📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة وظائف تناسب سيرتك الذاتيةمجاناً قناة تيليجرام

وظيفة مدير نمذجة معلومات البناء BIM شاغرة لدى Pinnacle Infotech Technologies بمدينة الرياض

BIM Manager
🕒 نُشرت: (أمس) 📍 الرياض وظائف الهندسة والتقنية

تفاصيل الوظيفة

تعلن شركة Pinnacle Infotech Solutions Ltd. Co. عن وظيفة مدير BIM (BIM Manager) بدوام كامل وفي الموقع، في مدينة الرياض بالمملكة العربية السعودية.

نبذة عن الوظيفة

  • تعمل الشركة، وهي رائدة عالمياً في استشارات BIM بخبرة تتجاوز 30 عاماً عبر دورة حياة البناء، كمستشار BIM لمشروع تطوير حرم جامعي واسع النطاق في الرياض.
  • نوع المشروع: تطوير حرم جامعي واسع النطاق يضم مجمعاً متعدد المباني، ومدته التقريبية 60 شهراً.
  • يتولى مدير BIM قيادة عمليات BIM في الموقع، ويكون الجهة المركزية للتنسيق والحوكمة والتحقق من BIM في المشروع.
  • يرفع التقارير إلى قيادة المشروع في الشركة، ويعمل كشريك BIM موثوق للعميل عبر مراحل التصميم والتنسيق والإنشاء والتسليم.

المهام والمسؤوليات

  • حوكمة BIM وقيادته: تأسيس إطار إدارة BIM للمشروع بما يتوافق مع استراتيجية BIM للعميل، وتحديد الأدوار والمسؤوليات وهياكل التقارير وإجراءات التصعيد، ومتابعة الامتثال للأطراف الخارجية، ورئاسة اجتماعات التنسيق، ومتابعة إغلاق المشكلات، وتصعيد المخاطر وحالات عدم الامتثال إلى قيادة العميل.
  • خطة تنفيذ BIM للمشروع (BEP): إعداد الخطة وتنفيذها خلال 14 يوماً تقويمياً من ترسية العقد، ومراجعة خطط BEP المقدمة من المصممين والمقاولين، وضمان الالتزام بها طوال دورة المشروع.
  • إدارة النموذج المدمج وتنسيقه: استلام النماذج التخصصية ومراجعتها وتنسيقها وصيانتها، وإنشاء نظام إحداثيات مشترك وضبط الشبكات والمناسيب والتوجيه الجغرافي، وضمان التكامل بين التخصصات المعمارية والإنشائية والميكانيكية والكهربائية والمدنية وتنسيق المناظر الطبيعية.
  • كشف التعارضات والتحقق من التنسيق: التحقق المستقل من تقارير كشف التعارضات، وإجراء مراجعات تنسيق مستقلة باستخدام Autodesk Navisworks Manage، وتصنيف المشكلات وترتيبها حسب الأولوية وإسنادها ومتابعتها حتى الإغلاق، والتأكد من جاهزية النماذج قبل كل مرحلة.
  • مراجعة النماذج وفحص جودتها: مراجعة نماذج المصمم الرئيسي عند نسب 30% و60% و90% و100% لمراحل IFC Design، وإجراء فحوصات صحة شهرية للنماذج، وإصدار تقارير رسمية للامتثال والتفتيش مع متابعة الإجراءات التصحيحية.
  • تطوير رسومات الورش: إعداد نماذج BIM لرسومات الورش والرسومات ثنائية الأبعاد من نماذج LOD 400 المنسقة، والتنسيق مع فرق الإنشاءات وحديد التسليح لإعداد جداول ثني الحديد (BBS) بصيغة Excel.
  • التنفيذ كما هو مبني (As-Built) والتسليم الرقمي: تطوير نماذج As-Built وصيانتها طوال مراحل التنفيذ، وإدراج تغييرات الموقع والتعديلات المعتمدة، والتنسيق لإعداد وتسليم مخرجات BIM النهائية ومعلومات الأصول ووثائق التسليم الرقمي.
  • حصر الكميات وCOBie: استخراج كميات تفصيلية (QTO) من نماذج LOD 400 المعتمدة، ودمج معلومات COBie وخصائص الأصول وفق قوالب العميل، ودعم تطوير نماذج معلومات الأصول (AIM) لإدارة المرافق والتشغيل.
  • التقارير ولوحات المتابعة: إنشاء سجلات حوكمة BIM ولوحات متابعة التقدم وأنظمة التقارير، وإعداد تقارير دورية عن الامتثال والتنسيق والمخاطر والمشكلات المعلقة، وتتبع مخرجات BIM مقارنة بمعالم المشروع والمتطلبات التعاقدية.
  • إدارة ضمان الجودة ومراقبتها (QA/QC): تطبيق ثلاث مراحل متتالية للتحقق: مراجعة شبكية من فرق العمل مقارنةً برسومات IFC/التصنيع، ومقارنة النسخ الورقية لرسومات IFC بالنماذج ثلاثية الأبعاد، ومراجعة نهائية قبل الإرسال يجريها مدير المشروع. والالتزام بهامش دقة ±5 مم في جميع التخصصات.

الشروط والمتطلبات

  • المؤهل العلمي: درجة البكالوريوس أو الماجستير في الهندسة المعمارية أو الهندسة المدنية أو الهندسة الإنشائية أو مجال ذي صلة.
  • الشهادات: يُفضّل الحصول على شهادة في إدارة BIM أو ما يعادلها، مثل Autodesk Certified Professional أو BRE Academy أو PMP.
  • الخبرة: 12 إلى 15 عاماً على الأقل من الخبرة الإجمالية في قطاع الهندسة والإنشاء والبناء (AEC)، منها 8 إلى 10 سنوات على الأقل من الخبرة المتخصصة في BIM.
  • خبرة مثبتة في دور قيادي لمدير BIM أو ما يعادله في مشاريع إنشائية واسعة ومتعددة التخصصات.

المهارات المطلوبة

  • Autodesk Revit: نمذجة العمارة والديكور والهياكل الخرسانية والمناظر الطبيعية.
  • Civil 3D: نمذجة المشاريع المدنية والبنية التحتية.
  • AutoCAD وRebar Plus: الرسم ثنائي الأبعاد لحديد التسليح وإعداد جداول ثني الحديد (BBS).
  • Autodesk Navisworks Manage: كشف التعارضات وتنسيق BIM.
  • Autodesk Construction Cloud (ACC): إدارة بيئة البيانات المشتركة (CDE).
  • MS Excel: مخرجات BBS وتقارير حصر الكميات (QTO).
عرض النص الأصلي للإعلان

JOB DESCRIPTION: BIM Manager

Company: Pinnacle Infotech Solutions Ltd. Co.

Location: Riyadh, Kingdom of Saudi Arabia

Work Mode: On-Site

Employment Type: Full-Time


About the Project

Pinnacle Infotech Solutions Ltd. Co., a global leader in BIM consultancy with over 30 years of experience across the construction lifecycle, has been appointed as the BIM Consultant for a prestigious large-scale campus development project in Riyadh, Saudi Arabia.

Project Highlights:

  • Location: Riyadh, KSA
  • Project Type: Large-Scale Campus Development (Multi-Building Complex)
  • Project Duration: Approximately 60 Months

This is an excellent opportunity to lead BIM operations on a landmark campus development project that contributes to the future of Saudi Arabia's built environment.


Job Summary

We are seeking an experienced and results-driven BIM Manager to lead and oversee BIM operations on-site in Riyadh, KSA. The incumbent will serve as the central BIM coordination, governance, and verification authority for the project.

Reporting to Pinnacle's project leadership, the BIM Manager will act as the Client's trusted BIM partner, ensuring effective governance, coordination, verification, and delivery of the project's digital information environment across design coordination, construction, and handover stages.


Key Responsibilities

1. BIM Governance & Leadership

  • Establish and implement the project BIM management framework in alignment with the Client's BIM Strategy.
  • Define BIM roles, responsibilities, reporting structures, and escalation procedures.
  • Monitor third-party BIM compliance and coordinate interfaces between all project stakeholders.
  • Chair BIM coordination meetings, maintain action trackers, and monitor issue closure.
  • Identify and escalate BIM risks, non-compliances, and coordination challenges to Client leadership.

2. Project BIM Execution Plan (BEP)

  • Prepare and implement the Project BIM Execution Plan within 14 calendar days of Contract Award.
  • Define BIM objectives, model ownership, LOD requirements, naming conventions, federation procedures, QA/QC workflows, and CDE protocols.
  • Review and verify BEPs submitted by third-party designers, contractors, and specialist subcontractors.
  • Ensure consistent implementation and compliance with the approved BEP throughout the project lifecycle.

3. BIM Model Management & Coordination

  • Manage the federated BIM environment, including receiving, reviewing, coordinating, and maintaining discipline models from all stakeholders.
  • Establish and maintain the project shared coordinate system, grids, levels, and georeferencing standards.
  • Ensure proper model federation, data exchange, and interoperability across architectural, structural, MEP, civil, and landscape disciplines.
  • Monitor model development and ensure compliance with project-specific LOD and information requirements.
  • Develop progressive As-Built BIM Models and As-Built 2D drawings based on client-provided redline mark-ups.

4. Clash Detection & Coordination Verification

  • Independently verify clash detection reports submitted by design authors and contractors.
  • Conduct independent clash detection and model coordination reviews using Autodesk Navisworks Manage.
  • Categorize, prioritize, assign, and track coordination issues through to closure.
  • Verify model readiness before each project milestone and progression stage.
  • Ensure models are adequately coordinated and clash-free before approval for construction and shop drawing development.

5. BIM Model Review & Health Checks

  • Review Lead Design Consultant models at key milestones: 30%, 60%, 90%, and 100% IFC Design stages.
  • Conduct monthly BIM Model Health Checks covering file integrity, model stability, object naming, parameter completeness, model performance, and suitability for federation.
  • Issue formal BIM Model Compliance and Inspection Reports identifying deficiencies and corrective actions.
  • Monitor implementation of corrective actions and ensure compliance with project BIM standards.

6. Shop Drawing Development

  • Develop shop drawing BIM models and produce 2D shop drawings from coordinated LOD 400 models.
  • Coordinate with structural and rebar teams for Bar Bending Schedule (BBS) production in Excel format.
  • Ensure shop drawings are coordinated, accurate, and aligned with approved IFC drawings and project specifications.

7. As-Built & Digital Handover

  • Develop and continuously maintain the Project As-Built BIM Model throughout the construction phases.
  • Incorporate approved site changes, redline mark-ups, and construction modifications into the As-Built models.
  • Ensure As-Built BIM models and drawings accurately reflect actual site conditions.
  • Coordinate the preparation and submission of final BIM deliverables, asset information, and digital handover documentation.

8. Quantity Take-Off & COBie

  • Extract detailed Quantity Take-Off (QTO) from approved LOD 400 models in standard formats.
  • Integrate COBie information and asset parameters into Pinnacle-owned models as per client-provided templates.
  • Ensure asset information is accurate, complete, and aligned with the Client's information requirements.
  • Support the development of Asset Information Models (AIM) for facility management and operational handover.

9. BIM Reporting & Dashboards

  • Establish and maintain BIM governance registers, progress monitoring dashboards, and reporting systems.
  • Prepare periodic BIM progress reports highlighting compliance, coordination status, risks, and outstanding issues.
  • Provide the Client with independent visibility of BIM compliance, progress, risks, and pending actions.
  • Track BIM deliverables against project milestones and contractual requirements.

10. QA/QC Management

  • Implement BIM QA/QC procedures across three consecutive phases:
  • QC Phase I: Grid-by-grid checks by team members against IFC/Fabrication drawings.
  • QC Phase II: Hard-copy IFC drawing checks against 3D BIM models.
  • QC Phase III: Pre-shipment final QC conducted by the Project Manager.
  • Ensure model accuracy tolerance of ±5 mm across all disciplines.
  • Establish quality control checkpoints and ensure timely closure of identified discrepancies.


Software Proficiency Required

SoftwareApplication

Autodesk Revit

Architecture, Interior, Concrete Structure, and Landscape Modelling

Civil 3D

Civil and Infrastructure Modelling

AutoCAD & Rebar Plus

2D Rebar and BBS Production

Autodesk Navisworks Manage

Clash Detection and BIM Coordination

Autodesk Construction Cloud (ACC)

Common Data Environment (CDE) Management

MS Excel

BBS Deliverables and QTO Reporting


Qualifications & Requirements

Education

  • Bachelor's or Master's degree in Architecture, Civil Engineering, Structural Engineering, or a related field.
  • Certification in BIM Management or equivalent (e.g., Autodesk Certified Professional, BRE Academy, PMP) will be preferred.

Experience

  • Minimum 12-15 years of overall experience in the AEC industry, with at least 8-10 years of dedicated BIM experience.
  • Proven experience in a BIM Manager or equivalent leadership role on large-scale, multi-disciplinary construction projects.
  • Prior experience in government, institutional, or large-scale campus development projects is highly desirable.
  • Hands-on experience across the full construction lifecycle, from design coordination through As-Built development and digital handover.
  • Experience working on large-scale projects in Saudi Arabia or the wider GCC region will be an advantage.

Technical Skills

  • Strong expertise in BIM standards, workflows, model management, and multidisciplinary coordination.
  • Extensive hands-on proficiency in Autodesk Revit, Navisworks Manage, Civil 3D, AutoCAD, and Autodesk Construction Cloud.
  • Proficiency in clash detection workflows, coordination issue resolution, and federated model management.
  • Hands-on experience with COBie data integration and Asset Information Model (AIM) development.
  • Familiarity with Digital Twin concepts and readiness frameworks.
  • Experience preparing and implementing Project BEPs, BIM Governance structures, and QA/QC protocols.
  • Strong understanding of LOD requirements, IFC deliverables, model validation, and construction documentation.

Leadership & Communication

  • Proven ability to manage and lead multidisciplinary BIM teams comprising architects, structural engineers, civil engineers, and landscape designers.
  • Strong stakeholder management skills, with the ability to coordinate with clients, contractors, subcontractors, and specialist consultants.
  • Excellent report-writing, presentation, and communication skills in English.
  • Arabic language proficiency will be an advantage.

What We Offer

  • Competitive compensation package commensurate with experience.
  • Opportunity to lead BIM operations on one of Saudi Arabia's prestigious large-scale construction projects.
  • Exposure to advanced BIM technologies and digital delivery workflows.
  • Dynamic and collaborative international working environment.
  • Career advancement opportunities within Pinnacle's expanding global operations.
  • Accommodation and travel support as per company policy (project-based).


About Pinnacle Infotech

Pinnacle Infotech is a global BIM consultancy with over 30 years of experience, delivering Construction Lifecycle Solutions across Architecture, Engineering, and Construction. With a strong presence in Saudi Arabia and global delivery capabilities, Pinnacle partners with leading contractors, developers, and government entities on landmark projects.

Our expertise spans BIM Modelling, Clash Coordination, Shop Drawings, As-Built Modelling, COBie, Digital Twin, and full project lifecycle digital delivery.


Website: www.pinnacleinfotech.com

Office Address: Regus, The Esplanade, Office No. 131, Prince Turki Ibn Abdulaziz Al Awwal Road, King Saud University, Riyadh 12371, Saudi Arabia.


Pinnacle Infotech Solutions Ltd. Co. is an equal opportunity employer. Only shortlisted candidates will be contacted.

المصدر: LinkedIn - أُضيفت للموقع في 18 نوفمبر 2026
رقم الإعلان لدى المصدر: 4490887714