📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة وظائف تناسب سيرتك الذاتيةمجاناً قناة تيليجرام

وظيفة مهندس عمليات سفن شاغرة لدى Global Projects Services AG في الدمام

Vessel Operations Engineer
🕒 نُشرت: (أمس) 📍 الدمام وظائف الهندسة والتقنية

تفاصيل الوظيفة

تعلن Global Projects Services AG (Saipem) عن وظيفة Vessel Operations Engineer ضمن مشروع LTA في الدمام بالمنطقة الشرقية، السعودية. وتتمثل المهمة الأساسية في قيادة جاهزية عمليات السفينة والعمل كممثل للمشروع على متن السفينة.

نبذة عن الوظيفة

  • المشروع: LTA.
  • خلال مرحلة تحضير المشروع: التعاون مع Project Operations Manager وVessel Asset Manager للتحقق من صحة الإجراءات المقترحة وتنفيذ الحلول الأكثر كفاءة وفعالية من حيث التكلفة، وتحديد النواقص وتحسينات المعدات المطلوبة على المتن.
  • خلال تنفيذ المشروع: العمل كنقطة مرجعية بين فريق المشروع وفريق إدارة السفينة، واقتراح تعديلات وتحسينات مع مراعاة مقترحات الإدارة على المتن والتنسيق مع ممثلي العميل على المتن.
  • الوظيفة مكتبية مع أنشطة بحرية عرضية عند بدء حملة العمل البحري.
  • بدء العمل في أقرب وقت ممكن.

المهام والمسؤوليات

  • التأكد من الالتزام بمتطلبات QA/QC وHSE.
  • مراجعة وثائق المشروع والإبلاغ عن الأخطاء/الإغفالات واقتراح التحسينات.
  • المساعدة في التنسيق مع ممثلي العميل/المقاولين من الباطن.
  • مراقبة تقدم العمل/ظروف الموقع وإبلاغ فوري عند احتمال حدوث تغييرات في جدول المشروع/تسلسل التنفيذ.
  • دعم Vessel Management Team في تخطيط/تنفيذ العمل ومتطلبات المشروع التعاقدية والفنية.
  • المشاركة في حل أي مشاكل فنية.
  • تقديم مدخلات/دعم تشغيلي لفرق المشروع على الشاطئ.
  • التنسيق مع Installation/Method Engineers خلال مرحلة التحضير/التعبئة/التركيب.
  • مراجعة إجراءات التركيب/خطط loadout/sea fastening لنقل المواد/الهياكل بحرياً لضمان تركيب آمن وفي الوقت المناسب.
  • التأكد من اكتمال قوائم مواد البناء/المستهلكات بالتنسيق مع Project Coordinator لضمان الشراء/التسليم في الوقت المناسب.
  • التنسيق مع Mobile Equipment وAsset وPiptec وROV وTrenching وprecommissioning وHook-up لضمان توفر جميع الأفراد/المعدات اللازمة في الوقت المناسب.
  • حضور/فحص أنشطة pre-rigging/loadouts/sea fastening.
  • تحديد أي انحرافات عن الإجراءات وإدارتها حسب الطلب.
  • التنسيق مع Fabrication Dept لعمل loadout للهياكل المصنعة/مساعدات التركيب.
  • تقديم مدخلات/ملاحظات لتقرير إغلاق الهندسة لتحسين معايير/طرق عمل/إرشادات القسم.
  • قيادة تحسين كفاءة تخطيط المشروع (إعادة استخدام installation aids، تغيير tensioner pads، mob/demob للمعدات، اتساق ROV tooling).
  • تنسيق التحضير العام والواجهات ذات الصلة مع جميع الأقسام المرتبطة بالنطاق (engineering، installation engineering، procurement، post order services، assets).
  • متابعة شراء ولوجستيات installation aids.
  • قيادة أنشطة المقاولة من الباطن (مثل survey & positioning، ROV services، NDT، diving، precommissioning، إلخ).
  • التنسيق مع أقسام procurement/fabrication لتسليم العناصر المدمجة في الموقع البحري، بما في ذلك تجهيز سفن النقل المرتبطة بالشحنة المقدمة لسفينة البناء.
  • قيادة تأهيل سفينة/سفن التركيب تجاه العميل.
  • قيادة إعداد الموارد البشرية لمشروع سفينة التركيب.
  • قيادة إعداد معدات سفينة التركيب.
  • قيادة إعداد mobilization/demobilization لسفينة التركيب.
  • حضور منشآت التصنيع لضمان الجاهزية لنقل العناصر المصنعة إلى الموقع.
  • تنسيق العملية البحرية على متن سفينة التركيب كممثل للمشروع على المتن.
  • مراجعة وتجميع DPR (Daily Progress Reports) لنشاط السفينة وتقدم العمل خلال العملية البحرية.
  • تجميع جميع المعلومات المطلوبة حسب متطلبات المشروع لإغلاق المشروع وإغلاق عملية الفوترة.

الشروط والمتطلبات

  • درجة بكالوريوس في الهندسة الميكانيكية أو الإنشائية أو البحرية أو المدنية.
  • خبرة لا تقل عن 3 إلى 5 سنوات في أنشطة البناء البحري.
  • تعد الخبرة البحرية في العمل مع Heavy Lift Vessels (HLV) وPipelay Vessels وDive Support Vessels (DSV) وCable Laying Vessels (CLV) ميزة إضافية.
  • يفضل درجة ماجستير أو بكالوريوس في الهندسة.
  • إجادة اللغة الإنجليزية مطلوبة.
  • الإلمام بأكواد ومعايير الصناعة المعمول بها في تصميم وبناء وتركيب منشآت النفط والغاز البحرية.
  • المعرفة بمختلف أنواع خطوط الأنابيب البحرية offshore pipeline.
  • خبرة VOE في خلفية Fixed Facilities / Pipeline / Shorepull / Cable Lay / MSV / DSV.
  • الخبرة في vessel mobilization وoffshore installation وheavy lifting.

المهارات المطلوبة

  • مهارات تواصل وتنسيق ممتازة.
  • القدرة على العمل في بيئة سريعة ومتغيرة.

المزايا

  • عقد لمدة 12 شهراً قابلاً للتمديد حسب احتياجات الشركة.
  • حزمة مزايا شاملة تتضمن التأمين الصحي.
  • نموذج One Saipem Way للمهارات الناعمة يركز على تطوير المهارات والنمو الوظيفي وفرص الابتكار عبر التحديات المعقدة، مع تعزيز التواصل والتعاون لتحقيق الأهداف المشتركة.
  • بيئة عمل تؤكد على التنوع وتكافؤ الفرص وعدم التمييز.
  • تركيز على السلامة والاستدامة والحفاظ على صحة الأفراد والنظام البيئي الطبيعي.
عرض النص الأصلي للإعلان
Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions. Always oriented towards technological innovation, the company’s purpose is “Engineering for a sustainable future”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than 50 countries around the world and employs about 30,000 people of over 130 nationalities.

Project: LTA

Job Title: Vessel Operations Engineer

Location: KSA

Job Description

The primary mission of the Operation Engineer is to lead the readiness for the vessel operations and be the project representative on board the vessel. During the project preparation phase, the employee shall collaborate with Project Operations Manager and Vessel Asset Manager in order to verify that the suggested procedures are correct, and that the most efficient and cost-effective solutions are implemented. They must as well quickly distinguish the missing points and required optimization of the equipment to be used on board.

During project execution, the employee shall be the reference point between the project team and the Vessel Management Team. They shall be able to suggest modifications and changes leading to improvements considering the suggestions of the on-board management as well as interface with the on-board client representatives.

Key Responsibilities

  • Ensure compliance with QA/QC&HSE requirements.
  • Review project documentation, report errors/omissions, and suggest improvements.
  • Assist in liaising with Client Representatives/subcontractors.
  • Monitor progress of work/site conditions and promptly advise if changes to project schedule/execution sequence may occur.
  • Support Vessel Management Team in planning/execution of work/project contractual & technical requirements.
  • Participate in the resolution of any technical problems.
  • Provide operational input/support to onshore project teams.
  • Liaise with Installation/Method Engineers during preparatory/mobilization/installation phase.
  • Review installation procedures/loadout/sea fastening plans for material/structures offshore transportation to ensure safe/timely installation.
  • Ensure completeness of construction materials/consumables lists liaising with Project Coordinator for timely procurement/delivery.
  • Coordinate with Mobile Equipment, Asset, Piptec, ROV, Trenching, precommissioning, Hook-up to ensure that all necessary personnel/equipment are timely available.
  • Witness/inspect pre-rigging/loadouts/sea fastening activities.
  • Identify any deviations from procedures and manage as requested.
  • Coordinate with Fabrication Dept for loadout of fabricated structures/installation aids.
  • Provide input/feedback for engineering close-out report to improve departmental standards/working methods/guidelines.
  • Lead project planning efficiency optimization (installation aids re-use, tensioner pad change-outs, equipment mob/demob, ROV tooling consistency).
  • Coordinate the general preparation and related interfaces with all the departments related to scope (engineering, installation engineering, procurement, post order services, and assets).
  • Follow-up the procurement & logistics of installation aids.
  • Lead the subcontracting activities (i.e., survey & positioning, ROV services, NDT, diving, precommissioning, etc.).
  • Interface with procurement/fabrication departments for the delivery of incorporated items on the offshore site, including transportation vessels preparation associated with the cargo to be provided to the construction vessel.
  • Lead the installation vessel(s) qualification(s) towards the client.
  • Lead the installation vessel project HR preparation.
  • Lead the installation vessel equipment preparation.
  • Lead the mobilization/demobilization preparation of the installation vessel.
  • Attend fabrication facilities to ensure readiness for transportation to site of fabricated items.
  • Coordinate the offshore operation on board the installation vessel as project representative on board.
  • Review and Compile the DPR (Daily Progress Reports) of the vessel activity and progress during the offshore operation.
  • Compile all the required information as per the project requirements for the project close-out and close out of the invoicing process.

Job Specifications

  • Bachelor’s degree in mechanical, Structural, Marine or Civil Engineering
  • Minimum 3 to 5 years’ experience in offshore construction activities.
  • Offshore experience working with Heavy Lift Vessels (HLV), Pipelay Vessels, Dive Support Vessels (DSV), and Cable Laying Vessels (CLV) is a plus.
  • Excellent communication and coordination skills.
  • Ability to work in a fast-paced and dynamic environment.

Special Skills/Knowledge

  • Familiar with industry codes and standards applicable to offshore Oil & Gas facilities design, construction and Installation
  • Knowledgeable in various offshore pipeline
  • VOE with the background of Fixed Facilities / Pipeline/Shorepull/Cable Lay/MSV/DSV.

What are we looking for?

Education: Master's Degree/bachelor’s degree in: Engineering (preferred)

Languages: English Language skills required

Technical Knowledge: Experienced in vessel mobilization, offshore installation, heavy lifting

What else should you know? Start date is as soon as possible. The position is office-based, with occasional offshore activities once offshore campaigne begins.

What We Can Offer To You

  • 12 month contract (subject to extension according to Company needs)
  • Corporate Benefits: We offer a comprehensive benefits package, including health insurance.
  • Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.

Additional Information

We embrace diversity! At Saipem, we believe that innovation thrives through diversity. As an Equal Opportunity Employer, we stand against discrimination based on gender identity, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of SAIPEM companies unique.

Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.

Find out more in our career page: https://gps.ncorehr.com/
المصدر: LinkedIn - أُضيفت للموقع في 21 نوفمبر 2026
رقم الإعلان لدى المصدر: 4458187008