📍 المملكة العربية السعودية تحديث مستمر على مدار الساعة

شركة Parsons Corporation تعلن عن وظيفة أخصائي جودة مشاريع - المرافق الرطبة (مواطن سعودي) في الرياض

Project Quality Specialist - Wet Utilities (Saudi National)
🏢 Parsons Corporation
🕒 نُشرت: (أمس) 📍 الرياض وظائف الهندسة والتقنية
التقديم على الوظيفة من المصدر الرسمي ↗

تفاصيل الوظيفة

شركة Parsons Corporation تبحث عن متخصص في الجودة لمشاريع المرافق الرطبة (Project Quality Specialist - Wet Utilities) للعمل في الرياض، المملكة العربية السعودية.

المهام والمسؤوليات

  • دعم تنفيذ متطلبات الجودة لأعمال المرافق الرطبة.
  • مراقبة أنشطة الإنشاء لضمان الامتثال للرسومات والمواصفات المعتمدة وطرق التنفيذ وخطط التفتيش.
  • إجراء التفتيش والمراقبة على أنشطة تركيب المرافق الرطبة.
  • مراجعة ومراقبة خطط التفتيش والقوائم وإجراءات التفتيش ومتطلبات الاختبار الخاصة بالمرافق الرطبة.
  • مراجعة طلبات فحص المواد وفحص العمل وتقارير الاختبار وشهادات المواد والوثائق الفنية.
  • التحقق من تخزين ومعالجة وتركيب المواد المعتمدة مثل الأنابيب والتجهيزات والصمامات والغرف والمعدات بشكل صحيح.
  • مراقبة أداء الجودة للمقاول والمقاولين من الباطن في أعمال المرافق الرطبة.
  • تحديد العيوب وعدم المطابقة ومخاطر الجودة في مرحلة مبكرة.
  • رفع ومراجعة ومراقبة تقارير عدم المطابقة والملاحظات المتعلقة بالمرافق الرطبة.
  • دعم تحليل الأسباب الجذرية وتنفيذ الإجراءات التصحيحية والوقائية.
  • التحقق من الإجراءات التصحيحية والأدلة الداعمة قبل إغلاق تقرير عدم المطابقة.
  • مراقبة سجلات الجودة وضمان تتبع عمليات التفتيش والاختبار.
  • المشاركة في عمليات تدقيق الجودة والتفتيش والاجتماعات الفنية وورش التنسيق.
  • دعم التحقيق في مشاكل الجودة الفنية وحلها.
  • التنسيق مع فرق الهندسة والإنشاء لحل مشاكل الجودة.
  • دعم إعداد تقارير الجودة الأسبوعية والشهرية.
  • مراقبة اتجاهات الجودة والعيوب المتكررة والتوصية بإجراءات التحسين.
  • دعم اختبار وتشغيل والتسليم النهائي لأنظمة المرافق الرطبة.
  • الإشراف على جودة أنظمة المرافق الرطبة بما في ذلك شبكات المياه والري والصرف الصحي والمياه السطحية ومحطات الضخ والخزانات والصمامات والغرف والمصائد والقنوات والمجاري والمخرجات وأنظمة القياس ومحطات تخفيض الضغط.
  • مراقبة تركيب الأنابيب والتجهيزات والصمامات والغرف والمحطات والمناهيل والهياكل المرتبطة بها.
  • التحقق من محاذاة الأنابيب ومستوياتها وانحداراتها وأعماقها وفقاً للرسومات المعتمدة.
  • مراقبة تجهيز قاع الأنبوب والردم والدمك.
  • التنسيق مع فرق المساحة للتحقق من المواقع والمستويات النهائية.
  • مراجعة ومراقبة إجراءات الاختبار والتشغيل المعتمدة للمرافق الرطبة.
  • الإشراف على اختبارات الضغط الهيدروستاتيكي والكشف عن التسرب وتنظيف وتعقيم أنظمة المياه.
  • مراقبة اختبارات شبكات الصرف الصحي بما في ذلك فحص الكاميرات.
  • التحقق من تشغيل الصمامات والمضخات والعدادات وأنظمة التحكم.
  • مراجعة نتائج الاختبار والتحقق من الامتثال لمعايير القبول.
  • التنسيق مع مهندسي المرافق الرطبة لضمان تضمين متطلبات الجودة في أنشطة الإنشاء.
  • مراقبة واجهات المرافق الرطبة مع الأعمال المدنية والطرق والهيكلية والميكانيكية والكهربائية والمناظر الطبيعية.
  • دعم تنسيق نمذجة معلومات البناء للمرافق الرطبة.
  • الإشراف على جودة البنية التحتية للمرافق الرطبة في مطار ومرافقه المدرجات والممرات والمناطق الخارجية.
  • مراقبة أعمال المرافق الرطبة في البيئات الجوية والبرية.
  • إدارة تقارير عدم المطابقة والملاحظات المتعلقة بالمرافق الرطبة.
  • دعم تحديد الأسباب الجذرية لعيوب التركيب والتسرب وفشل اختبارات الضغط ومشاكل الصرف.

الشروط والمتطلبات

  • أن يكون المتقدم سعودي الجنسية (Saudi National).
عرض النص الأصلي للإعلان
In a world of possibilities, pursue one with endless opportunities. Imagine Next!

At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.

Job Description

Parsons is looking for an amazingly talented Project Quality Specialist Wet Utilities to join our team!

What You’ll Be Doing

  • Support implementation of project quality requirements for wet utility works.
  • Monitor construction activities to ensure compliance with approved drawings, specifications, Method Statements, and ITPs.
  • Conduct quality inspections and surveillance of wet utility installation activities.
  • Review and monitor wet utility-related ITPs, checklists, inspection procedures, and testing requirements.
  • Review Material Inspection Requests (MIRs), Work Inspection Requests (WIRs), test reports, material certificates, and technical documentation.
  • Verify that approved materials, pipes, fittings, valves, chambers, and equipment are properly stored, handled, and installed.
  • Monitor Contractor and Subcontractor quality performance for wet utility works.
  • Identify defects, non-conformances, and quality risks at an early stage.
  • Raise, review, and monitor NCRs and quality observations related to wet utilities.
  • Support root cause analysis and corrective / preventive action implementation.
  • Verify corrective actions and supporting evidence prior to NCR closure.
  • Monitor quality records and ensure proper traceability of inspections and tests.
  • Participate in quality audits, inspections, technical meetings, and coordination workshops.
  • Support investigation and resolution of technical quality issues.
  • Coordinate with Engineering and Construction teams to resolve quality-related issues.
  • Support preparation of weekly and monthly quality reports.
  • Monitor quality trends and recurring defects and recommend improvement measures.
  • Support testing, commissioning, and final handover of wet utility systems.


Wet Utilities Quality Responsibilities

The role will provide quality oversight for wet utility systems including, as applicable:

  • Potable Water Networks
  • Domestic Water Networks
  • Irrigation Networks
  • Fire Water Networks
  • Sewerage Networks
  • Stormwater Drainage
  • Surface Water Drainage
  • Wastewater Networks
  • Pumping Stations
  • Sewage Pump Stations
  • Water Storage Tanks
  • Fire Water Tanks
  • Irrigation Tanks
  • Water Treatment Systems
  • Valves & Valve Chambers
  • Manholes & Inspection Chambers
  • Catch Basins & Gullies
  • Drainage Channels
  • Culverts
  • Outfalls
  • Water Metering Systems
  • Pressure Reducing Stations
  • Associated Pipework, Fittings, Sleeves, and Connections


Installation Quality Control

  • Inspect installation of underground and above-ground wet utility networks.
  • Verify pipe alignment, levels, gradients, depths, and routing against approved drawings.
  • Monitor installation of pipes, fittings, valves, chambers, manholes, and associated infrastructure.
  • Verify pipe bedding, surround, backfilling, and compaction requirements.
  • Monitor construction of concrete chambers, manholes, valve chambers, catch basins, and drainage structures.
  • Verify pipe joints, connections, fittings, thrust blocks, anchors, and supports.
  • Monitor installation of water, sewerage, drainage, irrigation, and fire water networks.
  • Coordinate inspections prior to backfilling and closure of concealed works.
  • Verify separation distances and protection requirements between wet utilities and other underground services.
  • Monitor crossings and interfaces with roads, structures, electrical utilities, ICT, and other infrastructure.
  • Verify installation of sleeves, penetrations, waterproofing, and utility protection systems.
  • Coordinate with Survey teams to verify final utility locations, levels, and coordinates.
  • Verify as-built information before completion and handover.


Testing & Commissioning

  • Review and monitor approved wet utility testing and commissioning procedures.
  • Coordinate testing activities with Contractors, Commissioning teams, Consultants, and Client representatives.
  • Monitor hydrostatic and pressure testing of water and fire water networks.
  • Monitor leakage testing and pressure testing of pipelines.
  • Verify flushing, cleaning, and disinfection of potable water systems where applicable.
  • Monitor testing of sewerage and drainage networks, including CCTV inspection where required.
  • Verify gravity pipeline testing, infiltration / exfiltration testing, and air testing where applicable.
  • Monitor flow testing and functional testing of pumping systems.
  • Verify operation of valves, pumps, meters, control systems, and associated equipment.
  • Review test results and verify compliance with approved acceptance criteria.
  • Ensure failed tests are properly investigated and corrective actions implemented.
  • Maintain complete testing and commissioning quality records.
  • Support final inspection and system handover.


Engineering & Interface Coordination

  • Coordinate with Wet Utilities Engineers to ensure quality requirements are incorporated into construction activities.
  • Review approved utility drawings, profiles, details, specifications, and design changes.
  • Coordinate wet utility interfaces with Civil, Roads, Drainage, Structural, MEP, Landscape, Electrical, and ICT works.
  • Monitor utility corridors and shared infrastructure for coordination and constructability issues.
  • Coordinate with Survey teams to verify utility alignments, coordinates, levels, and gradients.
  • Support BIM coordination and verification of utility models where applicable.
  • Ensure construction teams are working to the latest approved drawings and revisions.
  • Support resolution of RFIs, Technical Queries, and quality-related design clarifications.
  • Monitor interfaces with existing live utility networks and tie-in works.


Airport / Infrastructure & Airfield Responsibilities

  • Provide quality oversight for wet utility infrastructure serving airport terminals, airfield facilities, roads, aprons, taxiways, runways, and external areas.
  • Monitor wet utility works within airside and landside environments.
  • Support quality control of critical potable water, fire water, sewerage, drainage, irrigation, and stormwater systems.
  • Coordinate wet utility quality requirements with airport operational and access constraints.
  • Monitor interfaces with existing live water, sewerage, drainage, and fire protection networks.
  • Support quality inspections for phased construction and complex utility tie-ins.
  • Ensure wet utility works comply with Client, Consultant, authority, airport, and project-specific requirements.


NCR & Quality Issue Management

  • Review and monitor wet utility-related NCRs and quality observations.
  • Support identification of root causes for installation defects, leakage, failed pressure tests, and drainage issues.
  • Coordinate corrective actions with Contractors and Construction teams.
  • Verify rectification works and supporting evidence.
  • Track recurring issues and recommend preventive measures.
  • Maintain wet utility quality registers and action trackers.


Quality Audits & Reporting

  • Support quality audits and surveillance inspections for wet utility Contractors and Subcontractors.
  • Monitor compliance with project quality procedures and ISO 9001 principles.
  • Prepare inspection reports and quality observations.
  • Track quality performance and corrective action closure.
  • Prepare weekly and monthly quality reports.
  • Monitor key quality indicators including:
    • NCRs
    • Quality Observations
    • Inspection Pass Rate
    • Test Failures
    • Leakage / Pressure Test Failures
    • Material Rejections
    • Rework
    • Audit Findings
    • Corrective Action Closure
  • Highlight recurring quality issues and potential risks to Project Quality Management.

What Required Skills You’ll Bring

  • Bachelor's Degree in Civil Engineering, Water / Environmental Engineering, Mechanical Engineering, or a related discipline.
  • Minimum 5 years of relevant experience in quality assurance / quality control for wet utilities, water, wastewater, drainage, irrigation, or infrastructure projects.
  • Experience on major airport, infrastructure, transportation, or multidisciplinary construction projects is preferred.
  • Strong understanding of wet utility installation, inspection, testing, and commissioning.
  • Experience with water supply, sewerage, stormwater, drainage, fire water, irrigation, pumping stations, and underground utility networks.
  • Good knowledge of ITPs, Method Statements, MIRs, WIRs, NCRs, inspection procedures, and testing documentation.
  • Experience with pressure testing, hydrostatic testing, leakage testing, flushing, disinfection, and drainage testing.
  • Experience working with Contractors, Subcontractors, Consultants, and Client representatives.
  • Good understanding of applicable utility, water, drainage, and infrastructure standards.
  • Knowledge of ISO 9001 quality management principles.
  • Quality certification such as ISO 9001, CQI, or equivalent is an advantage.
  • Strong communication, coordination, reporting, and problem-solving skills.


What Desired Skills You’ll Bring

  • Wet Utilities Quality Management
  • Water Supply Quality
  • Sewerage Quality
  • Stormwater & Drainage Quality
  • Fire Water Quality
  • Irrigation Quality
  • Pumping Station Quality
  • Pipeline Installation
  • Pipe Pressure & Leakage Testing
  • ITP Management
  • Material Inspection
  • Inspection & Testing
  • NCR Management
  • Corrective & Preventive Actions
  • Quality Auditing
  • Contractor Quality Management
  • Utility Interface Coordination
  • Technical Documentation
  • Quality Reporting
  • Airport / Infrastructure Quality
  • Problem Solving
  • Stakeholder Coordination


Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.

We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY!

Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.
المصدر: LinkedIn - أُضيفت للموقع في 18 أغسطس 2026

وظائف أخرى لدى Parsons Corporation