تفاصيل الوظيفة
تعلن شركة NOV عن حاجتها إلى فني كهرباء أول (Senior Electrical Technician) في السعودية.
نبذة عن الوظيفة
سيقوم فني الكهرباء الأول بتجميع وتوصيل وفحص واختبار وتشخيص وإصلاح الأنظمة والمكونات الكهربائية المستخدمة في خطوط منتجات NOV ISE. كما سيقرأ المخططات الكهربائية ومخططات التوصيل والرسومات الهندسية وتعليمات العمل وقوائم المواد لإنجاز العمل بأمان ودقة ووفق معايير الجودة المطلوبة. سيقدم الدعم الفني لفريق الإنتاج، ويدرب الفنيين الأقل خبرة، ويحدد المشكلات الكهربائية والإجرائية ويحلها، ويساهم في التحسين المستمر. وتتمثل مسؤولية الوظيفة في تسليم المنتجات مطابقة للمواصفات من المرة الأولى بما يتوافق مع جداول الإنتاج، مع الحفاظ على أداء قوي في الصحة والسلامة والبيئة (HSE) والجودة والتكلفة والتسليم والنظافة.
المهام والمسؤوليات
- تشغيل معدات التجميع والاختبار الكهربائية بأمان وكفاءة، والالتزام بجميع متطلبات الصحة والسلامة والسلامة الكهربائية والنظافة و5S.
- استخدام صلاحية إيقاف العمل عند ملاحظة ظرف غير آمن أو خطر على الجودة أو منتج غير مطابق، ورفع الأمر فوراً.
- تنفيذ أعمال التجميع والتوصيل والتطريف والتركيب والفحص والاختبار والتشخيص والإصلاح الكهربائي وفق الرسومات والمواصفات والإجراءات وتعليمات العمل المعتمدة.
- قراءة المخططات الكهربائية ومخططات التوصيل والمخططات أحادية الخط والرسومات الهندسية وقوائم المواد وبطاقات المسار والمواصفات الفنية وتفسيرها.
- تركيب وتطريف الكابلات والموصلات وصناديق التوصيل ولوحات التحكم والمحركات والحساسات والمفاتيح والمكونات الكهربائية المرتبطة بها باستخدام الطرق والأدوات المعتمدة.
- استخدام أجهزة الاختبار والقياس الكهربائية المعايرة بشكل صحيح، بما في ذلك أجهزة القياس المتعدد وأجهزة قياس مقاومة العزل وأجهزة فحص الاستمرارية.
- التحقق من الأعمال المنجزة عبر الفحص البصري وفحص الاستمرارية والاختبار الوظيفي ومعايير القبول المحددة الأخرى قبل تسليم المنتج للعملية التالية.
- تحديد الأعطال الكهربائية والمشكلات الفنية، وإجراء التشخيص المنظم وتحليل السبب الجذري، وتنفيذ الإجراءات التصحيحية المعتمدة.
- الإبلاغ فوراً عن العيوب وتناقضات الرسومات والمواد التالفة والمكونات الخاطئة وانحرافات العمليات إلى رئيس القسم وفريق الجودة.
- دعم تحقيقات تقارير عدم المطابقة (NCR) بتقديم حقائق دقيقة والحفاظ على الأدلة والمساعدة في تحليل السبب الجذري وإكمال الإجراءات التصحيحية المسندة.
- الحفاظ على التتبع الكامل من خلال إكمال بطاقات المسار وسجلات الفحص وتقارير الاختبار وسجلات المواد ووثائق الإنتاج الأخرى بدقة وفي الوقت المحدد.
- التأكد من توفر المراجعة الصحيحة للرسومات والإجراءات وتعليمات العمل قبل بدء العمل.
- متابعة توفر المواد وحالتها، والتحكم في المكونات والأدوات الصادرة، والإبلاغ عن النقص أو التناقضات قبل أن تؤثر على جدول الإنتاج.
- الحفاظ على الجودة والكمية المطلوبتين للإنتاج، ودعم التسليم في الوقت المحدد وتحقيق جدول الإنجاز وتكلفة الجودة والإنتاجية ومستهدفات المشاركة.
- الإبلاغ عن أوقات المسار غير الدقيقة وتقديرات الإنتاج غير الواقعية والتأخيرات المتكررة وقيود الطاقة الإنتاجية، ودعم تنفيذ التغييرات المعتمدة.
- حضور الإحاطات اليومية للفريق واجتماعات الصندوق الحواري (toolbox talks) واجتماعات الإنتاج، والتواصل بوضوح بشأن الحالة والمخاطر والقيود واحتياجات الدعم.
- إعداد وتنفيذ أفكار التحسين المعتمدة التي تعزز السلامة والجودة والتدفق والإنتاجية والبيئة المريحة للعمل (Ergonomics) والأداء المالي.
- تطبيق أساليب حل المشكلات العملية، بما في ذلك تحليل 5-Why ومخطط عظم السمكة (fishbone)، على المشكلات الإنتاجية والجودة المتكررة.
- دعم إدخال منتجات وعمليات وأدوات ومعدات اختبار وآلات جديدة، بما في ذلك التجارب وأنشطة التحقق حسب ما يُسند إليه.
- تقديم التوجيه الفني والتدريب والتدريب على المهارات المرتبطة بالعمل للفنيين، والتحقق من فهمهم لطرق العمل المعتمدة.
- مساعدة رئيس القسم في تخطيط العمل اليومي وترتيب الأولويات وتوزيع المهام واستعادة التأخيرات الإنتاجية عند الحاجة.
- صيانة الأدوات ومعدات الاختبار والآلات ومناطق العمل بحالة آمنة وصالحة للاستخدام ومنظمة وجاهزة للتدقيق.
- التأكد من استخدام الأدوات ومعدات الاختبار الصالحة للعمل والمعايرة فقط، وعزل المعدات المعيبة أو منتهية المعايرة والإبلاغ عنها.
- الالتزام بمتطلبات المناطق الخطرة ومعايير IECEx المعمول بها عند العمل على المنتجات أو المعدات ذات الصلة.
- اتباع إجراءات العزل وقفل/وسم الطاقة (Lockout/Tagout) وممارسات العمل الكهربائي الآمن المعتمدة قبل الفحص أو الاختبار أو الضبط أو الإصلاح.
- العمل بتعاون مع الإنتاج والهندسة والجودة والصحة والسلامة والبيئة والتخطيط وسلسلة الإمداد لحل المشكلات وتلبية التزامات العملاء.
- دعم تغطية الإنتاج، بما في ذلك العمل الإضافي المعقول وتغيير الورديات أو إعادة التكليف المؤقت، وفقاً لمتطلبات العمل وسياسات الشركة.
- إظهار السلوك المهني، وحماية أصول NOV والمعلومات السرية، والالتزام بجميع سياسات الشركة وإجراءاتها.
- السفر عند الحاجة، وأداء المهام المعقولة الأخرى التي يكلفه بها المدير المباشر.
الشروط والمتطلبات
- مؤهل معترف به في التدريب المهني الكهربائي (Apprenticeship) أو دبلوم فني أو HNC أو مؤهل معادل في الهندسة الكهربائية أو تخصص ذي صلة.
- خبرة لا تقل عن 5 سنوات في تجميع الأنظمة الكهربائية أو تركيبها أو صيانتها أو التصنيع ذي الصلة.
- دبلوم عالٍ أو درجة جامعية في الهندسة الكهربائية أو تخصص ذي صلة.
- كفاءة أو شهادة IECEx ساربة المفعول أو ما يعادلها في المناطق الخطرة ذات الصلة بنطاق العمل.
عرض النص الأصلي للإعلان
As a Senior Electrical Technician, you will assemble, wire, inspect, test, troubleshoot, and repair electrical systems and components used across NOV ISE product lines. You will read and interpret electrical schematics, wiring diagrams, engineering drawings, work instructions, and bills of material to complete work safely, accurately, and to the required quality standard.
You will provide technical support to the production team, coach less-experienced technicians, identify and resolve electrical and process issues, and contribute to continuous improvement. The role is accountable for delivering right-first-time products in line with production schedules while maintaining strong HSE, quality, cost, delivery, and housekeeping performance.
Responsibilities
- Operate electrical assembly and test equipment safely and competently, complying with all HSE, electrical-safety, housekeeping, and 5S requirements.
- Exercise stop-work authority when an unsafe condition, quality risk, or non-conforming product is identified, and escalate the concern promptly.
- Complete electrical assembly, wiring, termination, installation, inspection, testing, troubleshooting, and repair activities in accordance with approved drawings, specifications, procedures, and work instructions.
- Read and interpret electrical schematics, wiring diagrams, single-line diagrams, engineering drawings, bills of material, route cards, and technical specifications.
- Install and terminate cables, connectors, junction boxes, control panels, motors, sensors, switches, and associated electrical components using approved methods and tooling.
- Use calibrated electrical test instruments and measuring equipment correctly, including multimeters, insulation-resistance testers, and continuity test equipment.
- Verify completed work through visual inspection, continuity checks, functional testing, and other specified acceptance criteria before releasing the product to the next operation.
- Identify electrical faults and technical issues, perform structured troubleshooting and root-cause analysis, and implement approved corrective actions.
- Immediately report defects, drawing discrepancies, damaged materials, incorrect components, or process deviations to the Section Leader and Quality team.
- Support NCR investigations by providing accurate facts, preserving evidence, assisting with root-cause analysis, and completing assigned corrective actions.
- Maintain full traceability by completing route cards, inspection records, test reports, material records, and other production documentation accurately and on time.
- Confirm that the correct revision of drawings, procedures, and work instructions is available before starting work.
- Monitor material availability and condition, control issued components and tools, and report shortages or discrepancies before they affect the production schedule.
- Maintain the required quality and quantity of production and support on-time delivery, schedule attainment, cost-of-quality, productivity, and engagement targets.
- Report inaccurate route times, unrealistic production estimates, recurring delays, and capacity constraints, and support implementation of approved changes.
- Attend daily team briefings, toolbox talks, and production meetings; communicate status, risks, constraints, and support requirements clearly.
- Generate and implement approved improvement ideas that enhance safety, quality, flow, productivity, ergonomics, and cost performance.
- Apply practical problem-solving methods, including 5-Why and fishbone analysis, to recurring production and quality issues.
- Support introduction of new products, processes, tools, test equipment, and machinery, including trials and validation activities as assigned.
- Provide task guidance, coaching, and job-related skills training to technicians and verify understanding of approved working methods.
- Assist the Section Leader in planning daily work, sequencing priorities, allocating tasks, and recovering production delays when required.
- Maintain tools, test equipment, machines, and work areas in a safe, serviceable, organized, and audit-ready condition.
- Ensure only serviceable and in-calibration tools and test equipment are used; quarantine and report defective or expired equipment.
- Comply with applicable hazardous-area and IECEx requirements when working on relevant products or equipment.
- Follow approved isolation, lockout/tagout, and electrical safe-working practices before inspection, testing, adjustment, or repair.
- Work collaboratively with Production, Engineering, Quality, HSE, Planning, and Supply Chain to resolve issues and meet customer commitments.
- Support production coverage, including reasonable overtime, shift changes, or temporary reassignment, in line with business requirements and company policy.
- Demonstrate professional conduct, protect NOV assets and confidential information, and comply with all company policies and procedures.
- Travel when required and perform other reasonable duties assigned by the line manager.
- Recognized electrical apprenticeship, technical diploma, HNC, or equivalent qualification in Electrical Engineering or a related discipline.
- Higher diploma or degree in Electrical Engineering or a related discipline.
About Us
Every day, the oil and gas industry’s best minds put more than 150 years of experience to work to help our customers achieve lasting success.
We Power the Industry that Powers the World
Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future.
Global Family
We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.
Purposeful Innovation
Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.
Service Above All
This drives us to anticipate our customers’ needs and work with them to deliver the finest products and services on time and on budget.
رقم الإعلان لدى المصدر: 4491110494
NOV تعلن عن وظيفة مفتش مراقبة جودة في رأس الخير
NOV تعلن عن وظيفة محلل سلسلة إمداد أول في رأس الخير