Robaeyat Code Engineering Consulting تعلن عن وظيفة مهندس سلامة أول في الدمام
تفاصيل الوظيفة
تعلن شركة روبيات للاستشارات الهندسية (Robaeyat Code Engineering Consulting) عن حاجتها إلى مهندس سلامة أول (Senior Safety Engineer) للعمل في مدينة الدمام بالمنطقة الشرقية في المملكة العربية السعودية.
نبذة عن الوظيفة
نبحث عن مهندس سلامة لإجراء تقييمات المواقع، وتحليل فجوات الامتثال، وإعداد ومراجعة حزم التصميم التصحيحي للمنشآت الصناعية. يجب أن تكون لدى المرشح معرفة عملية بتصميم السلامة، وأن يكون قادراً على تطبيق توجيهات السلامة والحماية من الحريق في SAIS (المعروف سابقاً بـ HCIS) والمواصفات المرجعية ذات الصلة. تتطلب الوظيفة ترجمة نتائج الموقع إلى إجراءات تصحيحية ومتطلبات تصميم واضحة.
المهام والمسؤوليات
- تقييم الموقع: مراجعة المخططات الهندسية وسجلات المعدات ونتائج التدقيق السابقة وسجلات الحوادث وتقارير فحص واختبار أنظمة الحماية من الحريق قبل زيارات الموقع.
- إجراء التقييمات الميدانية مع مهندسي الحماية من الحريق والمفتشين وفريق التشغيل، وتقييم ظروف الحريق وسلامة الأرواح، بما يشمل مخارج الطوارئ، وإمكانية وصول فرق الطوارئ، وتخزين المواد الخطرة، والفصل بين مناطق الحريق، وتعطل أنظمة الحماية.
- تقييم المخاطر المرتبطة بكل منشأة، مثل حرائق الوقود والمحولات والكابلات، وأخطار تخزين المواد الكيميائية أو مناولتها عند وجودها.
- توثيق النتائج بالمراجع الخاصة بالأصول، والصور المسموح بها، والمخططات المعلَّمة، والسجلات الداعمة، مع رفع المخاطر العاجلة واقتراح الضوابط المؤقتة لمشغل الموقع.
- إعداد مصفوفة امتثال تربط توجيهات SAIS والمواصفات المرجعية ذات الصلة بالأدلة الميدانية وإجراءات التصميم.
- تحديد الانحرافات المؤكدة، والبنود التي تحتاج إلى مزيد من التحقق، وفجوات التصميم المحتملة، وتسجيل كل نتيجة مع المتطلب المطبّق والحالة الملاحظة والمخاطر والإجراء الموصى به.
- ترتيب النتائج حسب المخاطر والأثر التشغيلي، والتنسيق مع المهندس الرئيسي لتحديد ما يحتاج إلى صيانة أو دراسة إضافية أو تصميم تصحيحي.
- إعداد مدخلات هندسة السلامة لحزم التصميم التصحيحي، بما في ذلك تقييمات المخاطر ومعايير التصميم والتوصيات المتعلقة بمخارج الطوارئ وطرق الهروب وفصل الحريق وتخزين المواد الكيميائية وواجهات الاستجابة للطوارئ.
- مراجعة المخططات والمواصفات مع فرق الحماية من الحريق والميكانيكا والكهرباء والإنشاءات والعمليات، والتأكد من أن كل إجراء مقترح يعالج النتيجة الأصلية ويمكن تنفيذه بأمان في منشأة قيد التشغيل.
- دعم ورش مراجعة التصميم، والرد على تعليقات SAIS-HCIS، وإعداد المبررات الفنية للانحرافات المقترحة.
- تحديد الأدلة اللازمة للتحقق من إغلاق النتائج، بما في ذلك التفتيش وسجلات الاختبار والمخططات المحدّثة عند الحاجة.
الشروط والمتطلبات
- بكالوريوس في هندسة السلامة، أو هندسة الحماية من الحريق، أو الهندسة الميكانيكية، أو الهندسة الكيميائية، أو تخصص هندسي ذو صلة.
- شهادة NEBOSH International General Certificate in Occupational Health and Safety (IGC) أو مؤهل أعلى في الصحة والسلامة المهنية.
- تسجيل مهني لدى الهيئة السعودية للمهندسين (SCE) في فئة هندسية مناسبة.
- خبرة لا تقل عن خمس سنوات في هندسة السلامة الصناعية ذات الصلة، بما في ذلك العمل في محطات الطاقة أو المياه أو تحلية المياه أو البتروكيماويات أو منشآت صناعية مماثلة قيد التشغيل.
- خبرة مثبتة في تقييم المواقع وتحليل فجوات الامتثال ومراجعة التصميم الفني، مع القدرة على شرح كيفية تحويل نتيجة حددها المرشح إلى متطلب تصميم تصحيحي.
- مفضّل: شهادة NEBOSH HSE Certificate in Process Safety Management، أو تدريب رسمي في HAZID أو HAZOP أو طرق تقييم المخاطر الصناعية المعادلة.
- مفضّل: شهادة Certified Safety Professional (CSP).
- مفضّل: خبرة سابقة في إعداد أو مراجعة ملفات SAIS/HCIS، أو الرد على تعليقات المراجعة، أو التحقق من إغلاق نتائج السلامة والحماية من الحريق في المنشآت الصناعية.
المهارات المطلوبة
- معرفة عملية بمتطلبات SAIS/HCIS للحماية من الحريق وسلامة الأرواح.
- القدرة على قراءة المخططات الهندسية وتفسير السجلات الفنية.
- القدرة على كتابة تقارير واضحة باللغة الإنجليزية.
عرض النص الأصلي للإعلان
We are seeking a Safety Engineer to conduct site assessments, perform compliance gap analyses, and develop and review corrective design packages for industrial facilities. The candidate must have practical knowledge of safety design and be able to apply the relevant SAIS (formerly HCIS) Safety and Fire Protection directives and referenced standards. The role requires translating site findings into clear corrective actions and design requirements.
· Review existing drawings, equipment registers, previous audit findings, incident records, and fire protection inspection and test reports before site visits.
· Conduct field assessments with fire protection engineers, inspectors, and operations staff. Evaluate fire and life safety conditions, including emergency exits, access for emergency responders, hazardous material storage, fire separation, and protection system impairments.
· Assess hazards relevant to each facility, such as fuel and transformer fires, cable fires, and chemical storage or handling hazards where present.
· Document findings with asset references, permitted photographs, marked-up drawings, and supporting records. Escalate urgent hazards and recommend interim controls to the site operator.
2 Gap Analysis· Help develop a compliance matrix that links applicable SAIS directives and referenced standards to field evidence and design actions.
· Identify confirmed deficiencies, items requiring further verification, and potential design gaps. Record each finding with the applicable requirement, observed condition, risk, and recommended action.
· Prioritize findings by risk and operational impact. Coordinate with the lead engineer to determine which items require maintenance, further study, or corrective design.
3 Corrective Design and Closeout· Develop the safety engineering inputs for corrective design packages, including hazard assessments, design criteria, and recommendations for emergency access, means of egress, fire separation, chemical storage, and emergency response interfaces.
· Review drawings and specifications with the fire protection, mechanical, electrical, civil, and process teams. Check that each proposed measure addresses the original finding and can be implemented safely in an operating facility.
· Support design review workshops, responses to SAIS-HCIS comments, and technical justifications for proposed deviations. Define the evidence needed to verify closure, including inspections, test records, and updated drawings where applicable.
Required Qualifications and Certifications· Bachelor’s degree in Safety Engineering, Fire Protection Engineering, Mechanical Engineering, Chemical Engineering, or a related engineering discipline.
· NEBOSH International General Certificate in Occupational Health and Safety (IGC), or a higher occupational health and safety qualification.
· Saudi Council of Engineers (SCE) professional registration in an appropriate engineering category.
· At least five years of relevant industrial safety engineering experience, including work in operating power, water, desalination, petrochemical, or comparable industrial facilities.
· Demonstrated experience in site assessment, compliance gap analysis, and technical design review. Candidates should be able to explain how a finding they identified was translated into a corrective design requirement.
· Working knowledge of SAIS/HCIS fire and life safety requirements and the ability to read engineering drawings, interpret technical records, and write clear reports in English.
Preferred Qualifications and Experience· NEBOSH HSE Certificate in Process Safety Management, or formal training in HAZID, HAZOP, or equivalent industrial risk assessment methods.
· Certified Safety Professional (CSP).
- · Previous experience preparing or reviewing SAIS/HCIS submissions, responding to review comments, or verifying closure of industrial fire and life safety findings.
رقم الإعلان لدى المصدر: 4489718547