📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة وظائف تناسب سيرتك الذاتيةمجاناً قناة تيليجرام

وظيفة مفتش أنابيب شاغرة لدى WSP in the Middle East في الرياض

Piping Inspector
🕒 نُشرت: (اليوم) 📍 الرياض وظائف الهندسة والتقنية

تفاصيل الوظيفة

تطلب WSP in the Middle East مفتش أنابيب (Piping Inspector) ذا خبرة للعمل في الرياض، المملكة العربية السعودية، لدعم الإشراف على الإنشاء ومراقبة الجودة لأعمال تركيب أنابيب التبريد المناطقي ضمن DCP وشبكة تبريد المناطق وETS ومناطق أنفاق الخدمات. تركز الوظيفة على الإشراف الميداني لضمان تنفيذ الأنابيب والوصلات والصمامات والدعامات واللحام/الوصل والمكونات المرتبطة وفق الرسومات والمواصفات وبيانات الطريقة والمعايير المعتمدة، وذلك ضمن عمل حضوري في الموقع (Onsite).

المهام والمسؤوليات

  • الإشراف على تركيب أنابيب المياه المبردة والأنظمة العملية المرتبطة داخل DCP والشبكة وETS ومناطق أنفاق الخدمات.
  • مراقبة مسارات الأنابيب والتركيب والمحاذاة وجودة التنفيذ مقابل رسومات IFC وP&IDs المعتمدة.
  • فحص الأنابيب والوصلات والصمامات والفلنجات والدعامات والمثبتات والمكونات المرتبطة، والتحقق من مطابقة المواد لطلبات المواد المعتمدة ومواصفات المشروع.
  • مراقبة تركيب دعامات الأنابيب والتزامها بالتفاصيل المعتمدة، ومراقبة تصنيع وتركيب الأنابيب بما يشمل التجهيز واللحام/الوصل.
  • تنسيق الأنشطة الميدانية والتداخلات مع الفرق الميكانيكية والكهربائية وفرق الإنشاء ذات الصلة.
  • تحديد الاختلافات بين ظروف الموقع والرسومات المعتمدة ورفعها فوراً إلى المهندس المسؤول.
  • دعم تطبيق متطلبات QA/QC لأعمال تركيب الأنابيب، وإجراء التفتيشات المرتبطة بـ MIRs وWIRs وتقديم مدخلات فنية للمهندس المسؤول.
  • مراقبة التزام المقاول ببيانات الطريقة المعتمدة وITPs، ومراجعة/التحقق من سجلات تركيب الأنابيب ووثائق اللحام/الوصل ذات الصلة.
  • مراقبة جودة التنفيذ والإبلاغ عن العيوب وحالات التركيب غير المطابقة، والمساعدة في رفع ملاحظات الموقع/NCRs ومتابعة الإجراءات التصحيحية.
  • المشاركة في جولات فحص الأنابيب وتفتيش إنجاز الأعمال الإنشائية، ومتابعة إغلاق بنود punch-list.
  • متابعة تقدم تركيب الأنابيب اليومي وإبلاغ المهندس الميكانيكي/مدير المشروع بالحالة والمشكلات.
  • تنسيق التفتيشات مع المقاول وفريق الإنشاء وفق الأولويات المتفق عليها.
  • تركيز الإشراف على أنشطة تركيب الأنابيب الحرجة ونقاط التوقف والأعمال الحساسة للجودة.
  • دعم التفتيش الدوري والقائم على المخاطر لأنشطة الشبكة المتكررة.
  • حضور اجتماعات التنسيق/الموقع عند الحاجة، والحفاظ على سجلات تفتيش وموقع دقيقة.
  • مراجعة سجلات تركيب الأنابيب والمساهمة في ملفات الإنجاز، والتحقق من mark-ups الإنشائية ودعم مراجعة وثائق as-built.
  • المشاركة في جولات الفحص النهائية للإنشاء، ودعم إغلاق الملاحظات وNCRs وبنود punch-list المعلقة، ومراجعة الأجزاء ذات الصلة بالأنابيب في حزم إغلاق/تسليم الإنشاء.

الشروط والمتطلبات

  • دبلوم أو بكالوريوس في الهندسة الميكانيكية أو هندسة الأنابيب أو تخصص تقني ذي صلة.
  • خبرة من 8 إلى 12 سنة في إنشاء/الإشراف على الأنابيب في مشاريع بنية تحتية كبيرة أو مرافق أو تبريد المناطق أو مياه أو مشاريع صناعية.
  • يفضّل بقوة وجود خبرة في أنابيب المياه المبردة/تبريد المناطق كبيرة القطر والتركيب تحت الأرض أو داخل أنفاق الخدمات.
  • طبيعة العمل: حضوري في الموقع (Onsite).

المهارات المطلوبة

  • معرفة عملية قوية بتركيب الأنابيب والتصنيع واللحام والصمامات والوصلات والدعامات والمثبتات والأنشطة الإنشائية المرتبطة.
  • القدرة على قراءة P&IDs ومخططات الأنابيب ورسومات isometrics وتفاصيل الدعامات ورسومات IFC.
  • الإلمام بتفتيش اللحام وWPS/PQR ووثائق NDT ومتطلبات جودة الأنابيب يعد ميزة إضافية.
عرض النص الأصلي للإعلان
Job Description

We are seeking an experienced Piping Inspector to support construction supervision and quality monitoring of district cooling piping installations within the DCP, district cooling network, ETS and utility tunnel areas.

The role will focus on field supervision of piping installation activities, ensuring that pipework, fittings, valves, supports, welding/jointing and associated installations are completed in accordance with approved drawings, specifications, method statements and applicable standards.

Responsibilities

Piping Construction Supervision

  • Supervise installation of chilled water and associated process piping systems within the DCP, network, ETS and utility tunnel areas.
  • Monitor pipe routing, installation, alignment and workmanship against approved IFC drawings and P&IDs.
  • Inspect piping, fittings, valves, flanges, supports, anchors and associated components.
  • Verify that materials being installed correspond with approved material submissions and project specifications.
  • Monitor pipe support installation and ensure compliance with approved support details.
  • Monitor piping fabrication and erection activities including fit-up, welding/jointing and installation.
  • Coordinate field activities and interfaces with mechanical, electrical and other relevant construction teams.
  • Identify discrepancies between site conditions and approved drawings and promptly escalate them to the responsible Engineer.


Quality Monitoring

  • Support implementation of QA/QC requirements for piping installation works.
  • Conduct inspections associated with MIRs and WIRs and provide technical input to the responsible Engineer.
  • Monitor contractor compliance with approved Method Statements and ITPs.
  • Review/verify piping installation records and applicable welding/jointing documentation.
  • Monitor workmanship and report defects and non-conforming installations.
  • Assist in raising site observations/NCRs and monitor implementation of corrective actions.
  • Participate in piping walkdowns and construction completion inspections.
  • Monitor closure of construction punch-list items.


Progress & Coordination

  • Monitor daily piping construction progress and report status/issues to the responsible Mechanical Engineer/Project Manager.
  • Coordinate inspections with the contractor and construction team based on agreed priorities.
  • Focus supervision on critical piping installation activities, hold points and quality-sensitive works.
  • Support risk-based and periodic inspections for repetitive network activities.
  • Attend construction coordination/site meetings where required.
  • Maintain accurate inspection and site records.


Documentation & Handover

  • Review piping installation records and contribute to completion dossiers.
  • Verify construction mark-ups and support review of as-built piping documentation.
  • Participate in final construction walkdowns.
  • Support closure of outstanding observations, NCRs and punch-list items.
  • Review relevant piping portions of construction close-out/handover packages.


Qualifications

  • Diploma or Bachelor Degree in Mechanical Engineering, Piping Engineering or a related technical discipline.
  • 8-12 years of piping construction/supervision experience on major infrastructure, utility. District cooling, water or industrial projects.
  • Strong hands-on knowledge of piping installation, fabrication, welding valves, fittings, supports, anchors and associated construction activities.
  • Experience with large -diameter chilled water/district cooling piping and underground or utility tunnel installation is strongly preferred.
  • Ability to read P&ID’s, piping layouts, isometrics, support details and IFC drawings.
  • Familiarity with welding inspection, WPS/PQR, NDT documentation and piping quality requirements is advantageous.


Imagine a better future for you and a better future for us all.

Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself?

With us, you can. Apply today.

- Onsite
المصدر: LinkedIn - أُضيفت للموقع في 20 نوفمبر 2026
رقم الإعلان لدى المصدر: 4491950167