تفاصيل الوظيفة
تعلن شركة GE Vernova عن وظيفة Coating Technician-1 في الدمام، المنطقة الشرقية، للعمل في عمليات الطلاء بالرش الحراري لمكونات التوربينات الغازية.
نبذة عن الوظيفة
يدعم فني الطلاء عمليات الطلاء بالرش الحراري على مكونات التوربينات الغازية، ويشمل ذلك الوزن قبل الطلاء وبعده وتطبيق الطلاء. إلى جانب تنفيذ خطوات العمل بأمان ودقة، يُتوقع منه تطبيق سلوكيات Lean الفعّالة، والمشاركة في حل المشكلات، والمحافظة على معايير 5S، والإسهام في مبادرات التحسين المستمر التي ترفع مستوى السلامة والجودة والتسليم والإنتاجية. ويؤدي الفني دوراً مهماً في تطبيق Lean بشكل عام من خلال تحديد فرص التحسين، ودعم العمل المعياري، وتقليل الهدر، وتحسين تدفق العمليات وأدائها التشغيلي.
المهام والمسؤوليات
- تنفيذ تطبيق الطلاء وفق تعليمات العمل المعتمدة ومعايير العملية والمتطلبات الهندسية.
- تنفيذ عملية التغطية (Masking) للطلاء عند الحاجة وفق تعليمات العمل ومواصفات العملية المعتمدة.
- قراءة وتفسير تعليمات العمل ونماذج الجودة لضمان دقة تطبيق الطلاء.
- تسجيل بيانات العملية والقياسات وحفظها بدقة عند الحاجة.
- استخدام معدات الطلاء وأجهزة الوزن والتركيبات (Fixtures) والأدوات اليدوية بأمان وفعالية.
- فحص القطع قبل عمليات الطلاء وبعدها للتأكد من مطابقتها لمتطلبات الجودة.
- الالتزام بالعمل المعياري وأوراق تركيب العمل المعياري (Standard Work Combination Sheets) لضمان الاتساق والجودة والسلامة وانسيابية خط الإنتاج.
- الحفاظ على منطقة عمل نظيفة وآمنة ومنظمة وفق معايير 5S.
- تطبيق مبادئ Lean بوضوح في الأنشطة اليومية للعمل.
- المشاركة الفعالة في حل المشكلات وتحليل الأسباب الجذرية وإجراءات التصحيح لمعالجة مشكلات العملية أو الجودة.
- تحديد فرص التحسين المستمر في السلامة والجودة ووقت الدورة والتدفق وتقليل الهدر، والإبلاغ عنها.
- دعم التحسينات في العمل المعياري وتنظيم الخط والإدارة البصرية وانضباط العمليات.
- المساهمة في جهود الفريق التي تحسّن أداء الخط والكفاءة التشغيلية والإنتاجية العامة للورشة.
- العمل ضمن زمن الـ Takt ووقت الدورة وتوقعات تدفق العملية المعيارية لدعم أهداف الإنتاج.
- استخدام أنظمة الورشة والواجهات مثل ELM وSmartShop عند الحاجة.
- الالتزام بسياسات الجودة الخاصة بالشركة ومتطلبات السلامة والإجراءات المعمول بها والعمل المعياري.
الشروط والمتطلبات
- دبلوم، أو درجة من كلية تقنية، أو خبرة عملية معادلة.
- معرفة أو خبرة في دور فني أو تصنيع أو طلاء أو دور صناعي.
- مفضّل: خبرة لا تقل عن سنتين في عمليات الطلاء الحاجز الحراري (Thermal Barrier Coating).
- مفضّل: المشاركة في أنشطة حل المشكلات أو تحسين العمليات.
- مفضّل: خبرة لا تقل عن سنتين في العمل على مكونات التوربينات الغازية أو غيرها من الأجزاء الدقيقة للصناعات الفضائية أو الصناعية.
المهارات المطلوبة
- فهم وتطبيق مبادئ Lean
- تطبيق معايير 5S
- حل المشكلات وتحليل الأسباب الجذرية
- قراءة تعليمات العمل ونماذج الجودة وتفسيرها
- استخدام أنظمة الورشة مثل ELM وSmartShop
عرض النص الأصلي للإعلان
The Coating Technician - is responsible for supporting thermal spray coating operations on gas turbine components, including pre-coat and post-coat weighing and coat application processes. In addition to executing process steps safely and accurately, this role is expected to demonstrate strong Lean behaviors, actively support problem solving, maintain 5S standards, and contribute to continuous improvement initiatives that enhance safety, quality, delivery, and productivity across the line.
The technician plays an important role in driving overall Lean implementation by identifying improvement opportunities, supporting standard work, reducing waste, and helping improve process flow and operational performance.
Job Description
Key Responsibilities
- Perform Coat Application in accordance with approved work instructions, process standards, and engineering requirements.
- Perform Mask for Coating in accordance with approved work instructions and process specifications if required.
- Read and interpret work instructions and quality forms to ensure accurate coating application.
- Record and maintain accurate process and measurement data as required.
- Use coating equipment, weighing devices, fixtures, and hand tools safely and effectively.
- Inspect parts before and after coating processes to ensure conformance to quality requirements.
- Adhere to Standard Work and Standard Work Combination Sheets to ensure consistency, quality, safety, and efficient line flow
- Maintain a clean, safe, and organized work area in accordance with 5S standards.
- Demonstrate strong understanding and application of Lean principles in daily work activities.
- Actively participate in problem solving, root cause analysis, and corrective action activities to address process or quality issues.
- Identify and communicate opportunities for continuous improvement in safety, quality, cycle time, flow, and waste reduction.
- Support improvements in standard work, line organization, visual management, and process discipline to strengthen overall Lean implementation.
- Contribute to team efforts that improve line performance, operational efficiency, and overall shop productivity.
- Work within takt time, cycle time, and standard process flow expectations to support production goals.
- Use shop floor systems and interfaces such as ELM and SmartShop, as required.
- Comply with company quality policies, safety requirements, applicable procedures, and standard work.
- Diploma, technical college degree, or equivalent hands-on experience.
- Knowledge or experience in a technician, manufacturing, coating, or industrial role.
- Min 2 years’ experience with Thermal Barrier Coating processes.
- Participating in problem solving or process improvement activities.
- Min 2 years’ experience working with gas turbine components or other precision aerospace/industrial parts.
Relocation Assistance Provided: No
رقم الإعلان لدى المصدر: 4489809127