تفاصيل الوظيفة
تعلن شركة GE Vernova عن فرصة لوظيفة مهندس فحص وتشغيل تجريبي (Testing and Commissioning Engineer) في مدينة الرياض، السعودية.
نبذة عن الوظيفة
يتولى مهندس الفحص والتشغيل التجريبي مسؤولية بدء وتنسيق وإتمام أعمال الفحص والتشغيل التجريبي لأنظمة الحماية والتحكم في المحطات الكهربائية الفرعية، وذلك وفق الأهداف العامة للمشروع (السلامة، والجودة، والتكلفة، والتسليم) وبما يتوافق مع المواصفات الفنية للعقد.
المهام والمسؤوليات
- تنظيم وإدارة جميع اختبارات المحطات الكهربائية الفرعية
- إعداد خطة الاختبار وإجراءات الاختبار المرتبطة بها
- تنفيذ جميع أنواع اختبارات الموقع لأنظمة الحماية والتحكم
- إعداد جدول الاختبارات وتحديثه بما يتوافق مع الجدول الزمني العام
- إدارة معدات الاختبار في الموقع، مثل أجهزة القياس الرقمية ومجموعات الحقن وأجهزة قياس القدرة، والتأكد من سريان شهادات معايرتها
- التحقق من أن جميع الاختبارات المنفذة في الموقع تتوافق مع متطلبات العقد (الجودة والنوع)
- إصدار تقارير عدم المطابقة وإدارتها عند الحاجة
- ضمان تحديث جميع المخططات بالتعديلات اللازمة لإعداد وثائق as-built
- تجميع تقارير الاختبار وتعبئتها، والتأكد من اعتمادها وتوقيعها من الاستشاري (إن وجد) أو العميل
- تنظيم وإدارة النسخ الاحتياطية لجميع ملفات الأجهزة الحاسوبية، مثل إعدادات أجهزة الحماية (Relays) وتهيئة المعدات، لتسليمها مع المخططات المعدلة
- ضمان الالتزام بسياسات PMH وGRID للجودة والصحة والسلامة والبيئة (EHS) وإجراءات نظام الإدارة المتكامل (IMS)
- تسجيل بيانات أهداف الجودة ومؤشرات الأداء الرئيسية (KPI) وإعداد تقارير عنها
- التنسيق مع العميل بشأن الأنشطة اليومية
- التوصية بالتعديلات الميدانية المفيدة لتشغيل المحطة أو اللازمة لتحقيق تشغيل تجريبي فعّال
- إعداد تقرير التشغيل التجريبي النهائي، يوضح المشكلات والتعديلات الهندسية المقترحة وتحسينات كفاءة الفريق وتقييم أداء الكوادر، بما يضمن نقل الخبرة المكتسبة من كل تشغيل تجريبي إلى فريق المشروع
- إعداد تقارير الإنجاز الشهرية لأنشطة فريق التشغيل التجريبي، مع الإشارة إلى أي أحداث سلبية مثل التأخيرات وأخطاء التصميم أو التركيب ونقص قطع الغيار
- متابعة إجراءات السلامة، بما في ذلك تصاريح العمل وأساليب العمل وتقييمات المخاطر وإجراءات LOTO وجميع الأنشطة عالية الخطورة، أثناء تسلسل التشغيل واستخدام المعدات والمواد
الشروط والمتطلبات
- بكالوريوس في الهندسة الكهربائية أو تخصص هندسي ذي صلة
- خبرة لا تقل عن 7 سنوات كمهندس فحص وتشغيل تجريبي في صناعة مماثلة
- إلمام ومعرفة متخصصة بأنظمة الحماية والتحكم في المحطات الفرعية، بما يشمل لوحات الحماية لمستويات الجهد 400/132/33/11 كيلوفولت (حماية قضبان التوزيع، وحماية الخطوط، وحماية المحولات، ومخططات المقارنة والاستقرار، وفصل الأحمال، وحماية المكثفات، وغيرها)
- معرفة قوية بجميع لوحات التحكم لمختلف المستويات، بما في ذلك AVR وABTS وACCS وAMR، وغيرها
- إتقان اللغتين الإنجليزية والعربية
- لا تتوفر مساعدة في الانتقال للمنصب
المهارات المطلوبة
- معرفة قوية بتصميم أنظمة SAS واختبارها وتشغيلها التجريبي
- معرفة جيدة بإعداد ملفات الواجهة (CID) مع أنظمة SAS
- القدرة على التأثير في أصحاب المصلحة الداخليين والإدارات الأخرى أفقياً ورأسياً لتحقيق أهداف المشروع المشتركة
- القدرة على عرض أهم قضايا المشروع بإيجاز على القيادة العليا باستخدام وسائل بصرية مناسبة
- القدرة على إدارة علاقات العملاء والشركاء والجهات الخارجية تحت الضغط، مع الحفاظ على أهداف العمل والمشروع
- القدرة على بناء روح فريق حقيقية وتحقيق الملكية المشتركة لأهداف المشروع
- القدرة على إظهار الذات كقائد حقيقي للمشروع وصاحب القرار التعاوني النهائي
- حس قوي بالاستعجال والتركيز على تحقيق النتائج
- ميل طبيعي لأن يكون عنصر تغيير، والمساهمة في مبادرات التطوير التشغيلي الأوسع للأعمال
عرض النص الأصلي للإعلان
The Testing & Commissioning Engineer is responsible for commencing, coordinating and completion of Testing & Commissioning Works of the Electrical substation protection and control systems in accordance with the overall targets (Safety, Quality, Cost and Delivery) defined for the Project and in line with the technical specifications of the Contract.
Job Description
Key Responsibilities
- Organizing and managing all the substation tests
- Preparing test plan and associated test procedures
- Carrying out all type of site tests of protection and control systems.
- Establishing and updating testing schedule, in accordance with overall schedule
- Managing test equipment at site such as: digital multi-meters, injection sets, watt-meters, etc., and ensure their calibration certificates are valid.
- Checking all tests done on site are in accordance with contact requirements (quality, type)
- Issuing and managing non-conformance reports when required
- Ensuring marked-up of all drawings for preparation of as-built documentation
- Centralizing/filling test reports and ensuring they are duly approved/signed by Consultant (if any) or Client
- Organizing and managing the backup of all equipment computer files such as protection relays settings equipment configuration etc., in order to deliver them along with marked-up drawings
- Ensuring compliance to PMH, GRID Quality & EHS Policies and IMS procedures
- Recording and reporting of Quality Objectives & KPI data
- Coordination with Client for Daily activities
- Recommend field changes beneficial to plant operations or necessary for efficient commissioning.
- Prepare final Commissioning report highlighting problem areas, recommended engineering changes, improvements in organizational efficiency and personnel performance evaluations to ensure that experience gained from each Commissioning is fed back to PM Team.
- Prepare monthly progress reports of activities performed by Commissioning group and highlight any negative events such as delays, design/erection errors, missing spares etc.
- Check on safety procedures - Permits, Method Statements, Risk Assessments, LOTO and all high-risk activities are followed during operation sequences and in use of equipment and materials.
- Bachelor Degree in Electrical Engineering or relevant bachelor degree
- Minimum 7 years working experience as a Testing and Commissioning Engineer in a similar industry.
- Familiar with specialized in Protection & Control, Sub-Station protectionincluding: all protection panels for different voltage levels 400/132/33/11kV (BusBar prot. line prot., BS prot., BC prot., transformer prot. scheme check, stability, Load shedding, Capacitors Prot..etc.).
- Strong knowledge in all Control panels for different level (incl. AVR, ABTS, ACCS, AMR), and others.
- Strong knowledge in SAS design, testing and commissioning
- Good knowledge to prepare interface ( CID ) files with SAS systems
- Ability to influence internal stakeholders and functions laterally and upwards to achieve common project goals
- Ability to succinctly communicate to senior leadership key project issues with appropriate visual aids
- Proficiency in English and Arabic
- Ability to manage customer, partner and external relations under pressure while remaining mindful of business/project goals
- Ability to create genuine team dynamics and shared ownership of project goals
- Ability to project self as true leader of the project and ultimate collaborative decision maker
- Strong sense of urgency & drive for results
- Natural instinct to be a change agent and contribute to wider business Operational improvement/evolution initiatives
Relocation Assistance Provided: No
رقم الإعلان لدى المصدر: 4489814042