بارسونز تعلن عن وظيفة أخصائي جودة المشروع - المرافق الرطبة (سعودي الجنسية) في الرياض
تفاصيل الوظيفة
بارسونز تبحث عن Project Quality Specialist - Wet Utilities (سعودي الجنسية) للعمل في الرياض.
المهام والمسؤوليات
- دعم تطبيق متطلبات الجودة لأعمال المرافق الرطبة (Wet Utilities).
- مراقبة أنشطة البناء للتأكد من مطابقتها للمخططات والمواصفات وطرق التنفيذ وخطط التفتيش (ITP).
- إجراء التفتيش والمراقبة الميدانية لأعمال تركيب المرافق الرطبة.
- مراجعة ومراقبة ITPs وقوائم التفتيش وإجراءات الاختبار الخاصة بالمرافق الرطبة.
- مراجعة طلبات فحص المواد (MIR) وطلبات فحص الأعمال (WIR) وتقارير الاختبار والشهادات الفنية.
- التحقق من تخزين ومناولة وتركيب المواد المعتمدة (مواسير، محابس، صمامات، غرف، معدات).
- مراقبة أداء الجودة لدى المقاولين والمقاولين من الباطن لأعمال المرافق الرطبة.
- رصد العيوب وعدم المطابقة ومخاطر الجودة في مرحلة مبكرة.
- إصدار ومتابعة تقارير عدم المطابقة (NCR) والملاحظات الجودة المتعلقة بالمرافق الرطبة.
- دعم تحليل الأسباب الجذرية وتنفيذ الإجراءات التصحيحية والوقائية.
- التحقق من الإجراءات التصحيحية والأدلة الداعمة قبل إغلاق NCR.
- مراقبة سجلات الجودة وضمان إمكانية تتبع عمليات التفتيش والاختبار.
- المشاركة في تدقيقات الجودة والتفتيش والاجتماعات الفنية وورش التنسيق.
- دعم التحقيق في مشكلات الجودة الفنية وحلها.
- التنسيق مع فرق الهندسة والبناء لحل القضايا المتعلقة بالجودة.
- دعم إعداد تقارير الجودة الأسبوعية والشهرية.
- مراقبة اتجاهات الجودة والعيوب المتكررة والتوصية بإجراءات تحسينية.
- دعم اختبار وتشغيل والتسليم النهائي لأنظمة المرافق الرطبة.
- تقديم الإشراف على الجودة لأنظمة: شبكات المياه الصالحة للشرب، مياه الري، مياه الإطفاء، الصرف الصحي، تصريف مياه الأمطار، المياه السطحية، محطات الضخ، خزانات المياه، خزانات مياه الإطفاء، خزانات الري، أنظمة معالجة المياه، غرف المحابس، غرف التفتيش، أحواض التجميع، قنوات الصرف، العبارات، المصبات، أنظمة عدادات المياه، محطات تخفيض الضغط، والوصلات والمواسير المرتبطة.
- التفتيش على تركيب شبكات المرافق الرطبة تحت الأرض وفوق الأرض، والتحقق من المحاذاة والمناسيب والميول والأعماق حسب المخططات.
- مراقبة تركيب المواسير والوصلات والمحابس والغرف والمنهولات والبنية التحتية المرتبطة.
- التحقق من طبقة التأسيس والردم والدمك حسب المتطلبات.
- مراقبة إنشاء الغرف الخرسانية والمنهولات وغرف المحابس وأحواض التجميع ومنشآت الصرف.
- التحقق من وصلات المواسير والتثبيتات (thrust blocks) والمثبتات والدعامات.
- التنسيق للتفتيش قبل الردم وإغلاق الأعمال المخفية.
- التحقق من مسافات الفصل وحماية المرافق الرطبة مع الخدمات الأخرى تحت الأرض.
- مراقبة التقاطعات مع الطرق والمنشآت والمرافق الكهربائية وتقنية المعلومات والبنية التحتية الأخرى.
- التحقق من تركيب الأكمام والاختراقات والعزل المائي وأنظمة حماية المرافق.
- التنسيق مع فرق المساحة للتحقق من المواقع والمناسيب والإحداثيات النهائية للمرافق.
- التحقق من معلومات "كما بني" (As-Built) قبل الإنجاز والتسليم.
- مراجعة ومراقبة إجراءات الاختبار والتشغيل المعتمدة للمرافق الرطبة.
- التنسيق لأنشطة الاختبار مع المقاولين وفرق التشغيل والاستشاريين وممثلي العميل.
- مراقبة الاختبار الهيدروستاتيكي واختبار الضغط لشبكات المياه ومياه الإطفاء.
- مراقبة اختبار التسرب واختبار الضغط لخطوط الأنابيب.
- التحقق من عمليات الغسل والتنظيف والتعقيم لأنظمة المياه الصالحة للشرب عند الحاجة.
- مراقبة اختبار شبكات الصرف الصحي والتصريف بما في ذلك فحص CCTV عند الطلب.
- التحقق من اختبار خطوط الجاذبية واختبار التسلل/الانسياب واختبار الهواء عند الحاجة.
- مراقبة اختبار التدفق والاختبار الوظيفي لأنظمة الضخ.
- التحقق من تشغيل المحابس والمضخات والعدادات وأنظمة التحكم والمعدات المرتبطة.
- مراجعة نتائج الاختبار والتحقق من مطابقتها لمعايير القبول المعتمدة.
- ضمان التحقيق في الاختبارات الفاشلة وتنفيذ الإجراءات التصحيحية.
- الحفاظ على سجلات جودة كاملة للاختبار والتشغيل.
- دعم الفحص النهائي وتسليم الأنظمة.
- التنسيق مع مهندسي المرافق الرطبة لدمج متطلبات الجودة في أنشطة البناء.
- مراجعة المخططات والتفاصيل والمواصفات وتغييرات التصميم المعتمدة.
- التنسيق بشأن تداخلات المرافق الرطبة مع أعمال الهندسة المدنية والطرق والصرف والمنشآت وMEP والمناظر الطبيعية والكهرباء وتقنية المعلومات.
- مراقبة ممرات المرافق والبنية التحتية المشتركة من حيث التنسيق وقابلية التنفيذ.
- التنسيق مع فرق المساحة للتحقق من محاذاة المرافق وإحداثياتها ومناسيبها وميولها.
- دعم التنسيق النموذجي للمعلومات (BIM) والتحقق من نماذج المرافق عند الحاجة.
- ضمان عمل فرق البناء بأحدث المخططات والمراجعات المعتمدة.
- دعم حل طلبات المعلومات (RFI) والاستفسارات الفنية والتوضيحات التصميمية المتعلقة بالجودة.
- مراقبة التداخلات مع شبكات المرافق الحالية القائمة وأعمال الربط.
- تقديم الإشراف على الجودة للمرافق الرطبة التي تخدم مباني المطار وساحات الطائرات والطرق والأرصفة والممرات والمدارج والمناطق الخارجية.
- مراقبة أعمال المرافق الرطبة في المناطق الجوية (airside) والبرية (landside).
- دعم مراقبة جودة أنظمة المياه الحيوية (الشرب، الإطفاء، الصرف الصحي، الري، مياه الأمطار).
- التنسيق بشأن متطلبات جودة المرافق الرطبة مع قيود تشغيل المطار والوصول.
- مراقبة التداخلات مع شبكات المياه والصرف الصحي والتصريف والإطفاء الحالية.
- دعم التفتيش الجودة للبناء المرحلي ووصلات المرافق المعقدة.
- ضمان امتثال أعمال المرافق الرطبة لمتطلبات العميل والاستشاري والجهات المختصة والمطار والمشروع.
- مراجعة ومراقبة NCRs والملاحظات الجودة المتعلقة بالمرافق الرطبة.
- دعم تحديد الأسباب الجذرية لعيوب التركيب والتسرب وفشل اختبارات الضغط ومشكلات الصرف.
- التنسيق للإجراءات التصحيحية مع فرق البناء والمقاولين.
- التحقق من أعمال التصحيح والأدلة الداعمة قبل إغلاق NCR.
عرض النص الأصلي للإعلان
At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.
Job Description:
Parsons is looking for an amazingly talented Project Quality Specialist Wet Utilities to join our team!
What You’ll Be Doing
Support implementation of project quality requirements for wet utility works.
Monitor construction activities to ensure compliance with approved drawings, specifications, Method Statements, and ITPs.
Conduct quality inspections and surveillance of wet utility installation activities.
Review and monitor wet utility-related ITPs, checklists, inspection procedures, and testing requirements.
Review Material Inspection Requests (MIRs), Work Inspection Requests (WIRs), test reports, material certificates, and technical documentation.
Verify that approved materials, pipes, fittings, valves, chambers, and equipment are properly stored, handled, and installed.
Monitor Contractor and Subcontractor quality performance for wet utility works.
Identify defects, non-conformances, and quality risks at an early stage.
Raise, review, and monitor NCRs and quality observations related to wet utilities.
Support root cause analysis and corrective / preventive action implementation.
Verify corrective actions and supporting evidence prior to NCR closure.
Monitor quality records and ensure proper traceability of inspections and tests.
Participate in quality audits, inspections, technical meetings, and coordination workshops.
Support investigation and resolution of technical quality issues.
Coordinate with Engineering and Construction teams to resolve quality-related issues.
Support preparation of weekly and monthly quality reports.
Monitor quality trends and recurring defects and recommend improvement measures.
Support testing, commissioning, and final handover of wet utility systems.
Wet Utilities Quality Responsibilities
The role will provide quality oversight for wet utility systems including, as applicable:
Potable Water Networks
Domestic Water Networks
Irrigation Networks
Fire Water Networks
Sewerage Networks
Stormwater Drainage
Surface Water Drainage
Wastewater Networks
Pumping Stations
Sewage Pump Stations
Water Storage Tanks
Fire Water Tanks
Irrigation Tanks
Water Treatment Systems
Valves & Valve Chambers
Manholes & Inspection Chambers
Catch Basins & Gullies
Drainage Channels
Culverts
Outfalls
Water Metering Systems
Pressure Reducing Stations
Associated Pipework, Fittings, Sleeves, and Connections
Installation Quality Control
Inspect installation of underground and above-ground wet utility networks.
Verify pipe alignment, levels, gradients, depths, and routing against approved drawings.
Monitor installation of pipes, fittings, valves, chambers, manholes, and associated infrastructure.
Verify pipe bedding, surround, backfilling, and compaction requirements.
Monitor construction of concrete chambers, manholes, valve chambers, catch basins, and drainage structures.
Verify pipe joints, connections, fittings, thrust blocks, anchors, and supports.
Monitor installation of water, sewerage, drainage, irrigation, and fire water networks.
Coordinate inspections prior to backfilling and closure of concealed works.
Verify separation distances and protection requirements between wet utilities and other underground services.
Monitor crossings and interfaces with roads, structures, electrical utilities, ICT, and other infrastructure.
Verify installation of sleeves, penetrations, waterproofing, and utility protection systems.
Coordinate with Survey teams to verify final utility locations, levels, and coordinates.
Verify as-built information before completion and handover.
Testing & Commissioning
Review and monitor approved wet utility testing and commissioning procedures.
Coordinate testing activities with Contractors, Commissioning teams, Consultants, and Client representatives.
Monitor hydrostatic and pressure testing of water and fire water networks.
Monitor leakage testing and pressure testing of pipelines.
Verify flushing, cleaning, and disinfection of potable water systems where applicable.
Monitor testing of sewerage and drainage networks, including CCTV inspection where required.
Verify gravity pipeline testing, infiltration / exfiltration testing, and air testing where applicable.
Monitor flow testing and functional testing of pumping systems.
Verify operation of valves, pumps, meters, control systems, and associated equipment.
Review test results and verify compliance with approved acceptance criteria.
Ensure failed tests are properly investigated and corrective actions implemented.
Maintain complete testing and commissioning quality records.
Support final inspection and system handover.
Engineering & Interface Coordination
Coordinate with Wet Utilities Engineers to ensure quality requirements are incorporated into construction activities.
Review approved utility drawings, profiles, details, specifications, and design changes.
Coordinate wet utility interfaces with Civil, Roads, Drainage, Structural, MEP, Landscape, Electrical, and ICT works.
Monitor utility corridors and shared infrastructure for coordination and constructability issues.
Coordinate with Survey teams to verify utility alignments, coordinates, levels, and gradients.
Support BIM coordination and verification of utility models where applicable.
Ensure construction teams are working to the latest approved drawings and revisions.
Support resolution of RFIs, Technical Queries, and quality-related design clarifications.
Monitor interfaces with existing live utility networks and tie-in works.
Airport / Infrastructure & Airfield Responsibilities
Provide quality oversight for wet utility infrastructure serving airport terminals, airfield facilities, roads, aprons, taxiways, runways, and external areas.
Monitor wet utility works within airside and landside environments.
Support quality control of critical potable water, fire water, sewerage, drainage, irrigation, and stormwater systems.
Coordinate wet utility quality requirements with airport operational and access constraints.
Monitor interfaces with existing live water, sewerage, drainage, and fire protection networks.
Support quality inspections for phased construction and complex utility tie-ins.
Ensure wet utility works comply with Client, Consultant, authority, airport, and project-specific requirements.
NCR & Quality Issue Management
Review and monitor wet utility-related NCRs and quality observations.
Support identification of root causes for installation defects, leakage, failed pressure tests, and drainage issues.
Coordinate corrective actions with Contractors and Construction teams.
Verify rectification works and supporting evidence.
Track recurring issues and recommend preventive measures.
Maintain wet utility quality registers and action trackers.
Quality Audits & Reporting
Support quality audits and surveillance inspections for wet utility Contractors and Subcontractors.
Monitor compliance with project quality procedures and ISO 9001 principles.
Prepare inspection reports and quality observations.
Track quality performance and corrective action closure.
Prepare weekly and monthly quality reports.
Monitor key quality indicators including:
NCRs
Quality Observations
Inspection Pass Rate
Test Failures
Leakage / Pressure Test Failures
Material Rejections
Rework
Audit Findings
Corrective Action Closure
Highlight recurring quality issues and potential risks to Project Quality Management.
What Required Skills You’ll Bring
Bachelor's Degree in Civil Engineering, Water / Environmental Engineering, Mechanical Engineering, or a related discipline.
Minimum 5 years of relevant experience in quality assurance / quality control for wet utilities, water, wastewater, drainage, irrigation, or infrastructure projects.
Experience on major airport, infrastructure, transportation, or multidisciplinary construction projects is preferred.
Strong understanding of wet utility installation, inspection, testing, and commissioning.
Experience with water supply, sewerage, stormwater, drainage, fire water, irrigation, pumping stations, and underground utility networks.
Good knowledge of ITPs, Method Statements, MIRs, WIRs, NCRs, inspection procedures, and testing documentation.
Experience with pressure testing, hydrostatic testing, leakage testing, flushing, disinfection, and drainage testing.
Experience working with Contractors, Subcontractors, Consultants, and Client representatives.
Good understanding of applicable utility, water, drainage, and infrastructure standards.
Knowledge of ISO 9001 quality management principles.
Quality certification such as ISO 9001, CQI, or equivalent is an advantage.
Strong communication, coordination, reporting, and problem-solving skills.
What Desired Skills You’ll Bring
Wet Utilities Quality Management
Water Supply Quality
Sewerage Quality
Stormwater & Drainage Quality
Fire Water Quality
Irrigation Quality
Pumping Station Quality
Pipeline Installation
Pipe Pressure & Leakage Testing
ITP Management
Material Inspection
Inspection & Testing
NCR Management
Corrective & Preventive Actions
Quality Auditing
Contractor Quality Management
Utility Interface Coordination
Technical Documentation
Quality Reporting
Airport / Infrastructure Quality
Problem Solving
Stakeholder Coordination
We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY!
Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to .
رقم الإعلان لدى المصدر: R184800