شركة نستله تعلن عن وظيفة فني كهرباء وأتمتة في الرياض
Electrical & Automation Technician
🏢 Nestlé
تفاصيل الوظيفة
تعلن شركة نستله عن توفر وظيفة فني كهرباء وأتمتة (مبتدئ) في الرياض، المملكة العربية السعودية، تتضمن المسؤولية اليومية للدعم الكهربائي للمصنع، بالإضافة إلى الصيانة الوقائية والدعم الكهربائي لمشاريع رأس المال والصيانة الاستثنائية.
المهام والمسؤوليات
- تطوير المهارات الكهربائية والتعلم على التقنيات التالية: PLCs مثل Pico, Micro, CompactLogix, SLC500, ControlLogix, Guardlogix وPLC-5؛ Servo's مثل Ultra, Kinetix 5500 و5700؛ الشبكات مثل Ethernet/IP, Sercos, DH-485, DH+ وRemote I/O؛ أجهزة السلامة مثل Guard I/O ومرحلات السلامة؛ المحركات (Drives) من Schneider, ABB, SIEMENS؛ البرمجيات مثل RSLinx, Drive Executive, RSLogix5, RSLogix500, RSLogix5000, PanelBuilder32, FactoryTalk View, Asset Centre, BOOTP-DHCP Server, RSNetworx وجميع برمجيات SIEMENS.
- إتقان مهارات الحاسب الآلي بما في ذلك: برامج الكهرباء، Outlook, Excel, Word, SAP, AutoCAD وSharePoint.
- استخدام أجهزة الاختبار الكهربائية التالية للتوصيل والإعداد والاختبار واستكشاف الأعطال: الملتيميتر (قياس AC/DC للجهد والتيار، الميلي أمبير، الميلي فولت، الأوم، التردد، وقراءات min/max)، ومعدات المعايرة (جهاز اختبار المعايرة، الكتل الجافة، إلخ).
- تنفيذ قائمة الفحص اليومية (بدء التشغيل الكهربائي).
- العمل ضمن فرق صغيرة على إزالة وتركيب المعدات.
- الحفاظ على علاقة عمل وثيقة مع مشغلي المعدات وقادة خطوط الإنتاج.
- الامتثال لجميع قواعد وسياسات المصنع بما في ذلك السلامة ولوائح GMP وممارسات التدبير المنزلي الجيدة.
- التعاون مع فنيي الصيانة الآخرين لرفع مستوى مهاراتهم الكهربائية.
- تحسين تكاليف صيانة وتشغيل الأنظمة الكهربائية وأنظمة التحكم في العمليات.
- تحسين الأجهزة والبرمجيات الخاصة بأنظمة التحكم الكهربائي والعمليات للحفاظ على كفاءة المصنع وجودته وسلامته بمستوى عالٍ.
- الحفاظ على التواصل مع الإدارات والمنشآت الأخرى لتقديم الدعم والمساعدة اللازمة لتنفيذ مشاريع رأس المال والمبادرات العالمية والسوقية.
- القيام باستكشاف الأعطال عند حدوث مشاكل، وضمان صيانة تطبيقات PLC وHMI وMES بشكل صحيح.
- صيانة التطبيقات الصناعية والأجهزة في طبقة الأتمتة.
- الالتزام الصارم بسياسات وإجراءات إدارة التغيير الخاصة بـ PLC وHMI.
- الحفاظ على موثوقية وأداء البنية التحتية لتقنية المعلومات لنظام FAS وشبكات الند للند.
- التنسيق الوثيق مع الإدارات الأخرى مثل الجودة والسلامة والعمليات والإنتاج، مع التركيز على QMS وHAACP والمعايرة.
- القدرة على العمل ضمن بيئة فريق مع جميع الإدارات والرغبة في التعلم.
الشروط والمتطلبات
- درجة الزمالة في مجال تقني كهربائي صناعي مثل تكنولوجيا أنظمة الأتمتة أو الكهرباء الصناعية.
- فهم أساسيات استكشاف الأعطال ومهارات اتصال كتابية وشفوية قوية، مع القدرة على تفسير وفهم الأدبيات التقنية والمطبوعات الوثائقية.
- معرفة عملية بلوحات التوزيع الرئيسية (Switchboards) ومراكز التحكم بالمحركات (MCCs) ولوحات التحكم وخزانات التحكم.
- القدرة على قراءة وتفسير المستندات مثل قواعد السلامة وتعليمات التشغيل والصيانة وأدلة الإجراءات.
- القدرة على كتابة التقارير والمراسلات الروتينية.
- المهارات الرياضية: القدرة على الجمع والطرح والضرب والقسمة بجميع وحدات القياس باستخدام الأعداد الصحيحة والكسور والأعداد العشرية، وحساب النسبة والتناسب والنسبة المئوية، ورسم وتفسير الرسوم البيانية الشريطية.
- القدرة على حل المشكلات العملية والتعامل مع مجموعة متنوعة من المتغيرات الملموسة في الحالات التي يكون فيها التوحيد محدودًا، وتفسير التعليمات المختلفة المقدمة في شكل نص مكتوب أو شفهي أو رسوم بيانية أو جداول.
المهارات المطلوبة
- إتقان العمل على PLCs: Pico, Micro, CompactLogix, SLC500, ControlLogix, Guardlogix وPLC-5.
- إتقان العمل على Servo's: Ultra, Kinetix 5500 و5700، والقدرة على التعامل مع جميع الأنواع الأخرى.
- معرفة الشبكات: Ethernet/IP, Sercos, DH-485, DH+ وRemote I/O.
- معرفة أجهزة السلامة: Guard I/O ومرحلات السلامة.
- معرفة المحركات (Drives): Schneider, ABB, SIEMENS.
- إتقان البرمجيات: RSLinx, Drive Executive, RSLogix5, RSLogix500, RSLogix5000, PanelBuilder32, FactoryTalk View, Asset Centre, BOOTP-DHCP Server, RSNetworx وجميع برمجيات SIEMENS.
- مهارات الحاسب الآلي: برامج الكهرباء، Outlook, Excel, Word, SAP, AutoCAD وSharePoint.
- مهارات استخدام أجهزة الاختبار الكهربائية: الملتيميتر وأجهزة المعايرة.
عرض النص الأصلي للإعلان
Position Summary
The Electrical and Automation Entry Level Technician is responsible for the daily electrical support for the factory. Additional duties include preventative maintenance and electrical support for capital and extraordinary maintenance projects. The position requires good communication skills and teamwork with all departments. Individuals will need strong time management skills, be self-motivated and able to complete in-plant electrical projects/repairs with minimal assistance. Also utilize equipment logs and reports, and data from computerized maintenance systems to track equipment reliability and manage time. This position would work directly with an experienced E&A Technician as a mentor to guide thru onboarding.
Responsibilities:
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form.
The Electrical and Automation Entry Level Technician is responsible for the daily electrical support for the factory. Additional duties include preventative maintenance and electrical support for capital and extraordinary maintenance projects. The position requires good communication skills and teamwork with all departments. Individuals will need strong time management skills, be self-motivated and able to complete in-plant electrical projects/repairs with minimal assistance. Also utilize equipment logs and reports, and data from computerized maintenance systems to track equipment reliability and manage time. This position would work directly with an experienced E&A Technician as a mentor to guide thru onboarding.
Responsibilities:
- Electrical skills or ability to learn on the following technologies:
- PLCs: Pico, Micro, CompactLogix, SLC500, ControlLogix, Guardlogix & PLC-5
- Servo's: Ultra, Kinetix 5500 and 5700 and capable to deal with all other types.
- Networks: Ethernet /IP, Sercos, DH-485, DH+ and Remote I/O
- Safety devices: Guard I/O, Safety relays
- Drives: Schneider, ABB, SIEMENS
- Software: RSLinx, Drive Executive, RSLogix5, RSLogix500, RSLogix5000, PanelBuilder32, FactoryTalk View, Asset Centre, BOOTP-DHCP Server, RSNetworx AND All SIEMNESE type softwares.
- Computer Skills including familiarity with: Electrical Software, Outlook, Excel, Word, SAP, Auto CAD, and SharePoint
- Skills on the following electrical testing devices to connect, set-up, and perform testing to troubleshoot plant issues
- Multimeters: AC, DC voltage and amperage, milliamp, millivolt, OHM's, frequency, and min/max readings
- Calibration equipment: Calibration tester, dry blocks, etc.
- Daily checklist (start-up Electrical)
- Work on small teams on removal and installation of equipment
- Maintain close working relationship with equipment operators and line team leaders
- Abide by all plant rules/policies including safety, GMP regulations and perform good housekeeping practices
- Working with the other maintenance techs to increase their electrical skills
- Optimize electrical/process control maintenance and operation costs
- Optimize electrical/process control hardware and software to maintain plant at high level of efficiency, safety, quality, etc.
- Maintain liaisons with other departments, disciplines, and facilities to provide necessary support and expertise for the execution of capital investment projects and market and global initiatives.
- Perform troubleshooting in case of problems and ensure the PLC, HMI and MES applications are properly maintained
- Maintain industrial applications and hardware in the automation layer
- Strictly adhere to PLC and HMI change management policy/procedures
- Maintain the reliability and the performance of the FAS IT infrastructure and peer to peer networks
- Closely coordinate with other functions, such as quality, safety, operations and production, with special emphasis on QMS, HAACP and calibration
- Must be able to work in a team-based environment with all departments
- Desire to learn
- Associate Degree in an Industrial Electrical technical field such as Automation Systems Technology, Electrical Industrial.
- Understands troubleshooting; Strong written and oral communication skills with the ability to interpret and comprehend technical literature and print documentation
- Working knowledge of switchboards, MCCs, panel boards, control cabinets
- Ability to read and interpret documents such as safety rules, operation and maintenance instructions, and procedure manuals.
- Ability to write routine reports and correspondence.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form.
المصدر: LinkedIn - أُضيفت للموقع في 9 أغسطس 2026
وظائف أخرى لدى Nestlé