وظيفة مهندس كهرباء (DCP) شاغرة لدى WSP in the Middle East في الرياض
تفاصيل الوظيفة
تعلن WSP in the Middle East عن حاجتها إلى مهندس كهرباء ذي خبرة لمشروع DCP، للعمل في مدينة الرياض بالسعودية، وذلك لتقديم الإشراف الإنشائي على الأنظمة الكهربائية وأنظمة التحكم والقياس (C&I) المرتبطة بعملية إنتاج المياه المبردة داخل محطة تبريد المناطق (DCP)، مع تقديم دعم مشترك لتركيبات شبكة تبريد المناطق (DPN) ومحطات نقل الطاقة (ETS). ويتولى المهندس متابعة أعمال التركيب الكهربائي وأنظمة C&I، ومراجعة مقدمات المقاول وطلبات الفحص، والإشراف على متطلبات الجودة، وحضور أنشطة الاختبار والتشغيل التجريبي، ودعم وثائق الإنشاء وأنشطة التسليم. والعمل حضوري في الموقع.
المهام والمسؤوليات
- الإشراف اليومي على التركيبات الكهربائية المرتبطة بمعدات العمليات في محطة DCP.
- متابعة تركيب البنية التحتية الكهربائية وأنظمة التحكم التي تخدم المبردات (Chillers) والمضخات وأبراج التبريد وغيرها من معدات العمليات.
- الإشراف على لوحات LV/MV Switchgear وMCCs والمحولات وVFDs وكابلات الطاقة والتحكم وحوامل الكابلات (Cable Trays) والتأريض والتركيبات الكهربائية المرتبطة، وفق النطاق المعتمد للمشروع.
- التحقق من الأعمال مقابل المخططات أحادية الخط (SLDs) والمخططات الكهربائية وجداول الكابلات ومخططات المعدات ومواصفات المشروع المعتمدة.
- تقديم دعم الإشراف الكهربائي لفرق تركيب شبكة تبريد المناطق (DPN) ومحطات نقل الطاقة (ETS).
- تنسيق الواجهات الكهربائية مع المعدات الميكانيكية/معدات العمليات وأنظمة التحكم.
- الإشراف على تركيب أنظمة التحكم والقياس (C&I) لمعدات العمليات في DCP، بما يشمل لوحات PLC/SCADA/BMS والأجهزة الميدانية وعدادات التدفق/الطاقة وصمامات التحكم وكابلات الأجهزة، والتحقق منها مقابل P&IDs ومخططات الحلقات (Loop Diagrams) وقوائم I/O.
- رصد التعارضات في الموقع وتنسيق الحلول الفنية مع المقاول وفريق المشروع.
- مراجعة Method Statements الخاصة بالمقاول ومقدمات المواد (Material Submittals) والمخططات التنفيذية وإجراءات التركيب.
- مراجعة خطط الفحص والاختبار (ITP) الخاصة بالتركيبات الكهربائية.
- مراجعة مطابقة المعدات والمواد لمواصفات المشروع المعتمدة.
- متابعة تنفيذ الإجراءات المعتمدة أثناء فترة الإنشاء.
- مراقبة تطبيق QA/QC لأنشطة DCP الكهربائية على أساس يومي.
- دعم الفحص الدوري/القائم على المخاطر للأعمال الكهربائية داخل مناطق DPN وETS.
- مراجعة واعتماد طلبات فحص المواد (MIRs) وطلبات فحص الأعمال (WIRs) ذات الصلة.
- رصد الانحرافات وحالات عدم المطابقة ورفع الملاحظات أو تقارير عدم المطابقة (NCRs) حسب الاقتضاء، ومتابعة الإجراءات التصحيحية حتى إغلاقها.
- إعطاء الأولوية لفحص الأنشطة الحرجة ونقاط التوقف (Hold Points) والتركيبات الكهربائية الحساسة للجودة.
- مراجعة إجراءات الاختبار والتشغيل التجريبي الخاصة بالمقاول وحضور اختبارات ما قبل التشغيل والاستلام الميداني والاختبارات الوظيفية لأنظمة الكهرباء وC&I، بما يشمل مقاومة العزل والحماية وفحص الحلقات (Loop Checks) والمعايرة واختبارات التشابك (Interlock) واختبارات PLC/SCADA/BMS.
- تنسيق وحضور بدء تشغيل المعدات وأنشطة التشغيل المتكامل، ومراجعة تقارير الاختبار وسجلات التشغيل التجريبي، ومتابعة بنود قائمة الملاحظات (Punch List) حتى إغلاقها بما يتوافق مع إجراءات السلامة والتغذية الكهربائية.
- العمل عن قرب مع مهندسي الميكانيكا في DCP وDPN ومدير المشروع.
- التنسيق مع العميل والمقاول والاستشاري وممثلي أصحاب المصلحة.
- المشاركة في اجتماعات المشروع/الموقع الأسبوعية عند الحاجة.
- الاحتفاظ بسجلات الفحص الكهربائي والجودة والتقدم.
- تقديم مدخلات لتقارير الإشراف على الإنشاءات الشهرية.
- إبراز أي مشكلات محتملة تتعلق بالجودة أو الواجهات أو البرنامج الزمني لمدير المشروع.
- مراجعة المخططات التنفيذية (As-Built) الكهربائية ووثائق الإغلاق المرتبطة بأنظمة العمليات.
- مراجعة وثائق التسليم ذات الصلة بتركيبات DCP وDPN وETS الكهربائية.
- مراجعة مخططات C&I التنفيذية ومخططات الحلقات وشهادات المعايرة وتقارير الاختبار وسجلات التشغيل التجريبي وأدلة O&M ووثائق التدريب.
- متابعة إغلاق عيوب الإنشاء والفحوصات المعلقة وتقارير عدم المطابقة (NCRs).
- التحقق من استكمال سجلات جودة الإنشاء ذات الصلة.
الشروط والمتطلبات
- بكالوريوس في الهندسة الكهربائية أو تخصص ذي صلة.
- خبرة ذات صلة في الإنشاءات/الهندسة تتراوح عادة بين 10 و15 سنة.
- خبرة قوية في محطات تبريد المناطق أو محطات المرافق المركزية أو المنشآت الصناعية أو البنية التحتية للمياه أو منشآت MEP/العمليات الكبرى.
- خبرة سابقة في تركيبات DCP و/أو ETS تُعد ميزة مرغوبة بشدة.
- الإلمام بمعايير ولوائح IEC وIEEE وBS الكهربائية المحلية المعمول بها.
المهارات المطلوبة
- معرفة جيدة بأنظمة LV/MV وMCCs وVFDs والمحولات وتوزيع الطاقة والكابلات والتأريض والواجهات الكهربائية للمعدات الدوارة/معدات العمليات.
- معرفة جيدة بأنظمة التحكم والقياس (C&I)، بما يشمل PLC/SCADA/BMS والأجهزة الميدانية وحلقات التحكم وI/O وبروتوكولات الاتصال.
- معرفة جيدة بإجراءات QA/QC وMIR/WIR وITP وMethod Statements وعمليات NCR.
- خبرة مثبتة في اختبار وتشغيل أنظمة الكهرباء وC&I، بما يشمل حضور FAT/SAT وفحص الحلقات والمعايرة وبدء تشغيل الأنظمة.
- قدرة قوية على قراءة وتفسير المخططات أحادية الخط (SLDs) والمخططات الكهربائية والرسومات التخطيطية والمواصفات الفنية.
- مهارات قوية في التنسيق الميداني والتواصل وإعداد التقارير.
عرض النص الأصلي للإعلان
We are seeking an experienced DCP Electrical Engineer to provide construction supervision of electrical and control & instrumentation (C&I) systems associated with the chilled water production process within the District Cooling Plant (DCP), with shared support to the District Cooling Network (DPN) and Energy Transfer Station (ETS) installations.
The Engineer will monitor electrical and C&I installation works, review contractor submissions and inspection requests, oversee quality requirements, witness testing and commissioning activities, and support construction documentation and handover activities.
Responsibilities
Construction Supervision
- Provide day-to-day supervision of electrical installations associated with DCP process equipment.
- Monitor installation of electrical power and control infrastructure serving chillers, pumps, cooling towers and other process equipment.
- Supervise applicable LV/MV switchgear, MCCs, transformers, VFDs, power/control cabling, cable trays, earthing and associated electrical installations, according to the project's approved scope.
- Verify works against approved single-line diagrams, electrical layouts, cable schedules, equipment drawings and project specifications.
- Provide electrical construction supervision support to the DPN and ETS installation teams.
- Coordinate electrical interfaces with mechanical/process equipment and control systems.
- Supervise installation of control and instrumentation (C&I) systems for DCP process equipment, including PLC/SCADA/BMS panels, field instruments, flow/energy meters, control valves and instrumentation cabling, and verify against P&IDs, loop diagrams and I/O lists.
- Identify site discrepancies and coordinate technical resolution with the contractor and project team.
- Review relevant contractor method statements, material submittals, shop drawings and installation procedures.
- Review applicable Inspection & Test Plans for electrical installations.
- Review equipment and material compliance against approved project specifications.
- Monitor implementation of approved procedures during construction.
- Monitor QA/QC implementation for DCP electrical activities on a daily basis.
- Support periodic/risk-based inspection of electrical works within DPN and ETS areas.
- Review and sign off applicable MIRs and WIRs.
- Identify deviations/non-conformances and raise observations or NCRs as appropriate.
- Follow up corrective actions through closure.
- Prioritize inspection of critical activities, hold points and quality-sensitive electrical installations.
- Review contractor testing and commissioning procedures and witness pre-commissioning, site acceptance and functional tests of electrical and C&I systems, including insulation resistance, protection, loop checks, calibration, interlock and PLC/SCADA/BMS tests.
- Coordinate and witness equipment start-up and integrated commissioning activities, review test reports and commissioning records, and follow up punch-list items through closure in line with safety and energization procedures.
- Work closely with DCP and DPN Mechanical Engineers and the Project Manager.
- Coordinate with Client, contractor, consultant and stakeholder representatives.
- Participate in weekly project/site meetings where required.
- Maintain electrical inspection, quality and progress records.
- Provide inputs into monthly construction supervision reports.
- Highlight potential quality, interface and programme issues to the Project Manager.
- Review electrical as-built drawings and close-out documentation associated with process systems.
- Review relevant handover documentation for DCP, DPN and ETS electrical installations.
- Review C&I as-built drawings, loop diagrams, calibration certificates, test reports, commissioning records, O&M manuals and training documentation.
- Monitor closure of construction defects, outstanding inspections and NCRs.
- Verify completion of relevant construction quality records.
- Bachelor's degree in Electrical Engineering or related discipline.
- Typically 10-15 years of relevant construction/engineering experience.
- Strong experience in District Cooling Plants, central utility plants, industrial facilities, water infrastructure or major MEP/process facilities.
- Good knowledge of LV/MV systems, MCCs, VFDs, transformers, power distribution, cables, earthing and electrical interfaces for rotating/process equipment.
- Good knowledge of control & instrumentation systems, including PLC/SCADA/BMS, field instruments, control loops, I/O and communication protocols.
- Previous experience with DCP and/or ETS installations is highly desirable.
- Good knowledge of QA/QC procedures, MIR/WIR, ITP, Method Statements and NCR processes.
- Proven experience in testing and commissioning of electrical and C&I systems, including witnessing of FAT/SAT, loop checks, calibration and system start-up.
- Familiarity with applicable IEC, IEEE, BS and local electrical standards/regulations.
- Strong ability to interpret SLDs, electrical layouts, schematics and technical specifications.
- Strong site coordination, communication and reporting skills
Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself?
With us, you can. Apply today.
- Onsite
رقم الإعلان لدى المصدر: 4491934774