تفاصيل الوظيفة
تعلن دبليو إس بي عن حاجتها إلى Piping Inspector ذي خبرة لدعم الإشراف على الإنشاء ومراقبة الجودة لتركيبات أنابيب التبريد المناطقي في الرياض، ضمن مناطق DCP وشبكة التبريد المناطقي وETS ونفق المرافق.
نبذة عن الوظيفة
يركز الدور على الإشراف الميداني على أنشطة تركيب الأنابيب، والتأكد من إنجاز أعمال الأنابيب والوصلات والصمامات والدعامات واللحام/الوصل والتركيبات المرتبطة وفقاً للمخططات والمواصفات المعتمدة وبيانات الطريقة والمعايير المعمول بها.
المهام والمسؤوليات
- الإشراف على تركيب أنظمة أنابيب المياه المبردة وأنابيب العمليات المرتبطة داخل مناطق DCP والشبكة وETS ونفق المرافق.
- مراقبة مسارات الأنابيب والتركيب والمحاذاة وجودة التنفيذ مقابل مخططات IFC المعتمدة وP&IDs.
- فحص الأنابيب والوصلات والصمامات والفلنجات والدعامات والمثبتات والمكونات المرتبطة.
- التحقق من مطابقة المواد التي يتم تركيبها مع تقديمات المواد المعتمدة ومواصفات المشروع.
- مراقبة تركيب دعامات الأنابيب والتأكد من الالتزام بتفاصيل الدعامات المعتمدة.
- مراقبة أنشطة تصنيع وتركيب الأنابيب بما يشمل التجهيز واللحام/الوصل والتركيب.
- تنسيق الأنشطة الميدانية والواجهات مع فرق الإنشاء الميكانيكية والكهربائية والفرق المعنية الأخرى.
- تحديد الاختلافات بين ظروف الموقع والمخططات المعتمدة ورفعها فوراً إلى المهندس المسؤول.
- دعم تنفيذ متطلبات QA/QC لأعمال تركيب الأنابيب.
- إجراء عمليات الفحص المرتبطة بـ MIRs وWIRs وتقديم المدخلات الفنية إلى المهندس المسؤول.
- مراقبة التزام المقاول ببيانات الطريقة المعتمدة وITPs.
- مراجعة/التحقق من سجلات تركيب الأنابيب ووثائق اللحام/الوصل المعنية.
- مراقبة جودة التنفيذ والإبلاغ عن العيوب والتركيبات غير المطابقة.
- المساعدة في رفع ملاحظات الموقع/NCRs ومراقبة تنفيذ الإجراءات التصحيحية.
- المشاركة في جولات فحص الأنابيب وفحوصات إنجاز الإنشاء.
- مراقبة إغلاق بنود punch-list الإنشائية.
- مراقبة تقدم أعمال الأنابيب اليومي والإبلاغ عن الحالة/المشكلات إلى المهندس الميكانيكي/مدير المشروع المسؤول.
- تنسيق عمليات الفحص مع المقاول وفريق الإنشاء وفق الأولويات المتفق عليها.
- تركيز الإشراف على أنشطة تركيب الأنابيب الحرجة ونقاط التوقف والأعمال الحساسة للجودة.
- دعم عمليات الفحص الدورية والقائمة على المخاطر لأنشطة الشبكة المتكررة.
- حضور اجتماعات تنسيق الإنشاء/الموقع عند الحاجة.
- الحفاظ على سجلات الفحص والموقع الدقيقة.
- مراجعة سجلات تركيب الأنابيب والمساهمة في ملفات الإنجاز.
- التحقق من mark-ups الإنشائية ودعم مراجعة وثائق الأنابيب as-built.
- المشاركة في جولات الفحص النهائية للإنشاء.
- دعم إغلاق الملاحظات المعلقة وNCRs وبنود punch-list.
- مراجعة الأجزاء المتعلقة بالأنابيب في حزم إغلاق الإنشاء/التسليم.
الشروط والمتطلبات
- دبلوم أو درجة بكالوريوس في الهندسة الميكانيكية أو هندسة الأنابيب أو تخصص تقني ذي صلة.
- خبرة من 8 إلى 12 سنة في إنشاء/الإشراف على الأنابيب في مشاريع البنية التحتية الكبرى أو المرافق أو التبريد المناطقي أو المياه أو المشاريع الصناعية.
- يُفضل بشدة وجود خبرة في أنابيب المياه المبردة/التبريد المناطقي ذات الأقطار الكبيرة والتركيب تحت الأرض أو في نفق المرافق.
المهارات المطلوبة
- معرفة عملية قوية بتركيب الأنابيب والتصنيع واللحام والصمامات والوصلات والدعامات والمثبتات وأنشطة الإنشاء المرتبطة.
- القدرة على قراءة P&IDs ومخططات الأنابيب وisometrics وتفاصيل الدعامات ومخططات IFC.
- الإلمام بفحص اللحام وWPS/PQR ووثائق NDT ومتطلبات جودة الأنابيب يُعد ميزة.
عرض النص الأصلي للإعلان
We are seeking an experienced Piping Inspector to support construction supervision and quality monitoring of district cooling piping installations within the DCP, district cooling network, ETS and utility tunnel areas.
The role will focus on field supervision of piping installation activities, ensuring that pipework, fittings, valves, supports, welding/jointing and associated installations are completed in accordance with approved drawings, specifications, method statements and applicable standards.
Piping Construction Supervision
- Supervise installation of chilled water and associated process piping systems within the DCP, network, ETS and utility tunnel areas.
- Monitor pipe routing, installation, alignment and workmanship against approved IFC drawings and P&IDs.
- Inspect piping, fittings, valves, flanges, supports, anchors and associated components.
- Verify that materials being installed correspond with approved material submissions and project specifications.
- Monitor pipe support installation and ensure compliance with approved support details.
- Monitor piping fabrication and erection activities including fit-up, welding/jointing and installation.
- Coordinate field activities and interfaces with mechanical, electrical and other relevant construction teams.
- Identify discrepancies between site conditions and approved drawings and promptly escalate them to the responsible Engineer.
Quality Monitoring
- Support implementation of QA/QC requirements for piping installation works.
- Conduct inspections associated with MIRs and WIRs and provide technical input to the responsible Engineer.
- Monitor contractor compliance with approved Method Statements and ITPs.
- Review/verify piping installation records and applicable welding/jointing documentation.
- Monitor workmanship and report defects and non-conforming installations.
- Assist in raising site observations/NCRs and monitor implementation of corrective actions.
- Participate in piping walkdowns and construction completion inspections.
- Monitor closure of construction punch-list items.
Progress & Coordination
- Monitor daily piping construction progress and report status/issues to the responsible Mechanical Engineer/Project Manager.
- Coordinate inspections with the contractor and construction team based on agreed priorities.
- Focus supervision on critical piping installation activities, hold points and quality-sensitive works.
- Support risk-based and periodic inspections for repetitive network activities.
- Attend construction coordination/site meetings where required.
- Maintain accurate inspection and site records.
Documentation & Handover
- Review piping installation records and contribute to completion dossiers.
- Verify construction mark-ups and support review of as-built piping documentation.
- Participate in final construction walkdowns.
- Support closure of outstanding observations, NCRs and punch-list items.
- Review relevant piping portions of construction close-out/handover packages.
- Diploma or Bachelor Degree in Mechanical Engineering, Piping Engineering or a related technical discipline.
- 8-12 years of piping construction/supervision experience on major infrastructure, utility. District cooling, water or industrial projects.
- Strong hands-on knowledge of piping installation, fabrication, welding valves, fittings, supports, anchors and associated construction activities.
- Experience with large -diameter chilled water/district cooling piping and underground or utility tunnel installation is strongly preferred.
- Ability to read P&ID’s, piping layouts, isometrics, support details and IFC drawings.
- Familiarity with welding inspection, WPS/PQR, NDT documentation and piping quality requirements is advantageous.
Imagine a better future for you and a better future for us all.
Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself?
With us, you can. Apply today.
#LI - Onsite
رقم الإعلان لدى المصدر: 99851