وظيفة الأمن السيبراني وتقنية المعلومات شاغرة لدى أكوا باور
تفاصيل الوظيفة
تعلن أكوا باور، المطوّر والمستثمر والمشغّل لمحطات توليد الكهرباء وتحلية المياه بإجمالي 90 أصلاً قيد التشغيل أو الإنشاء أو التطوير المتقدم في 13 دولة، عن وظيفة الأمن السيبراني / تقنية المعلومات في المملكة العربية السعودية. وتؤكد الشركة التزامها ببناء ثقافة متنوعة ومفعمة بالحيوية بقدر تنوع الأسواق التي تخدمها.
المهام والمسؤوليات
- ترجمة متطلبات الأمن السيبراني ومواصفاتها الفنية الصادرة عن مكتب CISO إلى متطلبات أمن IT/OT خاصة بكل مشروع، لتضمينها في حزم المناقصات ونطاقات أعمال EPC والموردين، مع اعتماد ضوابط NCA كحد أساسي إضافة إلى المتطلبات الخاصة بالدولة متى انطبقت.
- مراجعة مخرجات التصميم من مقاولي EPC وشركات OEM، بما في ذلك بنية الشبكات والمناطق والقنوات (zones and conduits) والـ DMZ والوصول البعيد الآمن وفلسفات التقوية والنسخ الاحتياطي، مقارنةً بمتطلبات ACWA وNCA، وإصدار الملاحظات الفنية ومتابعتها حتى الإغلاق.
- التحقق من تضمين مواصفات حماية البيانات والتقنية (التجزئة، الوصول البعيد الآمن، التقوية، الحماية من البرمجيات الخبيثة، التحديثات، التسجيل، التشفير وإدارة المفاتيح) في الجداول الفنية لعقود الشراء والإنشاء.
- دعم التنسيق مع فريق التحول الرقمي (Digital) لضمان التكامل الآمن للأنظمة الرقمية وأنظمة تقنية المعلومات مع البنية التحتية للمحطات.
- حضور واختبار إجراءات الأمن السيبراني في مرحلتي FAT وSAT والتشغيل التجريبي (Commissioning)، وتشمل خطوط الأساس للتقوية، وإدارة الحسابات، وإزالة بيانات الاعتماد الافتراضية، والوصول البعيد الآمن، والحماية من البرمجيات الخبيثة، ومستويات التحديثات، والتسجيل، ومزامنة الوقت.
- فحص أنظمة IT/OT المركبة ومقارنتها بالتصاميم والمواصفات المعتمدة، وتسجيل حالات عدم المطابقة في قائمة الملاحظات (punch list) ومتابعتها مع المقاولين حتى الإغلاق.
- التحقق من بناء ضوابط الأمن المادي لأصول الأمن السيبراني (غرف الخوادم، غرف التحكم، خزائن الشبكات) وفق مواصفات ACWA.
- التأكد من إغلاق بنود قائمة ملاحظات الأمن السيبراني أو تسجيلها رسمياً كفجوات قبل كل مرحلة من مراحل المشروع وبوابات المراجعة (stage gates).
- التحقق من التزام مقاولي EPC والموردين وشركات OEM بمتطلبات الأمن السيبراني التعاقدية طوال دورة حياة المشروع، من خلال مراجعة خطط الأمن وأدلة التقوية وتقارير التحديثات والثغرات وترتيبات الوصول البعيد.
- إجراء فحوصات دورية للامتثال في المواقع، مثل الاتصالات غير المصرح بها ووسائط التخزين القابلة للإزالة والوصول البعيد المؤقت والأجهزة الشخصية على شبكات المشروع، ورفع النتائج إلى مدير الأمن السيبراني في مكتب إدارة المشروع (PMO).
- تسجيل حالات عدم المطابقة لدى المقاولين، والاتفاق على الإجراءات التصحيحية مع الجهات المسؤولة، وتصعيد البنود المتأخرة عبر مدير الأمن السيبراني في PMO.
- تقديم أو تنسيق برامج التوعية بالأمن السيبراني المناسبة لموظفي الموقع والمقاولين الذين يصلون إلى أنظمة IT/OT الخاصة بالمشروع.
- إجراء تقييمات الثغرات لأنظمة IT/OT المركبة قبل التسليم، وتحديد نطاق اختبارات الاختراق وتنسيقها ضمن الترتيبات التي يشرف عليها مكتب CISO، باستخدام أساليب آمنة لبيئات OT متفق عليها مع الموردين وهندسة المحطات.
- التحقق من نتائج الاختبارات مع المقاولين ومن معالجتها، وتسجيل الفجوات المتبقية لكي يرفعها مدير الأمن السيبراني في PMO إلى مكتب CISO ومالك الأصل قبل التشغيل التجريبي.
- التحقق من تصميم وتنفيذ واختبار ترتيبات النسخ الاحتياطي والاستعادة، بما يشمل اختبارات الاسترجاع، قبل تسليم المحطة.
- التحقق من تصميم متطلبات المرونة (التكرار الاحتياطي، والتحويل التلقائي عند الأعطال، والاستعادة) وبنائها ضمن أنظمة المحطة، مع حضور اختبارات التحويل التلقائي متى كان ذلك ممكناً.
- تحديد المخاطر السيبرانية المكتشفة أثناء تنفيذ المشروع وتقييمها باستخدام منهجية المخاطر المعتمدة، ورفعها إلى مكتب CISO عبر مدير الأمن السيبراني في PMO.
- الاحتفاظ بسجلات المخاطر والفجوات للمشاريع المكلَّف بها في سجل المخاطر السيبرانية، مع الأدلة الداعمة وحالة المعالجة.
- تقييم الانحرافات الفنية وطلبات الاستثناء من المقاولين، وتوثيق أثرها على المخاطر والضوابط التعويضية، بما يدعم قرارات مالك الأصل بشأن المعالجة والقبول.
- تسليم المخاطر والفجوات المفتوحة وحالة معالجتها إلى مالك الأصل وفريق ACWA OPS للأمن السيبراني عند تسليم المشروع.
- إعداد سجل أصول IT/OT لجميع الأنظمة المركبة (الأجهزة، وإصدارات البرامج الثابتة والبرمجيات، وعناوين الشبكة، ومستوى الأهمية)، ونقله إلى مالك الأصل عند التسليم.
- التحقق من ضوابط الوصول خلال مرحلة المشروع على أنظمة IT/OT، بما في ذلك الحسابات المسماة والحسابات ذات الصلاحيات المتقدمة ووصول الموردين وتغيير كلمات المرور الافتراضية، والتأكد من حذف الحسابات المؤقتة للمقاولين قبل التسليم.
- رصد التهديدات والأنشطة المشبوهة على أنظمة IT/OT للمشروع وتوثيقها، وتنسيقها مع الإدارات المعنية.
- دعم التعامل مع الحوادث السيبرانية ضمن نطاق المشروع مع الحفاظ على الأدلة واتباع مسار التصعيد.
- تقييم الأثر السيبراني للتغييرات في التصميم والإعدادات المرفوعة عبر إدارة التغيير في المشروع.
- مراجعة معلومات التهديدات الصادرة عن مكتب CISO والتنبيهات الأمنية من الموردين المتعلقة بالأنظمة المركبة، والتأكد من تطبيق المقاولين للتحديثات المعتمدة أو الضوابط التعويضية قبل التسليم.
- الحفاظ على مستودع أدلة الأمن السيبراني للمشاريع المكلَّف بها لدعم تقارير المراحل ومراجعات الامتثال ومراجعات ضمان المشروع (Project Assurance Reviews) وعمليات التدقيق الداخلي.
- إعداد التقارير الفنية لحالة المشروع وجداول متابعة الفجوات والمدخلات للوحات المؤشرات (dashboards) لمدير الأمن السيبراني في PMO.
- تنفيذ الإجراءات التصحيحية المتفق عليها الناتجة عن نتائج ضمان الجودة والتدقيق ضمن النطاق المحدد.
- توثيق الدروس المستفادة من تنفيذ المشروع، واقتراح تحسينات على مواصفات ACWA للأمن السيبراني وقوائم الفحص وإجراءات الاختبار.
- تجميع حزمة تسليم الأمن السيبراني (سجل الأصول، وبنية الشبكة، وخطوط الأساس للإعدادات، وتقارير الاختبار، وإجراءات النسخ الاحتياطي والاستعادة، والمخاطر المفتوحة) لشركة المشروع وفريق ACWA OPS للأمن السيبراني.
- تقديم المدخلات الفنية (قوائم الأصول، ومصادر السجلات، ومخططات الشبكة) لتمكين مدير الأمن السيبراني في PMO من التأكد من توفر خدمات الأمن السيبراني واتفاقيات مستوى الخدمة مثل مراقبة مركز العمليات الأمنية (SOC) قبل التسليم والتشغيل التجريبي.
عرض النص الأصلي للإعلان
We are a developer, investor, and operator of power generation and desalinated water plants, with 90 assets in operation, construction, or advanced development across 13 countries.
KEY ACCOUNTABILITIES:
1- IT/OT Security Requirements & Design Review
- Translate CISO Office cybersecurity requirements and technical specifications into project-specific IT/OT security requirements for tender packages and EPC/vendor scopes, applying NCA controls as the baseline plus applicable country-specific requirements.
- Review EPC and OEM design deliverables, including network architecture, zones and conduits, DMZ, secure remote access, hardening and backup philosophies, against ACWA requirements and NCA, issuing technical comments and tracking them to closure.
- Verify that data and technology protection specifications (segmentation, secure remote access, hardening, malware protection, patching, logging, cryptography and key management) are included in procurement and construction contract technical schedules.
- Support coordination with Digital on the secure integration of digital and IT systems plants infrastructure.
2- Implementation Verification at FAT, SAT & Commissioning
- Witness and verify cybersecurity tests at FAT, SAT and commissioning, covering hardening baselines, account management, removal of default credentials, secure remote access, malware protection, patch levels, logging and time synchronisation.
- Inspect installed IT/OT systems against approved designs and specifications, logging non-conformities in the project punch list and following them up with contractors to closure.
- Verify that physical security controls for cybersecurity assets (server rooms, control rooms, network cabinets) are built to ACWA specifications.
- Confirm cybersecurity punch-list items are closed, or formally recorded as gaps, before each project milestone and stage gate.
3- Contractor, Vendor & Third-Party Compliance
- Verify EPC contractor, OEM and vendor compliance with contractual cybersecurity requirements throughout project life cycle, reviewing their security plans, hardening guides, patch and vulnerability reports, and remote access arrangements.
- Perform periodic compliance checks on sites (e.g., unauthorised connections, removable media, temporary remote access, personal devices on project networks) and report findings to the PMO cybersecurity Manager.
- Record contractor non-conformities, agree corrective actions with the responsible parties and escalate overdue items through the PMO cybersecurity Manager.
- Deliver or coordinate applicable cybersecurity awareness for project site personnel and contractors who access project IT/OT systems.
4- Pre-Handover Testing, Backup & Resilience Verification
- Perform pre-handover vulnerability assessments on installed IT/OT systems, and scope and coordinate penetration testing through CISO Office-governed arrangements, using OT-safe methods agreed with OEMs and plant engineering.
- Validate testing findings with contractors, verify remediation, and record residual gaps for the PMO Cybersecurity Manager to report to the CISO Office and Asset Owner before commissioning.
- Verify that backup and recovery provisions are designed, implemented and tested, including restoration tests, before plant handover.
- Verify that resilience requirements (redundancy, failover, recovery) are designed and built into plant systems, witnessing failover tests where applicable.
5- Project Cybersecurity Risk & Gap Management
- Identify and assess cybersecurity risks discovered during project execution using the approved cybersecurity risk methodology and escalate them to the CISO Office through the PMO cybersecurity Manager.
- Maintain risk and gap entries for assigned projects in the cybersecurity risk register, with supporting evidence and treatment status.
- Assess technical deviations and exception requests from contractors, documenting risk impact and compensating controls to inform the Asset Owner's treatment and acceptance decisions.
- Hand over open risks, gaps and treatment status to the Asset Owner and Cybersecurity ACWA OPS at project handover.
6- IT/OT Asset Register, Access Control & Handover Readiness
- Build and maintain the asset register for all IT/OT systems installed (hardware, firmware and software versions, network addresses, criticality) and transfer it to the Asset Owner at handover.
- Verify project-phase access controls on IT/OT systems, including named and privileged accounts, vendor access and changed default passwords, and confirm temporary contractor accounts are removed before handover.
7- Threat, Incident & Change Support during Construction
- Report, document and coordinate cybersecurity threats and suspicious activity observed on project IT/OT systems with the relevant departments.
- Support cybersecurity incident handling within the scope, preserving evidence and following the escalation path.
- Assess the cybersecurity impact of design and configuration changes raised through project change management.
- Review CISO Office threat intelligence and vendor advisories relevant to installed systems, and confirm contractors apply approved patches or compensating controls before handover.
8- Evidence, Reporting & Continuous Improvement
- Maintain the cybersecurity evidence repository for assigned projects to support milestone reporting, compliance reviews, Project Assurance Reviews and Internal Audit engagements.
- Prepare technical status reports, gap trackers and dashboard inputs for the PMO cybersecurity Manager.
- Implement agreed corrective actions from assurance and audit findings within the scope.
- Capture lessons learned from project delivery and propose improvements to ACWA cybersecurity specifications, checklists and test procedures.
- Compile the cybersecurity handover package (asset register, network architecture, configuration baselines, test reports, backup and recovery procedures, open risks) for the Project Company and Cybersecurity ACWA OPS.
- Provide technical inputs (asset lists, log sources, network diagrams) so the PMO cybersecurity manager can confirm that cybersecurity services and SLAs, such as SOC monitoring, are in place before handover and commissioning.
Committed to creating a culture that is as diverse AND vibrant as the markets we serve
رقم الإعلان لدى المصدر: 1368541423