمهارات الفنية والمختبرية الأساسية.
- السلامة المهنية.
- برامج Microsoft Word وExcel وOutlook.
المزايا
- بيئة عمل محفزة مهنياً وتحدٍّ فكري ومجزية على المستوى الشخصي.
- فرص متعددة لتطوير المهارات ومواجهة تحديات جديدة، نظراً لتنوع مشاريع الشركة الكبيرة والصغيرة في أسواق مختلفة.
- قاعدة موظفين متنوعة تضم أفراداً من خلفيات متعددة ومراحل مهنية مختلفة.
- التزام الشركة بالاستدامة ضمن عملياتها اليومية واتجاهها الاستراتيجي، وفق معيار الإدارة البيئية ISO 14001.
- بيئة عمل رقمية بالكامل وخالية من الورق.
- تدريب مستمر وبرامج توعية لتمكين الموظفين، مع فرص للمساهمة في مبادرات ومشاريع الاستدامة.
عرض النص الأصلي للإعلان
About the Arab Center of Engineering Studies (ACES):
ACES is a Leading Specialized Engineering Company in the Middle East. At ACES we offer a wide range of specialized engineering services including site and geotechnical investigation, materials technology and testing, quality control of projects, special studies, land and marine surveying, and chemical and environment testing.
With our wealth of experience, strong relationships, technical knowledge, and focus, we help our clients with fast, reliable, cost-effective, and quality engineering solutions that meet their expectations.
What ACES is Looking For?
ACES is looking for a Senior Calibration Engineer to join the team in Khobar, Saudi Arabia.
Job Summary:
Coordinate construction testing activities with technicians and clients, ensure that the site labs are ready in terms of equipment’s specifications, calibration certificate ……etc. Issue testing reports, coordinate construction testing activities with technicians and clients and ensure all testing are performed according to required specifications and lead the team under direct supervision and motivate them to maintain team efficiency.
Duties and Responsibilities:
Managerial Duties:
- Implement company policies, goals, objectives and procedures and support in their development as needed.
- Oversee the implementation of operations plan, policies, procedures and transition/ migration plans.
- Support calibration technical head in management of resources, cost control and budgeting.
- Monitor costs and resources in day-to-day activities
- Avoid any conflicts of interest that could compromise impartiality. Provide unbiased and objective assessments of equipment, ensuring all calibrations are performed to the highest standards without external influence.
- Maintain the confidentiality of all data and calibration results. This includes secure handling and storage of sensitive information.
Technical Duties:
- Respond to customers’ inquiries concerning Calibration progress and reporting.
- Prepare and initially check calibration reports prior to their submission for approval by the calibration Head.
- Analyze data and conduct corrective action to prevent non-conforming items.
- Set calibration schedules and supervise work performed by supervisor & technicians.
- Communicate with equipment suppliers/vendors and calibration agency for purchasing, calibration & rental.
- Review the master equipment certificates, calibration agencies CMC’s, suppliers’ proposals in accordance with the relevant standard requirements.
- Evaluate the requests, prepare and provide quotes and bids on calibration, maintenances and special inspection works.
- Conduct calibration/verification and special inspection reports and communicate results to calibration section head, client, contractor and other relevant parties.
- Ensure tests are carried out in accordance with relevant standard test methods/work instructions and according to agreed customers’ requirements.
- Conduct analysis as required after receiving tests results from technicians and ensure its compliance with national and international standards.
- Ensure all site/lab equipment and instruments are fit for use by provision of necessary resources for the implementation of calibration and maintenance programs.
- Investigate existing and potential non-conformities in activities, devise and implement effective corrective and preventive actions.
- Perform review of related orders and ensure all the required information is clear and available.
- Ensure proper storage of received items, maintain and record specified storage conditions, if any, handling requirement and ambient temperature/humidity.
- Supervise the work of lab supervisor and Data Entries.
- Reviewing and approving of certificates, technical proposals and special reports in coordination with the calibration Head.
- Provide technical training to technicians, and adopting new technologies related to calibration.
Reporting To:
Calibration Technical Section Head
Direct Reports:
Calibration Lab Supervisor/ Technicians/ Data entry
Job Requirements:
Education & Experience:
- Bachelor's degree in engineering physics, or a related scientific field is often preferred.
- 4-6 years of experience in the field of calibration and Instrument Engineering.
Knowledge, skills, and abilities:
- Calibration Work Instructions /Test Standards and Specifications related to calibration.
- Understanding of various measurement instrument and their calibration/maintenances.
- Metrology and SI Principles to ensure precision and accuracy in measurements
- Identify the potential sources of Measurement uncertainty.
- Operation and Use of Testing Equipment.
- Fundamentals of Mathematics, Calculations, Statistics and Data Analysis.
- Various software related to calibration activities.
- Measurement, Basic Technical and Laboratory skills.
- Occupational Safety.
- Ms. Word, excel & Outlook
Why work for ACES?
At ACES, we believe in potential. We strive to create a work environment that is professionally stimulating, intellectually challenging, and personally rewarding.
ACES is committed to recruiting and retaining qualified, motivated staff who can support our clients effectively on projects throughout the Middle East. We are involved in a wide array of projects, large and small, in various markets. Our extensive portfolio provides numerous opportunities for our staff to improve their skills and to meet new challenges.
ACES has a diverse employee base, made up of individuals with widely varying backgrounds who are at different stages of their professional careers. They share a common goal: serving our clients according to the highest standards of excellence.
Our Commitment to Sustainability
At ACES, sustainability is integrated into our daily operations and strategic direction, guided by the ISO 14001 Environmental Management Standard. We maintain a fully digitized, paperless environment to reduce our ecological footprint, while our Board and executive management have embedded environmental sustainability into our governance framework. We actively seek environmentally conscious talent and provide ongoing training and awareness programs to empower employees, along with opportunities to contribute to sustainability initiatives and projects.
رقم الإعلان لدى المصدر: 4491218993