JAL International Co. Ltd. تعلن عن وظيفة مهندس أول لضمان الجودة ومراقبتها في الجبيل
تفاصيل الوظيفة
تعلن شركة JAL International Co. Ltd. عن وظيفة مهندس ضمان الجودة ومراقبة الجودة أول (Senior QA/QC Engineer) في مدينة الجبيل، المنطقة الشرقية، المملكة العربية السعودية.
نبذة عن الوظيفة
نبحث عن مهندس ضمان جودة ومراقبة جودة أول ذي خبرة لتولي الإشراف المستقل على الجودة استناداً إلى الأدلة، ويشمل ذلك تخطيط الجودة، والواجهات الهندسية والموردين، والتصنيع، والفحص، والاختبار، ومراقبة عدم المطابقة، وتسليم المشروع. ستعمل بشكل مستقل ضمن الصلاحيات المفوضة إليك، وتنسق الواجهات الفنية، وتدرك المخاطر، وتقدم التوجيه والتدريب للزملاء الأقل خبرة. حدود الصلاحية: يبقى اعتماد الهندسة، وتشغيل العمليات، والتصرف الرسمي في المنتج، والإفراج النهائي، من اختصاص شاغلي الأدوار المعتمدين المحددين والمخطط التنظيمي أو الكودي المطبق.
المهام والمسؤوليات
- إعداد خطط الجودة للمشروع وخطط الفحص والاختبار (ITP) أو مراجعتها، استناداً إلى متطلبات العقد والمتطلبات النظامية ومتطلبات العميل، مع تحديد مراحل الفحص ومعايير القبول ونقاط الانتظار والشهود والتتبع والسجلات.
- مراجعة المواصفات والمخططات والتعديلات عليها من حيث الجودة وقابلية الفحص، وحل التعارضات من خلال استفسارات فنية موثقة.
- تقييم مخاطر جودة الموردين وقدراتهم، وتخطيط عمليات التدقيق وفحوصات المصدر القائمة على المخاطر، ومتابعة تقارير عدم المطابقة الخاصة بالموردين حتى الإغلاق المتحقق منه.
- التحكم في تعريف المواد وتتبعها من الاستلام حتى التسليم، بما في ذلك الاستبدالات والعزل.
- تنسيق ضوابط اللحام والتصنيع، including الإجراءات والكوادر والمواد الاستهلاكية والتسخين المسبق وتسخين ما بين الطبقات والإصلاحات والفحص والتتبع.
- تخطيط وتنسيق الفحص وفحوصات NDT واختبارات الضغط والتسرب واختبار المصنع (FAT)، والتحقق من الطرق والتغطية ومعايير القبول ونطاق الكوادر والمعايرة.
- قيادة مراجعة الاحتواء والأثر لحالات عدم المطابقة، وتوجيه قرارات المعالجة إلى الكوادر المفوضة، والتحقق من فعالية الإجراءات التصحيحية.
- تخطيط أو قيادة عمليات تدقيق العمليات والمشاريع والموردين، واستخدام الاتجاهات لاقتراح تحسينات عملية.
- التحكم في حالة القياس والمعايرة، بما في ذلك المعدات خارج التفاوت ومراجعة النتائج المتأثرة بها.
- تحديد معايير اكتمال ملف التسليم والتحقق منها، وتشمل الشهادات والتقارير وبنود الاستكمال (Punch items) لمنع التسليم غير المدعوم بالوثائق.
- توصيل المتطلبات والمخاطر إلى فرق التشغيل والهندسة والموردين والعملاء، والتصعيد بشأن مخاطر الامتثال غير المحسومة، والحفاظ على الحكم المستقل في الجودة.
- تقديم التوجيه ومراجعة أعمال كوادر ضمان الجودة ومراقبة الجودة الأقل خبرة.
الشروط والمتطلبات
- مؤهل هندسي أو مؤهل فني ذو صلة، أو كفاءة موثقة معادلة تناسب المنتج والدور.
- خبرة في ضمان الجودة ومراقبة الجودة بمسؤوليات متدرجة في المجال نفسه أو في مجال قابل للنقل من حيث الصناعة والمنتج والعملية ومرحلة المشروع، مع إثبات الملكية المستقلة على مستوى أول للخطط والقرارات والسجلات.
- تدريب المدققين الداخليين أو مدققين رئيسيين، حيث تكون عمليات التدقيق جزءاً من الدور.
- شهادة API 510 أو 570 أو 653، وذلك فقط عندما تتطلبها الأصول والمهام.
- مؤهل فحص اللحام مثل CSWIP أو AWS CWI، أو مخطط معترف به آخر.
- شهادة NDT خاصة بالطريقة والمستوى (على سبيل المثال EN ISO 9712) لأي مهام NDT يتم تنفيذها أو تفسيرها.
- أي تعيين نظامي أو تعيين من العميل للمفتش، أو تسجيل، أو تخويل متخصص مطلوب للمشروع.
- يتم التحقق من جميع الشهادات لدى الجهة المانحة أو السجل الرسمي، بما يشمل الحالة والنطاق وتاريخ الانتهاء. ينبغي أن يكون المرشح مستعداً لعرض أمثلة من المشاريع وسجلات تثبت مساهمته الشخصية.
المهارات المطلوبة
- معرفة عملية بمواصفات ISO 9001 وISO 19011، إلى جانب الأكواد المطبقة على الدور، مثل ASME BPVC/B31.3 وISO 3834 ومعايير اللحام.
- الإلمام بتوجيه PED 2014/68/EU ومعايير EN عند الاقتضاء.
- الإلمام بمواصفة ISO/IEC 17025 وتتبع القياس، وبالواجهات بين ISO 14001 وISO 45001 وأعمال الموقع.
- القدرة على العمل باستقلالية، وتنسيق الواجهات الفنية، وإدراك المخاطر، والتواصل مع الفرق المختلفة والموردين والعملاء.
عرض النص الأصلي للإعلان
Role overview
We are seeking an experienced Senior QA/QC Engineer to provide independent, evidence-based quality oversight across quality planning, engineering and supplier interfaces, fabrication, inspection, testing, nonconformance control and turnover. You will work independently within delegated authority, coordinate technical interfaces, recognize risk and coach less experienced colleagues.
Key responsibilities
- Build or review project quality plans and ITPs from contract, statutory and customer requirements, setting inspection stages, acceptance criteria, hold/witness points, traceability and records.
- Review specifications, drawings and changes for quality and inspectability; resolve conflicts through documented technical queries.
- Assess supplier quality risk and capability; plan risk-based audits and source inspections; track supplier NCRs to verified closure.
- Control material identification and traceability from receipt to handover, including substitutions and segregation.
- Coordinate welding and fabrication controls: procedures, personnel, consumables, preheat/interpass, repairs, examination and traceability.
- Plan and coordinate inspection, NDT, pressure/leak testing and FAT; check methods, coverage, acceptance criteria, personnel scope and calibration.
- Lead containment and impact review for nonconformances, route dispositions to authorized personnel and verify corrective action effectiveness.
- Plan or lead process, project and supplier audits; use trends to recommend practical improvement.
- Control measurement and calibration status, including out-of-tolerance equipment and affected-result reviews.
- Define and check turnover dossier completion criteria, certificates, reports and punch items to prevent unsupported handover.
- Communicate requirements and risks to operations, engineering, suppliers and clients; escalate unresolved compliance risks and protect independent quality judgment.
- Coach and review the work of junior QA/QC staff.
Required qualifications and experience
- Engineering or relevant technical qualification, or documented equivalent competence appropriate to the product and role.
- Progressively responsible QA/QC experience in the same or a transferable industry, product, process and project phase, with demonstrated senior-level (independent) ownership of plans, decisions and records.
- Working knowledge of ISO 9001 and ISO 19011, plus the codes applicable to the role, such as ASME BPVC/B31.3, ISO 3834 and welding standards, and, where relevant, EU PED 2014/68/EU and EN standards.
- Familiarity with ISO/IEC 17025, measurement traceability, and ISO 14001/ISO 45001 interfaces with site work.
Credentials (as required by the specific duties)
- Internal or lead auditor training, where audits are part of the role.
- API 510, 570 or 653 certification, only where the asset and duties require it.
- Welding inspection qualification such as CSWIP or AWS CWI, or another recognized scheme.
- Method- and level-specific NDT certification (for example EN ISO 9712) for any NDT tasks to be performed or interpreted.
- Any statutory or client inspector appointment, registration or specialist authorization required for the project.
All credentials will be verified with the issuing body or official register, including status, scope and expiry. Candidates should be prepared to present project examples and records that demonstrate their personal contribution.
Authority boundary
Engineering approval, process operation, formal product disposition and final release remain with the designated authorized role holders and the applicable code or regulatory scheme.
رقم الإعلان لدى المصدر: 4490213494