تفاصيل الوظيفة
تعلن شركة CSI Global عن وظيفة فني ميكانيكا (Mechanical Technician) بدوام كامل في مدينة الرياض.
نبذة عن الوظيفة
يتولى فني الميكانيكا مسؤولية تركيب أنظمة التكييف والتهوية والأنظمة الميكانيكية في المنشآت التجارية والصناعية ومشاريع البنية التحتية، وفحصها وصيانتها الوقائية، واستكشاف أعطالها واختبارها وإصلاحها. ويركز الدور على صيانة وحدات معالجة الهواء (AHUs) ووحدات ملفات المراوح (FCUs) ومراوح التهوية والمحركات والمعدات الميكانيكية المرتبطة بها، لضمان تشغيلها بأمان وموثوقية وكفاءة، وفقاً لإجراءات الشركة ومتطلبات العميل والمعايير المعمول بها.
المهام والمسؤوليات
- تنفيذ الصيانة الوقائية والتصحيحية وصيانة الأعطال الطارئة لأنظمة التكييف والمعدات الميكانيكية.
- فحص وحدات AHUs وFCUs ومراوح العادم ومراوح التهوية، بما في ذلك السيور والفلاتر والمحركات والمحامل والمكونات الأخرى، واستبدال الأجزاء التالفة أو المعطلة عند الحاجة.
- استكشاف أعطال الأنظمة الميكانيكية والتكييف وأنظمة التحكم الأساسية، وتنفيذ الإجراءات التصحيحية والتعديلات اللازمة أثناء الإصلاح.
- صيانة أنظمة المياه المبردة وأنظمة التهوية ووحدات AHUs وFCUs ومراوح العادم والمكونات المرتبطة بها.
- إجراء فحوصات الاهتزاز واختبارات المحاذاة على وحدات AHUs وFCUs والمراوح والمعدات الدوارة، والمساعدة في موازنة المراوح عند الحاجة.
- دعم تشغيل المعدات والفحوصات التشغيلية والوظيفية لوحدات AHUs وFCUs والمراوح.
- إجراء اختبارات أداء المعدات وأخذ القراءات الكهربائية، بما في ذلك الفولت والأمبير، عند الحاجة وضمن نطاق الصلاحية الممنوحة.
- تشخيص الأعطال الميكانيكية وتنفيذ إجراءات تصحيحية فعالة لتقليل توقف المعدات.
- إجراء محاذاة المعدات والتزييت واستبدال المحامل والأختام والوصلات والسيور والفلاتر والمكونات الميكانيكية الأخرى.
- فحص وصيانة المضخات والمحركات والضواغط وأنظمة الأنابيب والصمامات والمعدات الميكانيكية الأخرى.
- صيانة أنظمة السباكة وشبكات المياه وأنظمة الصرف والصمامات والتجهيزات حسب ما يُكلَّف به.
- المساعدة في فحص وصيانة أنظمة مكافحة الحريق الميكانيكية، بما فيها مضخات الحريق وأنابيب الرشاشات وبكرات الخراطيم والمعدات المرتبطة بها.
- قراءة المخططات الميكانيكية ودليل المعدات والوثائق الفنية ومخططات P&ID وتفسيرها.
- تسجيل نتائج الفحص وأنشطة الصيانة ونتائج اختبارات الأداء والقراءات التشغيلية والمشكلات، والإبلاغ بوضوح عن الأعطال والإجراءات التصحيحية.
- إكمال أوامر العمل وقوائم الفحص الصيانية وتقارير الخدمة بدقة باستخدام نظام إدارة الصيانة المعتمد.
- دعم أنشطة التشغيل التجريبي والاختبار والتشغيل للتركيبات الميكانيكية الجديدة والمعدات البديلة.
- الالتزام بأنظمة السلامة وتصاريح العمل وإجراءات العزل والقفل والوسم (LOTO) وإجراءات الصحة والسلامة والبيئة (HSE) في الشركة.
- التنسيق مع المشرفين والمهندسين والفنيين من التخصصات الأخرى لإنجاز أعمال الصيانة بكفاءة.
- المحافظة على الأدوات والمعدات ومواقع العمل بحالة نظيفة ومرتبة وآمنة.
- الاستجابة بسرعة لطلبات الصيانة الطارئة والتعامل مع الأعطال عند الحاجة.
الشروط والمتطلبات
- دبلوم أو شهادة ITI في الهندسة الميكانيكية أو التكييف أو الصيانة الصناعية أو تخصص تقني ذي صلة.
- خبرة من 3 إلى 5 سنوات في صيانة التكييف والأنظمة الميكانيكية ضمن إدارة المرافق أو أعمال MEP أو المصانع الصناعية أو المباني التجارية أو مشاريع البنية التحتية.
- يُفضّل وجود خبرة في دول مجلس التعاون الخليجي أو المملكة العربية السعودية.
- مطلوب: تسجيل ساري في الهيئة السعودية للمهندسين (SCE) أو شهادة فني بالتصنيف المناسب، وذلك وفقاً لمتطلبات الهيئة المعمول بها.
- مفضّل: شهادة فني تكييف (HVAC Technician).
- مفضّل: تسجيل أو تصنيف فني ذو صلة لدى الهيئة السعودية للمهندسين.
- مفضّل: شهادة في السلامة المهنية أو الصحة والسلامة والبيئة (HSE).
- ميزة إضافية: تدريب في تحليل الاهتزاز أو محاذاة المعدات أو صيانة المعدات الدوارة.
- ميزة إضافية: رخصة قيادة سعودية سارية.
المهارات المطلوبة
- معرفة عملية بأنظمة التكييف، بما فيها AHUs وFCUs ومراوح العادم وأنظمة التهوية.
- خبرة عملية في فحص وصيانة السيور والفلاتر والمحركات والمحامل ومكونات التكييف الأخرى.
- القدرة على استكشاف الأعطال الميكانيكية ومشكلات التكييف ومشكلات أنظمة التحكم الأساسية.
- معرفة بفحوصات الاهتزاز ومحاذاة المعدات وإجراءات موازنة المراوح الأساسية.
- القدرة على دعم تشغيل المعدات والفحوصات الوظيفية واختبارات الأداء.
- القدرة على قياس قراءات الفولت والأمبير وتفسيرها باستخدام الأجهزة المناسبة وضمن نطاق الصلاحية.
- خبرة في المضخات والضواغط وأنظمة الأنابيب والصمامات والمعدات الدوارة.
- فهم أساسي لأنظمة السباكة وأنظمة مكافحة الحريق الميكانيكية.
- القدرة على تفسير المخططات الهندسية ودليل المعدات ووثائق الصيانة.
- الإلمام ببرامج الصيانة الوقائية وأوامر العمل ونظام CMMS يُعد ميزة.
- مهارات قوية في تشخيص الأعطال والإصلاح والفحص والتقارير الفنية.
- مهارات تواصل جيدة والعمل ضمن فريق.
- قدرة قوية على حل المشكلات واستكشاف الأعطال.
- مهارات واضحة في التوثيق وإعداد التقارير.
- القدرة على العمل تحت الضغط والالتزام بمواعيد الصيانة.
- وعي عالٍ بالسلامة واهتمام بالتفاصيل.
- القدرة على التنسيق الفعال مع المشرفين والمهندسين وفرق الصيانة الأخرى.
- الاستعداد للعمل بنظام الورديات والاستجابة لطلبات الطوارئ أو العمل في مواقع المشاريع عند الحاجة.
عرض النص الأصلي للإعلان
Location: Riyadh
Employment Type: Full Time
Position Summary
The Mechanical Technician is responsible for the installation, inspection, preventive maintenance, troubleshooting, testing, and repair of HVAC and mechanical systems across commercial, industrial, and infrastructure facilities. The role focuses on maintaining Air Handling Units (AHUs), Fan Coil Units (FCUs), ventilation fans, motors, and associated mechanical equipment to ensure safe, reliable, and efficient operation in compliance with company procedures, client requirements, and applicable standards.
Key Responsibilities
- Perform preventive, corrective, and breakdown maintenance on HVAC systems and mechanical equipment.
- Inspect AHUs, FCUs, exhaust fans, and ventilation fans, including belts, filters, motors, bearings, and other components; replace worn or faulty parts as required.
- Troubleshoot mechanical, HVAC, and basic control system faults, and perform corrective actions and adjustments during rectification.
- Maintain chilled water systems, ventilation systems, AHUs, FCUs, exhaust fans, and associated components.
- Perform vibration checks and alignment tests on AHUs, FCUs, fans, and rotating equipment; assist with fan balancing when required.
- Support equipment startup, operational inspections, and functional checks for AHUs, FCUs, and fans.
- Conduct equipment performance tests and take electrical readings, including voltage and current (volts and amps), where required and within the scope of authorization.
- Diagnose mechanical faults and implement effective corrective actions to minimize equipment downtime.
- Perform equipment alignment, lubrication, and replacement of bearings, seals, couplings, belts, filters, and other mechanical components.
- Inspect and maintain pumps, motors, compressors, piping systems, valves, and other mechanical equipment.
- Maintain plumbing systems, water supply networks, drainage systems, valves, and fixtures as assigned.
- Assist with the inspection and maintenance of firefighting mechanical systems, including fire pumps, sprinkler piping, hose reels, and related equipment.
- Read and interpret mechanical drawings, equipment manuals, technical documentation, and P&IDs.
- Record inspection findings, maintenance activities, performance test results, equipment readings, and operational issues; report faults and corrective actions clearly.
- Complete work orders, maintenance checklists, and service reports accurately using the applicable maintenance management system.
- Support commissioning, testing, and startup activities for new mechanical installations and replacement equipment.
- Follow safety regulations, permit-to-work requirements, lockout/tagout (LOTO), and company HSE procedures.
- Coordinate with supervisors, engineers, and other trades to complete maintenance activities efficiently.
- Maintain tools, equipment, and work areas in a clean, organized, and safe condition.
- Respond promptly to emergency maintenance requests and attend breakdowns as required.
- Diploma or ITI in Mechanical Engineering, HVAC, Industrial Maintenance, or a related technical discipline.
- 3-5 years of experience in HVAC and mechanical maintenance within facilities management, MEP, industrial plants, commercial buildings, or infrastructure projects.
- GCC or Saudi Arabia experience is preferred.
- Valid Saudi Council of Engineers (SCE) registration or technician certificate under the appropriate classification is required, subject to applicable SCE requirements.
- Practical knowledge of HVAC systems, including AHUs, FCUs, exhaust fans, and ventilation systems.
- Hands-on experience inspecting and maintaining belts, filters, motors, bearings, and other HVAC components.
- Ability to troubleshoot mechanical faults, HVAC issues, and basic control system problems.
- Knowledge of vibration checks, equipment alignment, and basic fan-balancing procedures.
- Ability to support equipment startup, functional checks, and performance testing.
- Ability to measure and interpret voltage and current readings using appropriate instruments, within the scope of authorization.
- Experience with pumps, compressors, piping systems, valves, and rotating equipment.
- Basic understanding of plumbing and firefighting mechanical systems.
- Ability to interpret engineering drawings, equipment manuals, and maintenance documentation.
- Familiarity with preventive maintenance programs, work orders, and CMMS is an advantage.
- Strong fault-finding, rectification, inspection, and technical reporting skills.
- Good communication and teamwork skills.
- Strong problem-solving and troubleshooting abilities.
- Clear documentation and reporting skills.
- Ability to work under pressure and meet maintenance deadlines.
- High level of safety awareness and attention to detail.
- Ability to coordinate effectively with supervisors, engineers, and other maintenance teams.
- Willingness to work shifts, attend emergency call-outs, or work at project sites when required.
- HVAC Technician certification.
- Relevant Saudi Council of Engineers (SCE) registration or technician classification.
- Occupational safety or HSE certification.
- Training in vibration analysis, equipment alignment, or rotating equipment maintenance is an advantage.
- Valid Saudi driving license is an advantage.
رقم الإعلان لدى المصدر: 4490406667